Select Your Region
- Manufacturer: Valley Chemical Solutions
- Product Line: Valley Chemical Cleaning Solutions and Sanitizers
- Product: LFI SANITIZER
- Industries: Agriculture | Care Chemicals
- Authorized Countries: Canada | United States
LFI SANITIZER
LFI SANITIZER is an EPA registered low-foaming iodophor sanitizer. LFI Sanitizer is EPA registered for use in the beer-bottling, soft drink-bottling and food-canning industries. LFI SANITIZER can also be used equipment sanitizing for vats, tanks and other equipment.
Quantity
Documents
Specifications
CAS number: 7553-56-2
Physical state: Liquid
Appearance: Dark Brown
Water solubility: Soluble
Specific Gravity: 1.03
Primary Chemistry:
Iodine
- Manufacturer: Valley Chemical Solutions
- Product Line: Valley Chemical Cleaning Solutions and Sanitizers
- Product: LFI SANITIZER
- Industries: Agriculture | Care Chemicals
- Authorized Countries: Canada | United States
Manufacturer
Product Line
Product
Industries
Authorized Countries
Canada
United States
Overview
LFI SANITIZER is an EPA registered low-foaming iodophor sanitizer at a concentration of 1.6% titratable iodine. LFI SANITIZER is blended with a low-foaming mild surfactant blend to minimize skin irritation. Due to these mild surfactants, LFI SANITIZER can be applied by spray, mop, sponge, immersion or through CIP applications.
LFI SANITIZER is approved for usage as a sanitizer in bottling plants (beer, soft-drink, milk-bottling), and food-canning industries.
LFI SANITIZER EPA registration # 4959-18 (EPA Est. no 4959-IL-01 (E), 4959-TX-01 (D), 4959-CA-01(F)). Request the product EPA label for more details and directions of use.
Specifications
CAS number: 7553-56-2
Physical state: Liquid
Appearance: Dark Brown
Water solubility: Soluble
Specific Gravity: 1.03
Primary Chemistry:
Iodine
Features & Benefits
- EPA approved sanitizer
- Organic soil tolerance
- Effectiveness over a wide range of bacterial, viral, and other micro-organic contaminants
- Dilution rates:
- 1 ounce of LFI Sanitizer to 5 gallons water = 25 ppm
- 2 ounces of LFI Sanitizer to 5 gallons water = 50 ppm
- Equipment Sanitizing:
- Pre-clean: wash with cold or lukewarm water with a 25 ppm active
- Sanitize: 25 ppm clean solution with 1 minute contact time, then drain sanitizing solution.
- Tank and Vat Sanitizing:
- Pre-clean: wash with cold or lukewarm water with a 25 ppm active
- Sanitize: 25 ppm spray, or fill vat and allow 5 minute contact time prior to draining off solution
- Sanitizing of walls, floors, conveyors, and food contact solution.
- Pre-clean surfaces by scraping or flushing to remove soil. Then clean with 50 ppm solution, then rinse with potable water. Sanitize with 25 ppm and allow 2 minutes of contact time (do not rinse, allow to dry)
- Beverage Containers:
- Sanitize previously cleaned containers that were first washed with detergent and rinsed use a solution of 25 ppm with 1 minute of contact time. Invert containers, drain, and allow to air dry (do not rinse).
Problems Solved
High foaming of iodophor sanitizers
Limited tolerance to soils and organic contaminants
Low effectiveness against a particular type of microbes
Applications
Equipment sanitization
Tank sanitization
Vat sanitizer
Sanitization of walls
Sanitization of floors and hard surfaces
Sanitization of conveyors
Sanitization
of processing equipment
Sanitization of food contact surfaces
EPA registered sanitation of beverage containers
EPA registered sanitation of food-canning containers
Related Applications
Care Chemicals
Related CAS Numbers
Care Chemicals
Related Chemistries
Care Chemicals
Related Functions
Valley Chemical Cleaning Solutions and Sanitizers Articles
Valley Chemical Executive Brand Cleaners and Sanitizers
Valley Chemical Solutions offers a broad range of EPA registered cleaners and disinfectants. The products can be used in a wide range of applications from cleaning to hard surface disinfection and sanitization.
Valley Chemical Solutions PeraShine™
PeraShine™ brings you the broad spectrum microbiological sanitizing power of conventional peroxyacetic acid (PAA) sanitizers while saving you money through control by conductivity and its unique ability to mitigate mineral film build up. When using PeraShine™, there is no need for a separate acid rinse.
ChemPoint Is Here to Help
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - United States
