LOCTITE® AA 3963 is a transparent, low-viscosity light-curing acrylic adhesive that bonds rigid plastics and metals. It cures rapidly under UV or visible light and is suitable for medical-device and general-purpose rigid bonding applications.
Viscosity (uncured): 250–450 mPa·s at 25 °C (cone & plate, 100 s⁻¹)
Specific gravity (uncured) ≈ 1.02 at 25 °C
Cure method: UV / visible light exposure
Typical fixture time (at 10 mW/cm², 405 nm LED): ≤ 10 seconds for 0.1 N/mm² shear strength
Tack free time (high intensity LED, 405 nm, 1 400 mW/cm²): 5–10 seconds
Cured bond properties: Shore D hardness ~71, elongation ~38%, tensile strength ~23 N/mm²
Typical substrates: stainless steel, polycarbonate, ABS, acrylic, HDPE/PP when pre-treated, other rigid plastics and metals;
Primary Chemistry:
Acrylic ester, light-cure (acrylated urethane)
LOCTITE® AA 3963 is engineered for assemblies that require fast, dependable bonding of rigid substrates such as stainless steel, polycarbonate, ABS, acrylic and treated polyolefins. When exposed to UV or visible light, AA 3963 cures to a strong, rigid bond that resists humidity and ageing, making it ideal for medical devices, precision components and industrial assemblies. The low-viscosity formulation enables efficient dispensing and uniform coverage even on small or intricate parts. Its capacity for rapid, tack-free cure supports high throughput in production environments.
Eliminates long curing cycles linked to two-part adhesives, speeding up production.
Prevents incomplete or weak bonding on rigid substrates such as metals and engineering plastics.
Removes variability caused by manual mixing or multi-component adhesives.
Supports medical-device and clean-environment manufacturing by providing a clean, stable bond.
Ensures consistent adhesive coverage in small, precision or high-volume assemblies.
Use LOCTITE® AA 3963 to bond rigid plastics, metals or combinations thereof. Ensure bonding surfaces are clean and dry. Dispense adhesive and assemble parts. Expose the joint to UV or visible light of adequate intensity to cure rapidly. The low-viscosity formulation ensures even coverage, even on intricate or small parts. Appropriate for medical-device assembly, electronics housings, rigid plastic or metal component bonding, and general rigid bonding tasks where a fast and durable bond is required.
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
