TEXTURECEL™ 1000 PA 07 is a high purity sodium carboxymethyl cellulose powder. it is used as a binder in welding electrodes and lithium ion batteries.
Viscosity, Brookfield, LVT, SP.2, 30 rpm, 2% aqueous sol. (dry basis), 25°C: 300- 600 cP
Substitution degree: 0.65 — 0.80
pH Value, 1% aqueous solution 6.5 — 8.5;
Primary Chemistry:
Sodium Carboxymethylcellulose
TEXTURECEL™ 1000 PA 07 is low molecular weight, high purity sodium carboxymethyl cellulose (CMC). It has lower carboxyl substitution than standard TEXTURECEL™ grades. TEXTURECEL™ 1000 PA 07 is used to thicken water-based formulations. It provides a viscosity of 1000 cP when added to water at a 2% addition rate. TEXTURECEL™ 1000 PA 07 is well suited for welding electrode applications and lithium ion battery applications because of it's purity. In welding electrodes TEXTURECEL™ 1000 PA 07 is used as a binder. It stabilizes the consistency of sodium silicate, helps to disperse additives, acts as a lubricant for the extrusion process, increases strength, and reduces breaking. In Lithium battery applications, TEXTURECEL™ 1000 PA 07 improves the dispersion of conductive material, increases mechanical integrity of electrodes, and improve adhesion to current collectors.
Shortened battery life due to failure of the anode
Poor cohesion of welding electrodes
Lithium Ion Batteries; Welding Electrodes
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
