
Find a Product
513 Products
1
TrusTec™ Diesel Cetane Check Fuel Low is a secondary reference fuel with an average cetane value of 40.74 for ASTM D-613 testing.
2
TrusTec™ Toluene Standard Fuel 96.9 is a primary reference fuel with 74.3% toluene, 21.3% n-heptane, and maximum 5.3% isooctane.
3
TrusTec™ Diesel Cetane Check Fuel High is a primary reference fuel with a cetane value of 51.39 for ASTM D-613 testing.
4
NEOBEE® M-5 is a caprylic/capric triglyceride made from glycerol and 66% C8 and 32% C10 medium chain fatty acids from coconut and palm kernel oils. MCTs (medium chain triglycerides) are the healthier choice because they are efficient in metabolizing fat for energy.
5
Suttocide™ A is a clear alkaline liquid that is cost-effective and provides broad spectrum protection against Gram-positive bacteria, Gram-negative bacteria, yeast and mold.
6
Clarinol® G-80 CLA is food-grade 80% Conjugated Linoleic Acid (CLA) mainly in triglyceride form. It is made from natural safflower oil and it is used in weight loss supplements and food products.
7
Sunett® Ace K Pharma Grade C is a sugar substitute that works best for compressed tablets and powdered mixes. Pharma grades comply with United States Pharmacopeia (USP), National Formulary (NF) and European Pharmacopoeia (EP) standards.
8
Low-molecular weight liquid ethylene propylene (EPDM) terpolymer has 9.5% diene content and is used in rubber, coatings and adhesives.
9
POLYOX™ WSR Coagulant water-soluble poly(ethylene oxide) polymer commonly used as a film former and rheology modifier in personal care and concrete applications.
10
Germall™ 115 is a classic preservative effective that deliver efficient antimicrobial power to personal care products with a range of 3.0-9.0 pH.
11
TrusTec™ Diesel Secondary Reference Fuel T-32 is a secondary Reference Fuel with an Average Cetane Value of 73.61 for Use in ASTM D-613 Testing
12
Inhibited propylene glycol (PG) based thermal fluid with very low toxicity for HVAC
13
Benecel™ K100M is a white to ivory powder producing a viscosity of 75,000 - 140,000 mPas when used at 2%. It is especially effective at improving the lather and mildness of soap based rinse-off formulations.
14
CELLOSIZE™ QP-100MH is a high molecular weight, hydroxyethyl cellulose polymer. It is used as a thickener in water based coatings, inks, and adhesives
15
Balanced, synergistic and boasting broad-spectrum protection, Optiphen™ preservatives are compatible with many other cosmetic ingredients.
16
METHOCEL™ E5 Premium LV a low molecular weight hydroxypropyl methylcellulose (HPMC) thickener. It yields a viscosity of ~5 cP at 2% addition in water.
17
METHOCEL™ F50 is a low molecular weight hydroxypropyl methylcellulose (HPMC) thickener. It yields viscosity of 50 cPs at 2% in water.
18
METHOCEL™ 228S is a modified HPMC that is used as a thickener, water retention aid, and lubricant agent, in plasters, mortars, adhesives, tape joint compounds, crack fillers, and other flexible construction materials.
19
METHOCEL™ J75MS is a surface treated hydroxypropyl methylcellulose (HPMC) thickener. It will yield a viscosity of 75,000 cP at 2% in water. Hydration is delayed and typically triggered with a pH adjustment.
20
METHOCEL™ F4M is a medium molecular weight hydroxypropyl methylcellulose (HPMC) thickener. At addition levels of 2%, it yields a viscosity of 4,000 cP. It is widely used in ceramics processing, coatings, adhesives, and chemical processing.