Density: 1.25 g/cm³
Density, specific gravity: 1.25 g/cm³
Change in volume (in reference fuel B, 27°C, 168 hrs): 29%
Change in volume (in ASTM #1 oil, 100°C, 168 hrs): −8.0%
Change in volume (in IRM 903 oil, 100°C, 168 hrs): 23%
Change in volume (in water, 100°C, 168 hrs): 10.0%
Melt viscosity (190°C, 300 sec−1): 800 Pa·s
Tensile stress at 100% (1.90 mm): 7.9 MPa
Tensile stress at 100% (125°C, 1.90 mm): 9.4 MPa
Tensile stress at yield (1.90 mm): 7.9 MPa
Tensile stress at yield (125°C, 1.90 mm): 9.4 MPa
Tensile strength at yield (1.90 mm): 13.1 MPa
Tensile strength at yield (125°C, 1.90 mm): 14 MPa
Tensile strain at break (1.90 mm): 210%
Tensile strain at break (125°C, 1.90 mm): 190%
Torsion modulus (24°C, 1.9 mm): 2.9 MPa
Torsion modulus (−20°C, 1.9 mm): 19.9 MPa
Tensile set: 8%
Clash-Berg modulus (−34°C): 68.9 MPa
Tensile elongation at break (125°C, 1.90 mm): 190%
Tensile elongation at break (1.90 mm): 210%
Tear strength (Die C, 1.90 mm): 24.5 kN/m
Ductile/Brittle transition temperature: −47.2°C
Ductile/Brittle transition temperature: −44°C
Change in Shore hardness in air (Shore A, 125°C, 168 hrs): −2.0
Shore hardness (Shore A, 1.90 mm, compression molded): 72
Change in durometer Hardness in Air (Shore A, 125°C, 168 hrs): −2.0
Durometer hardness (Shore A, 1.90 mm, compression molded): 78
Compression set (24°C, 22 hrs, Method B): 15%
Compression set (100°C, 22 hrs, Method B): 55%
Compression set (24°C, 22 hrs): 15%
Compression set (100°C, 22 hrs): 55%
Taber abrasion resistance (CS-17 Wheel, 1,000 g, 1,000 cycles): 5.00 mg
Melt temperature: 177°C
Primary Chemistry: Melt-processable rubber resin