Select Your Region
- Manufacturer: LyondellBasell
- Product Line: LyondellBasell Soft Polymers
- Product: Alcryn® Melt-Processable Rubber
- Industries:
- Authorized Countries: Canada | United States
Alcryn® 2060CL
Alcryn® 2060CL is a translucent, 60 Shore A melt‑processable rubber offering high flow, excellent heat, oil, ozone, UV, and weather resistance for injection molded and extruded seals, tubing, wire and cable, and flexible components.
Quantity
Documents
Specifications
Density: 1.12 g/cm³
Density, specific gravity: 1.12 g/cm³
Change in volume (in reference fuel B, 27°C, 168 hrs): 8%
Change in volume (in ASTM #1 oil, 100°C, 168 hrs): −30%
Change in volume (in IRM 903 oil, 100°C, 168 hrs): −6%
Change in volume (in water, 100°C, 168 hrs): 9.0%
Melt viscosity (190°C, 300 sec−1): 247 Pa·s
Tensile modulus (1.91 mm, compression molded): 3.0 MPa
Tensile strength at yield (1.91 mm, compression molded): 7.24 MPa
Tensile set: 12%
Tensile elongation at break (125°C, 1.90 mm): 340%
Tensile elongation at break (1.91 mm, compression molded): 380%
Tear strength (Die C, 1.90 mm): 26.3 kN/m
Ductile/Brittle transition temperature: −85°C
Change in Shore hardness in air (Shore A, 125°C, 168 hrs): 61
Durometer hardness (Shore A, 1.90 mm, compression molded): 60
Compression set (24°C, 22 hrs, Method B): 27%
Compression set (100°C, 22 hrs, Method B): 69%
Compression set (24°C, 22 hrs): 27%
Compression set (100°C, 22 hrs): 69%
Processing (melt) temp: 177°C
Primary Chemistry:
Melt-processable rubber resin
- Manufacturer: LyondellBasell
- Product Line: LyondellBasell Soft Polymers
- Product: Alcryn® Melt-Processable Rubber
- Industries:
- Authorized Countries: Canada | United States
Manufacturer
Product Line
Product
Industries
Authorized Countries
Canada
United States
Overview
Alcryn® 2060CL is a translucent version of melt-processable rubber resin that allows for the reprocessing of production scrap. With a Shore A hardness of approximately 60, Alcryn® 2060CL provides a balance of softness and durability for thin‑wall profiles and overmolded components.
Specifications
Density: 1.12 g/cm³
Density, specific gravity: 1.12 g/cm³
Change in volume (in reference fuel B, 27°C, 168 hrs): 8%
Change in volume (in ASTM #1 oil, 100°C, 168 hrs): −30%
Change in volume (in IRM 903 oil, 100°C, 168 hrs): −6%
Change in volume (in water, 100°C, 168 hrs): 9.0%
Melt viscosity (190°C, 300 sec−1): 247 Pa·s
Tensile modulus (1.91 mm, compression molded): 3.0 MPa
Tensile strength at yield (1.91 mm, compression molded): 7.24 MPa
Tensile set: 12%
Tensile elongation at break (125°C, 1.90 mm): 340%
Tensile elongation at break (1.91 mm, compression molded): 380%
Tear strength (Die C, 1.90 mm): 26.3 kN/m
Ductile/Brittle transition temperature: −85°C
Change in Shore hardness in air (Shore A, 125°C, 168 hrs): 61
Durometer hardness (Shore A, 1.90 mm, compression molded): 60
Compression set (24°C, 22 hrs, Method B): 27%
Compression set (100°C, 22 hrs, Method B): 69%
Compression set (24°C, 22 hrs): 27%
Compression set (100°C, 22 hrs): 69%
Processing (melt) temp: 177°C
Primary Chemistry:
Melt-processable rubber resin
Features & Benefits
- Rubberlike elasticity with thermoplastic productivity
- Translucent for custom color formulations or clarity requirements
- High heat, oil, and ozone resistance
Problems Solved
Slow thermoplastic cycle times or poor processing efficiency
Limited material options for translucent or natural‑appearance rubber parts
Premature degradation from heat, oil, or ozone
Noise and vibration transmission in flexible components
Applications
Cable jacketing
Wire insulation and protective sheathing
Weather-resistant sealing profiles
Extruded sealing profiles
Seals and gaskets
Industrial elastomeric parts
Industrial tubing
Calendered and fabric coatings
Overmolded elastomeric components
Firm elastomeric sheets
ChemPoint is here to help
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Canada
