Aculon® NanoProof® 3-02 is a specialty nano-coating containing 2% solids for an ultrathin surface film with excellent hydrophobicity and oleophobicity for printed circuit boards (PCB) and electronic components.
Product type: Fluorinated coating, electronic
Solids: 2.0%
Solvent: Fluorosolvent
Color: Light green
Viscosity: <20 cP
Boiling point of solvent: 56.2°C (133°F)
Specific gravity: 1.49 g/mL
Shelf life: 2 years
Cure time: ~5 minutes at ambient (25°C)
Aculon® NanoProof® 3-02 is an innovative light-green coating formulation designed to protect electronic components and printed circuit boards (PCBs) from environmental damage and corrosion. NanoProof® 3-02 is compatible with a wide range of metals, polymers, and semiconductor materials, such as polystyrene, PPS, PET, ABS, glass, aluminum, and stainless steel .
NanoProof® 3-02 is a versatile solution that can be applied using brush, spray, flow coat, or dip application methods. As an ultrathin coating formula, Aculon® NanoProof® 3-02 effectively stops the bleed out and spread of epoxies, resin, and underfill materials. The coating provided by Aculon® NanoProof® 3-02 is cured at ambient temperatures of approximately 25°C; typically, around five minutes of cure time is required.
Product type: Fluorinated coating, electronic
Solids: 2.0%
Solvent: Fluorosolvent
Color: Light green
Viscosity: <20 cP
Boiling point of solvent: 56.2°C (133°F)
Specific gravity: 1.49 g/mL
Shelf life: 2 years
Cure time: ~5 minutes at ambient (25°C)
Damage to coated electronic components
Insufficient moisture or corrosion protection for PCBs or electronic surfaces
Aculon® NanoProof® 3-02 is a high-quality coating for the electronics industry and can be applied in a variety of methods, including but not limited to the following:
Dip coating
Spraying
Brushing, hand applied
Automatic dispenser or flow coat
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
