Select Your Region
- Manufacturer: Aculon
- Product Line: NanoProof® Electronic Grade Coatings
- Product: Aculon® Stencil Wipes
- Industries: Coatings | Maintenance, Repair, Overhaul
- Authorized Countries: Austria | Benelux | Canada | France | Germany | Italy | Mexico | Spain | Switzerland | United Kingdom | United States
NanoClear®
Aculon® NanoClear® is an advanced, nonstick surface treatment for enhancing the performance of SMT stencils by providing a hydrophobic and oleophobic surface. It provides an ultrathin coating that improves paste release, enhances print quality, and boosts productivity by reducing the need for recurrent cleaning and downtime.
Quantity
Documents
Specifications
Product type: Two-part cleaning wipe, nano-coating
- Manufacturer: Aculon
- Product Line: NanoProof® Electronic Grade Coatings
- Product: Aculon® Stencil Wipes
- Industries: Coatings | Maintenance, Repair, Overhaul
- Authorized Countries: Austria | Benelux | Canada | France | Germany | Italy | Mexico | Spain | Switzerland | United Kingdom | United States
Manufacturer
Product Line
Product
Industries
Authorized Countries
Austria
Benelux
Canada
France
Germany
Italy
Mexico
Spain
Switzerland
United Kingdom
United States
Overview
Aculon® NanoClear® is an ultrathin (2–4 nanometers), monolayer flux-repellent coating designed to be applied to SMT stencil aperture walls to provide a nonstick surface with hydrophobic and oleophobic properties. NanoClear® promotes paste-release efficiency and print quality of technology assemblies by reducing the variation and risk of cracks, flakes, or chips.
This best-in-class surface treatment can be applied quickly and easily to the bottom side and aperture walls of stencils in an ultrathin coat less than 5 nanometers, so as not to alter the aperture size or foil thickness of the stencil. By minimizing the need for frequent cleaning, Aculon® NanoClear® also increases printing cycles, minimizes downtime, and reduces the stencil wiping and cleaning frequency of assemblies, ultimately improving throughput and reducing cost.
Specifications
Product type: Two-part cleaning wipe, nano-coating
Features & Benefits
- Monolayer nonstick treatment for stencil aperture walls
- Hydrophobic and oleophobic
- Nonstick
- Promotes paste-release efficiency
- Improves process yields
- Fast and easy to apply
- Reduces defects
- Enhanced printing
- Higher yields
- Less underwiping
Problems Solved
Prolonged printing cycles from frequent cleaning needs
Cracks, flakes, or chips from thick spray coatings
Applications
NanoClear® is a premier nano-coating for SMT stencils in the electronics industry that can be used successfully across a range of applications, including but not limited to the following:
Nonstick surface for stencil aperture walls
SMT stencils
How to Apply NanoClear® Wipes?
The NanoClear® SMT stencil is provided in a dual-wipe system for optimal application and should be applied with the following steps:
1. Ensure the SMT stencil is visibly clean and degreased
2. Open Part A cleaner, and scrub the bottom of the SMT stencil for approximately 60 seconds with heavy pressure
3. Rinse with flowing deionized (DI) water until the cleaner is thoroughly removed (tap water will work, but DI is preferred)
4. Dry SMT stencil after water rinse
5. Open Part B cleaner, and scrub the bottom of the SMT stencil for approximately 60 seconds with heavy pressure
6. Dry with a clean room wipe for approximately 60 seconds, and check for water beading for accurate surface application
If you have questions about the application process, please reach out to a ChemPoint representative.
Related Applications
Related Benefits
Maintenance, Repair, Overhaul
Related Chemistries
Maintenance, Repair, Overhaul
Related End Markets
Maintenance, Repair, Overhaul
Related Functions
Maintenance, Repair, Overhaul
ChemPoint Is Here to Help
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Mexico
