Select Your Region
LFI Sanitizer is an EPA registered low-foaming iodophor sanitizer. LFI Sanitizer is EPA registered for use in the beer-bottling, soft drink-bottling and food-canning industries. LFI Sanitizer can also be used equipment sanitizing for vats, tanks and other equipment.
LFI Sanitizer is an EPA registered low-foaming iodophor sanitizer at a concentration of 1.6% titratable iodine. LFI Sanitizer is blended with a low-foaming mild surfactant blend to minimize skin irritation. Due to these mild surfactants, LFI Sanitizer can be applied by spray, mop, sponge, immersion or through CIP applications.
LFI Sanitizer is approved for usage as a sanitizer in bottling plants (beer, soft-drink, milk-bottling), and food-canning industries.
LFI Sanitizer EPA registration # 4959-18 (EPA Est. no 4959-IL-01 (E), 4959-TX-01 (D), 4959-CA-01(F)). Request the product EPA label for more details and directions of use.
Physical state: Liquid
Appearance: Dark Brown
Water solubility: Soluble
Specific Gravity: 1.03
Primary Chemistry: Iodine
EPA approved sanitizer
Organic soil tolerance
Effectiveness over a wide range of bacterial, viral, and other micro-organic contaminants
Dilution rates:
1 ounce of LFI Sanitizer to 5 gallons water = 25 ppm
2 ounces of LFI Sanitizer to 5 gallons water = 50 ppm
Equipment Sanitizing:
Pre-clean: wash with cold or lukewarm water with a 25 ppm active
Sanitize: 25 ppm clean solution with 1 minute contact time, then drain sanitizing solution.
Tank and Vat Sanitizing:
Pre-clean: wash with cold or lukewarm water with a 25 ppm active
Sanitize: 25 ppm spray, or fill vat and allow 5 minute contact time prior to draining off solution
Sanitizing of walls, floors, conveyors, and food contact solution.
Pre-clean surfaces by scraping or flushing to remove soil. Then clean with 50 ppm solution, then rinse with potable water. Sanitize with 25 ppm and allow 2 minutes of contact time (do not rinse, allow to dry)
Beverage Containers:
Sanitize previously cleaned containers that were first washed with detergent and rinsed use a solution of 25 ppm with 1 minute of contact time. Invert containers, drain, and allow to air dry (do not rinse).
High foaming of iodophor sanitizers
Limited tolerance to soils and organic contaminants
Low effectiveness against a particular type of microbes
Equipment sanitization
Tank sanitization
Vat sanitizer
Sanitization of walls
Sanitization of floors and hard surfaces
Sanitization of conveyors
Sanitization
of processing equipment
Sanitization of food contact surfaces
EPA registered sanitation of beverage containers
EPA registered sanitation of food-canning containers
Your document download will begin shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
The document currently is provided in the following languages from the supplier at this time.
The document currently is provided in the following languages from the supplier at this time.
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Canada