LFI SANITIZER

• EPA approved sanitizer
• Organic soil tolerance
• Effectiveness over a wide range of bacterial, viral, and other micro-organic contaminants
• Dilution rates:
• 1 ounce of LFI Sanitizer to 5 gallons water = 25 ppm
• 2 ounces of LFI Sanitizer to 5 gallons water = 50 ppm
• Equipment Sanitizing:
• Pre-clean: wash with cold or lukewarm water with a 25 ppm active
• Sanitize: 25 ppm clean solution with 1 minute contact time, then drain sanitizing solution.
• Tank and Vat Sanitizing:
• Pre-clean: wash with cold or lukewarm water with a 25 ppm active
• Sanitize: 25 ppm spray, or fill vat and allow 5 minute contact time prior to draining off solution
• Sanitizing of walls, floors, conveyors, and food contact solution.
• Pre-clean surfaces by scraping or flushing to remove soil. Then clean with 50 ppm solution, then rinse with potable water. Sanitize with 25 ppm and allow 2 minutes of contact time (do not rinse, allow to dry)
• Beverage Containers:
• Sanitize previously cleaned containers that were first washed with detergent and rinsed use a solution of 25 ppm with 1 minute of contact time. Invert containers, drain, and allow to air dry (do not rinse).

High foaming of iodophor sanitizers
Limited tolerance to soils and organic contaminants
Low effectiveness against a particular type of microbes