High Performance Silicone Adhesives

    Adhesives for basic applications are usually based on acrylic or rubber technologies.  These adhesives are cost effective but often fall short when exposed to extreme temperatures or harsh chemicals.  Momentive's SilGrip™ pressure sensitive adhesives are designed to hold up in applications where other adhesives fail and should be used where high performance adhesion is critical.  The silicone backbone of SilGrip™ adhesives allows for maintained flexibility and adhesion in even the most challenging environments.

SilGrip™ PSA529 & PSA6573A

Traditionally, Momentive’s PSA offering focused on pressure sensitive adhesives for the tape and label markets.  Now, this same proven technology is available in a contact adhesive format.  SilGrip™ PSA529 and PSA6573A offer outstanding adhesion to flexible and low energy substrates. These adhesives are chemically resistant and show minimal effects when exposed to extreme weather and large temperature changes that can commonly occur in aerospace and automotive applications.  PSA529 and PSA6573 also offer superior electrical insulation and are used in cable wrap applications to shield wires and cables from electrically conductive environments.  See the videos below for a more details about these adhesives and how to properly use them.

    Introduction to PSA529 & PSA6573A

    How to Use PSA529 & PSA6573A

Technical features, physical properties, and general use instructions are outlined in the data sheets linked below.  ChemPoint has dedicated product specialists available to answer any questions and assist you with your application.

SilGrip™ PSA529                                                 SilGrip™ PSA6573A

Features & Benefits of SilGrip™ Adhesives

    SilGrip™ adhesives offer peel strength over 2000 g/in and perform well in high shear applications like aerospace & automotive.
    SilGrip™ adhesives can be used to bond difficult substrates with low surface energy like silicone, plastics, and foils.
    Consistent adhesive performance can be achieved from -73° C to 250° C by using SilGrip™.
    SilGrip™ adhesives show minimal effect from chemicals and environmental exposure.
    SilGrip™ adhesives are excellent insulators and are used to isolate cables in electrical environments.
    SilGrip™ is the adhesive of choice for applications that require oxygen permeable films.

Get a Sample

PHONE  425.372.9464