The largest chemical company in the world, BASF develops, produces and markets a comprehensive portfolio of more than 600 intermediates around the world including amines, diols, polyalcohols, acids and specialties. Among other applications, intermediates are used as starting materials for coatings, plastics, pharmaceuticals, textile fibers, detergents and crop protectants. In addition, the company offers a broad range of ingredients for hygiene, personal care, home care, industrial & institutional cleaning, and technical applications with such high performance products as surfactants, emulsifiers, polymers, emollients, chelating agents, cosmetic active ingredients, pigments, UV filters and superabsorbent polymers developed for the full spectrum of hygiene applications.
2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.
Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions
Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.
Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water
Cationic antistat - >= 25.0 - < 50.0% alkyl dimethylethyl ammonium ethosulfate quat.
One of the most widely used cationic antistats in the world is LAROSTAT® 264 A, an alkyl dimethylethyl ammonium ethosulfate quat. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. LAROSTAT® 264 A is usually the antistat of choice for general applications where temperature or FDA requirements are not an issue. It is used for both internal and topical applications. Appearance @ 25°C Clear Amber Liquid Color, Gardner:12 max. Solids, % @ 105°C, 1.5 Hrs: 34.0 – 36.0 pH, 30 % Aqueous: 5.0 – 6.5 Viscosity @ 50°C, cSt: 230 – 330 Compatible with complex chemical systems including many anionic systems. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. It is used for both internal and topical applications. Polyurethane, Polystyrene, Rigid PVC, Fiberglass, Textiles, Dust control, Floor finishes, General purpose
Waterfree polyethylenimine with a molecular weight around 1,300.
Lupasol® G 20 Waterfree, is a anhydrous multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 1,300 Viscosity: 8,000 Concentration: 98% Color: clear, colorless to yellowish liquid Anhydrous Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.
Era has a unique compilation of polyurethane solutions that include high performance hot cast elastomer prepolymers, spray polyurethane, rigid and flexible foam systems, as well as other specialty products.Learn More
Tospearl® series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.Learn More
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.Learn More