Bostik is a leading global adhesive specialist in industrial manufacturing, construction, and consumer markets. For more than a century, they have been developing innovative adhesive solutions that are smarter and more adaptive to the forces that shape people’s daily lives. From cradle to grave, from home to office, Bostik’s smart adhesives can be found everywhere. With 2014 sales of 1.5 € billion, the company employs 4,900 people and has a presence in more than 40 countries.
Bostik is an Arkema company.
Heavy-duty anti-seize and extreme-pressure lubricant formulated to assure absolute parts protection against seizure, galling, and corrosion in fresh and salt water environments.
Mariner's Choice offers unparalleled resistance to water washout and the best protection in continuous high-moisture environments, both above and below water lines. Color: Black-Gray Temperature Range, °F (°C): -297°F to 2,450°F (-183°C to 1,343°C) Thickener Type: Calcium Complex Particle Size, mil (microns): 3.5 maximum (75 μ) Density (g/cm3): 1.31 to 1.39 Flash Point, °F (°C): >475°F (246°C) Salt Fog Test, hrs.: 4,000 Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No Corrosion Worked Penetration, 60 Strokes @ 77°F (25°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): 572 (300) Torque Coefficient, k factor: 0.11 Water Washout, % loss: @ 100°F: <1.00 @ 175°F: <2.75 Bearing Rust Test (ASTM D-1764): Pass Four Ball EP: Load Wear Index: 127.3 Last non-seizure load (scar): 100 kgf (0.45 mm) Last Seizure Load (scar): 620 kgf (2.21 mm) Weld Load: 800 kgf Fretting Wear @ 73°F (23°C), 22 hrs., mg loss: 7.15 Prevents seizure at temperatures up to 2,450°F (1,343°C) Prevents galvanic corrosion in salt and fresh water environments Superior resistance to water washout and water spray Excellent extreme pressure lubricating properties Low torque factor Compatible with soft metals Contains no copper Tested to MIL-A-907E Available in the following sizes: • NMCBT-8 (8 oz. brush top can) • NMCBT-16 (1 lb. brush top can) • NMC-42 (42 lb. pail) Bilge pumps, screw shafts, prop shaft bearing housing, winches, cables, anchor lines, porthole studs, rigging and hoist cables, Steel mills, suspension bridges, wind turbines, offshore rigging and other applications exposed to harsh salt water and fresh water conditions
Long open time polyamide hot melt designed for bonding a wide variety of substrates.
Thermogrip® 6239 is a long open time polyamide, hot melt designed for bonding a wide variety of substrates. This high performance adhesive bonds wood, metal, and most plastics, including PVC, and exhibits excellent resistance to plasticizer migration. The Thermogrip® 6239 formula meets General Motors Specification 9985878 for seat bonding. Color: Amber Size (dia. x length): 1/2" x 10" Odor: Light Melt Point (R&B): 284°F (140°C) Specific Gravity: .96 gms/cc Viscosity, cps: @ 375°F 6,000 @ 400°F 3,900 Open Time: Up to 75 secs. Temperature Resistance: 0°F to 239°F (-18°C to 115°C) Low application viscosity High temperature resistance Good low temperature flexibility Long open time Resistance to plasticizer migration Meets General Motors Specification 9985878 for seat bonding Furniture assembly: vinyl-to-vinyl, wood or plastic Automotive repair Wood cabinet assembly Filter assembly
Long lasting Krytox™ oils and greases not only help you achieve optimal performance for your critical applications, but they can also help protect your components under extreme operating conditions.Learn More
This ready-to-use solution allows easy miscibility in a variety of raw materials: soy, rapeseed, sunflower, palm, and a wide variety of other sources.Learn More
For years, Eastman Cellulose Esters have found widespread use in coatings and inks applications to address a number of issues.Learn More