Chevron Phillips Chemical Company LP is a wholly-owned subsidiary of Chevron Phillips Chemical Company LLC, one of the world’s top producers of olefins and polyolefins and a leading supplier of aromatics, alpha olefins, styrenics, plastic piping and polymer resins. The company’s Specialty Chemicals group offers a wide range of sulfur-based chemicals, alkanes, alkenes, aromatics, mining chemicals and natural gas odorants that are distributed across the globe. The LLC and its affiliates own more than $9 billion in assets and employ approximately 4,700 people at 38 manufacturing and research facilities in eight countries. Chevron Phillips Chemical Company LLC is equally owned by Chevron Corporation and Phillips 66, and is headquartered in The Woodlands, Texas, USA.
Diesel Cetane Check Fuel High is a Primary Reference Fuel with a Cetane Value of 52.45
Diesel Cetane Check Fuel High is commonly used to determine the quality and performance of diesel fuel. The higher Cetane will provide shorter ignition delay periods than lower Cetane fuels. API Gravity : 38.30 Viscosity, 40°C, cSt : 2.44 Flash Point, PMCC, °F : 156.7 Aniline Point, °C : 66.92 Sulfur, wt% : 0.0007 Saturates : 75.03 Olefins : 2.83 Aromatics : 22.52 IBP : 360.6 10% : 420.4 50% : 494.3 90% : 585.4 End : 650.0 Recovery : 97.88 Residue : 1.41 Loss : 0.81
Diesel Cetane Check Fuel Low is a Primary Reference Fuel with an average Cetane Value of 43.37
Diesel Cetane Check Fuel Low is commonly used to determine the quality and performance of diesel fuel. API Gravity : 35.05 Viscosity, 40°C, cSt : 2.39 Flash Point, PMCC, °F : 154.2 Aniline Point, °C : 58.82 Sulfur, wt% : 0.0022 Saturates : 68.75 Olefins : 2.29 Aromatics : 28.99 IBP : 352.8 10% : 414.0 50% : 488.8 90% : 583.9 End : 647.1 Recovery : 97.86 Residue : 1.11 Loss 0.93
Specific Gravity at 60/60 °F : 0.8330 – 0.8370 Ash, wt % : 0.010 max Neutralization No., TAN, mg KOH/g : 0.02 max Copper Corrosion, 3 h at 50 °C : 1 max Cloud Point, °F : 23 max Flash Point, °F : 131 min Sulfur, ppm : 300 max Viscosity at 40 °C, cSt : 2.5 – 3.5 Carbon Residue on 10% Bottoms, wt % : 0.20 max Conradson Carbon, wt % : 0.2 max Polynuclear Aromatics, wt % : 3.0 – 6.0 Distillation, °F 50% : 473 min 95% : 653 – 662 End Point : 698 max Oxidation Stability, mg/100mL : 2.5 max Cetane Number : 52 – 54
Diesel Secondary Reference Fuel T-30 is a Primary Reference Fuel with a Cetane Value of 74.87
Results from ASTM Subcommitee D02.01 calibration testing performed by the Diesel NEG Group for Diesel Secondary Reference Fuel T-30 Cetane: 74.87 Sulfur: 2.1 Viscosity: 2.36 Aromatics: 4.2 IBP: 406.8 Distillation 90%: 558.1
Diesel Secondary Reference Fuel U-30 is a Primary Reference Fuel with a Cetane Value of 20.32
Results from ASTM Subcommitee D02.01 calibration testing performed by the Diesel NEG Group for Diesel Secondary Reference Fuel U-30 Specific Gravity at 60/60 ºF : 0.8171 API Gravity : 41.7 Sulfur, ppm : 13.2 Flash Point, ºF : 112.89 Viscosity at 40 ºC, cSt : 1.770 Aniline Point, ºC : 59.09 Peroxides, mg/kg : None Detected Distillation Range at 760 mmHg, °F Initial Boiling Point : 294.8 10% : 359.2 50% : 414.5 90% : 549.3 End Point : 601.0 Recovery, % : 98.2 Residue, % : 1.3 Loss, % : 0.6 Hydrocarbon Type, vol % Aromatics : 32.1 Olefins : 1.1 Saturates : 66.8
Jet RF Aviation Test Fuel is used when running the AMS 2629B Type I method for reference fuel testing.
Jet RF Aviation Test Fuel is used when running the AMS 2629B Type I method for reference fuel testing. Color, Saybolt: 25 mins Specific Gravity at 60/60 °F: Report API Gravity: Report Neutralization number, mgKOH/g: 0.10 max Corrosion, 2 hrs at 50 °C: 1 max Water Reaction Interface: Report Sulfur, ppm: 4000-4400 Volume Change, mL: 2 max Composition, vol % Toluene: 27.0 - 29.0 Cyclohexane: 33.0 - 35.0 2,2,4-Trimethylpentane: 37.0 - 39.0 Di-t-butyl Disulfide: Report Unknown: Report t-Butyl mercaptan, wt % : 0.0045 - 0.0055 Test Fuel Aviation Refinery catalist
Long lasting Krytox™ oils and greases not only help you achieve optimal performance for your critical applications, but they can also help protect your components under extreme operating conditions.Learn More
This ready-to-use solution allows easy miscibility in a variety of raw materials: soy, rapeseed, sunflower, palm, and a wide variety of other sources.Learn More
For years, Eastman Cellulose Esters have found widespread use in coatings and inks applications to address a number of issues.Learn More
Hi, let us know if you have any questions as you visit our website.