Select Your Region
| Task | Dilution Rate | Application |
|---|---|---|
| Hard Surface Disinfection | 1:100 (10 grams of Rely+On® Virkon® to every liter of water) | Apply disinfectant solution using a trigger spray bottle, a suitable knapsack-type sprayer, cloth, sponge, or floor mop. Allow to dry before using treated areas. To disinfect hard surfaces, apply the solution at a rate of 200 mL/m2. |
| Equipment Disinfection (not for medical devices) | 1:100 (10 grams of Rely+On® Virkon® to every liter of water) | Suitable equipment can be submerged and washed in a disinfectant solution or sprayed and wiped clean with a cloth or sponge. Rinse disinfected equipment with clean water after 10 minutes when materials compatibility is of concern. |
| Wipes | 1:100 or 1:400* | Add solution to a suitable dry wipe system. |
| Fogging | 5% (1:20), with 10% MPG (monopropylene glycol) in water** | Prepare the solution by adding 50 grams of Rely+On® Virkon® to a mixture of 900 mL water and 100 mL MPG. Mix thoroughly and leave to stand for 10 minutes before use. Add the prepared solution to the tank of a suitable thermoelectric fogger unit. Apply the solution at a rate of 20 ML/m3. After use, always thoroughly rinse the equipment with clean water. |
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - United States