LOCTITE® EA 9450 is a fast-curing adhesive with an epoxy resin and mercaptan hardener designed for mixing in structural bonding applications, providing high-strength hold and non-sagging properties. This ultra-clear adhesive is recommended for the bonding and repair of components, providing excellent gap fill and vertical performance.
Resin Properties:
Chemistry: Resin
Appearance: Translucent white paste
Specific Gravity @ 25°C: 1.15 to 1.2
Flow, mm: <10
Viscosity, Brookfield - RVT, 25°C, mPa·s (cP), Spindle 7, speed 2.5 rpm: 150,000 to 750,000
Thixotropic Index: 3.2
Hardener Properties:
Chemistry: Mercaptan
Appearance: Translucent paste
Specific Gravity @ 25°C: 1.09 to 1.16
Flow, ISO 7390, mm: <10
Fixture Time, @ 22°C, minutes: 13
Physical Properties:
Shore Hardness, ISO 868, Durometer D: 70
Glass Transition Temperature, ASTM D 1640, °C: 50
Elongation , ISO 527-3,%: 40
Tensile Strength, ISO 527-3 N/mm² (psi): 17 (2,400)
Tensile Modulus , ISO 527-3 N/mm² (psi): 1,025 (150,000)
Primary Chemistry:
Epoxy
LOCTITE® EA 9450 is a specially formulated structural bonding adhesive featuring a medium viscosity, 2-part formulation with a 1:1 mix ratio by volume, allowing easy mixing and application. It cures quickly at room temperature upon mixing the resin and hardener, providing an excellent adhesive paste that adheres to metals, plastic, ceramics, and glass with an ultra-clear bond line. Its exceptional non-sag properties ensure optimal vertical performance, efficiently filling gaps and bonding components without run-off. LOCTITE® EA 9450 provides excellent fixture after 13 minutes and reaches full cure after 3 to 6 hours.
Resin Properties:
Chemistry: Resin
Appearance: Translucent white paste
Specific Gravity @ 25°C: 1.15 to 1.2
Flow, mm: <10
Viscosity, Brookfield - RVT, 25°C, mPa·s (cP), Spindle 7, speed 2.5 rpm: 150,000 to 750,000
Thixotropic Index: 3.2
Hardener Properties:
Chemistry: Mercaptan
Appearance: Translucent paste
Specific Gravity @ 25°C: 1.09 to 1.16
Flow, ISO 7390, mm: <10
Fixture Time, @ 22°C, minutes: 13
Physical Properties:
Shore Hardness, ISO 868, Durometer D: 70
Glass Transition Temperature, ASTM D 1640, °C: 50
Elongation , ISO 527-3,%: 40
Tensile Strength, ISO 527-3 N/mm² (psi): 17 (2,400)
Tensile Modulus , ISO 527-3 N/mm² (psi): 1,025 (150,000)
Primary Chemistry:
Epoxy
Poor adherence of adhesive to difficult substrates and rough or poorly fitting surfaces, like metals, ceramics, rigid plastics, or glass
Poor aesthetic appearance of bonding line after cure
Gap filling
Vertical applications
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
