LOCTITE® EA 9492 is a two-part bonding compound designed by Henkel for its robust performance properties, including low outgassing and resistance to solvents, chemicals, high temperatures, shock, impacts, and more. It exhibits excellent curing at room temperature upon mixing, achieving optimal fixture after 75 minutes and full cure in 3 days.
Resin properties:
Chemistry: Epoxy
Appearance: White opaque paste
Specific gravity @ 25°C: 1.51
Viscosity, brookfield - RVT, 25 °C, mPa·s (cP), Spindle 6, speed 5 rpm: 50,000 to 120,000
Hardener properties:
Chemistry: Modified amine
Appearance: grey, opaque liquid
Specific gravity @ 25°C: 1.52
Viscosity, brookfield - RVT, 25 °C, mPa·s (cP), Spindle 7, speed 50 rpm: 20,000 to 50,000
Mixed properties:
Appearance: White opaque paste
Pot life @ 22°C, minutes: 15
Fixture Time, mixed, @ 22°C, minutes: 75
Primary Chemistry:
Epoxy
LOCTITE® EA 9492 is an industrial-grade epoxy adhesive formulated to provide excellent durability, chemical resistance, and high-temperature performance up to 180°C. With a 2:1 mix ratio, the epoxy resin and modified amine hardener combine to form a low-viscosity, white opaque paste with low outgassing properties. It is recommended to replace traditional fixing and bonding techniques, enhancing the appearance and providing superior bonding flexibility to a wide variety of materials upon room temperature curing. LOCTITE® EA 9481 achieves fixture in 75 minutes and develops a full cure within 3 days.
Resin properties:
Chemistry: Epoxy
Appearance: White opaque paste
Specific gravity @ 25°C: 1.51
Viscosity, brookfield - RVT, 25 °C, mPa·s (cP), Spindle 6, speed 5 rpm: 50,000 to 120,000
Hardener properties:
Chemistry: Modified amine
Appearance: grey, opaque liquid
Specific gravity @ 25°C: 1.52
Viscosity, brookfield - RVT, 25 °C, mPa·s (cP), Spindle 7, speed 50 rpm: 20,000 to 50,000
Mixed properties:
Appearance: White opaque paste
Pot life @ 22°C, minutes: 15
Fixture Time, mixed, @ 22°C, minutes: 75
Primary Chemistry:
Epoxy
Poor adherence of adhesive to difficult substrates and rough or poorly fitting surfaces
Poor aesthetic appearance of bonding line after cure
Small and quick repairs
Bonding applications
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
