LOCTITE® EA 9492 LI is an advanced version of LOCTITE® EA 9492 epoxy adhesive with an improved safety profile. It provides exceptional temperature resistance and is suitable for use in general-purpose bonding and repairing applications in high-temperature environments.
Resin properties:
Chemistry: Epoxy
Appearance: White, opaque paste
Specific Gravity @ 25°C, g/mL: 1.52 to 1.56
Viscosity, Brookfield - RVT, 25°C, mPa·s (cP) (Spindle 6, 5 rpm): 50,000 to 120,000
Viscosity, DIN 54453, mPa·s (cP): 45,000
Hardener properties:
Chemistry: Modified amine
Appearance: Grey, opaque liquid
Specific gravity @ 25°C, g/mL: 1.5 to 1.58
Viscosity cone plate 4 cm @ 25°C, mPa.s (cP): 20,000 to 45,000
Mixed properties:
Appearance: White opaque paste
Pot life @ 25°C, minutes: 10 to 30
Pot life @ 100°C, minutes: 6
Fixture time @ 22°C, minutes: 75
Shore D hardness: 85
Primary Chemistry:
Epoxy
LOCTITE® EA 9492 LI is a two-component bonding system designed for applications requiring superior temperature and chemical resistance. Its epoxy resin and modified amine hardener should be mixed in a 2:1 ratio, providing high strength, low viscosity epoxy resin recommended for general-purpose applications, including the potting or encapsulation of boxes, parts, and devices. Its bond exhibits resistance to a range of other factors, including mechanical and electrical shock, impact, solvents, and more.
Resin properties:
Chemistry: Epoxy
Appearance: White, opaque paste
Specific Gravity @ 25°C, g/mL: 1.52 to 1.56
Viscosity, Brookfield - RVT, 25°C, mPa·s (cP) (Spindle 6, 5 rpm): 50,000 to 120,000
Viscosity, DIN 54453, mPa·s (cP): 45,000
Hardener properties:
Chemistry: Modified amine
Appearance: Grey, opaque liquid
Specific gravity @ 25°C, g/mL: 1.5 to 1.58
Viscosity cone plate 4 cm @ 25°C, mPa.s (cP): 20,000 to 45,000
Mixed properties:
Appearance: White opaque paste
Pot life @ 25°C, minutes: 10 to 30
Pot life @ 100°C, minutes: 6
Fixture time @ 22°C, minutes: 75
Shore D hardness: 85
Primary Chemistry:
Epoxy
Poor adherence of adhesive to difficult substrates and rough or poorly fitting surfaces
Poor aesthetic appearance of bonding line after cure
Small and quick repairs
Bonding applications
Potting and encapsulation of boxes, parts, and devices
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
