LOCTITE® SF 7455 is a high-quality amine-based adhesive accelerator recommended for the bonding of dissimilar materials (i.e. glass, metals, and ceramics) and close-fitting parts. It is a low-viscosity transparent to slightly hazy liquid with a drying time of 60 seconds.
Appearance: Transparent to slightly hazy liquid
Specific gravity @ 23°C: 0.68
Viscosity @ 25°C, mPa·s (cP): 0.4
Drying time @ 23°C, seconds: 60
On part life, minutes: 5
Fixture Time, ISO 4587, seconds: 10
LOCTITE® SF 7455 is a sulfenamide activator with heptane solvent recommended to expedite the curing process of cyanoacrylate instant adhesives. It is especially effective in the bonding of dissimilar substrates, such as metals, ceramics, and glass, where standard curing might be slower. It can be applied before or after the application of adhesives but is most effective for post-application to ensure rapid fixturing with a drying time of 60 seconds. With its low-viscosity formulation, LOCTITE® SF 7455 can also be easily applied to close-fitting parts ensuring thorough adhesion. LOCTITE® SF 7455 is recommended for a wide range of applications, including tamper-proofing adjustable components, edge guides, securing wires or coils to PCBs, mounting stand-offs, and board stiffeners.
Appearance: Transparent to slightly hazy liquid
Specific gravity @ 23°C: 0.68
Viscosity @ 25°C, mPa·s (cP): 0.4
Drying time @ 23°C, seconds: 60
On part life, minutes: 5
Fixture Time, ISO 4587, seconds: 10
Excessive adhesive outside of bond line
Slow cure of LOCTITE® instant adhesives and other cyanoacrylate adhesives
Securing wires or coils to PCBs
Tamper-proofing adjustable components
Mounting stand offs
Edge guides
Board stiffeners
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
