Overview

With filters by chemistry, function and process, we carry a variety of elastomer products for use in the agricultural industry.

50 Products
1
Tufel™ II 94206 container
Tufel™ II 94206 is a two component platinum cured 20A durometer silicone rubber for extrusion and calendering.
2
Microthene® MN 722-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 3.7
3
Trilene® CP-2000 container
Low viscosity Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and plastics.
4
Trilene® CP-80 container
Trilene® CP-80 is a high-viscosity and low-molecular weight Ethylene Propylene Diene Terpolymer (EPDM) liquid for use in elastomers, lubricants, grease, and oils.
5
Microthene® FA 700-00 container
20 micron high density polyethylene powder with a melt index of 10.
6
Element14™ PDMS 500 container
Element14™ PDMS 500 is a low viscosity, linear polydimethylsiloxane polymer.
7
TraSys® 428 container
Stoner TraSys® 428 is a water-based dispersion that provides the highest slip, durability, and anti-stick capabilities for high-flow injection molding applications like gaskets, O-rings, or seals.
8
Impruvol 20 container
Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.
9
ANOX™ 20 Powder container
ANOX™ 20 Powder is a high molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.
10
Microthene® MN 710-20 container
50 mesh (292 micron) polyethylene powder with a melt index of 22.
11
Silplus™ 30 HS container
Silplus™ 30 HS is a 30A heat cured high strength base silicone elastomer.
12
TraSys® 9825 container
Ideal for compression, transfer and injection molding of rubber compounds (great for polished surfaces)
13
BHT, Free Flow container
Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including free-flowing spherical particles.
14
Trilene FreeFlow® CP-80 container
Free-flowing and high viscosity Ethylene Propylene (EPDM) Copolymer similar to CP-80 but supplied in a powder form.
15
Glacial Acrylic Acid container
Glacial Acrylic Acid, also known as propenoic acid, is a simple carboxylic acid and the basic building block of acrylic polymers used in many applications.
16
Microthene® MN 711-20 container
35 mesh (500 micron) polyethylene powder with a melt index of 22.
17
SUNPROOF™ SUPER container
Antiozonant that prevents static ozone cracking under a wide range of weather conditions.
18
TraSys® 818 container
TraSys® 818 is a fluorochemical mold release coating for hot mold applications. It provides excellent performance with a clean surface and no oil residuals.
19
CELOGEN® 780 container
Chemical blowing agent with a very low decomposition temperature designed for use with silicone gums that does not require the addition of an activator.
20
Microthene® MN 727-00 container
16 mesh (1190 micron) polyethylene powder with a melt index of 24.
Page
Displaying 1 - 20 of 50 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
Janssen PMP ZINC PYRION™ thumbnail
Janssen PMP offers various pyrithione-based antimicrobials under the PYRION™ brand to reduce microbrial growth in various applications. Zinc Pyrion™ can be used as an antimicrobial agent in the plastics industry to safely protect against microorganisms.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.
POLYBOND™ and Recycling of Polyolefins thumbnail

The SI Group portfolio of POLYBOND™ coupling agents improves mechanical performance for recycled filled composites by strengthening the coupling bond.

Dorf Ketal Unilink® 4200 thumbnail
Dorf Ketal's Unilink® catalysts and aromatic chain extenders serve the global polyurethane and polyurea markets. Unilink can be used as effective curing agents for TDI and MDI formulations. Polymers or foam cured with Unilink show improved strength, hardness, adhesion, longer potlife, impact resistance and load bearing properties.