Overview

Explore our comprehensive portfolio of cured fluoropolymer precompounds that are designed for use as base-resins in rubber molding applications

9 Products
1
Viton™ B-435C container
Viton™ B-435C is a precompounded fluoropolymer that is designed for use in applications where improved bonding to metal inserts is required.
2
Viton™ B-651C container
Viton™ B-651C is a precompounded fluoropolymer that offers excellent mold flow, high tear resistance, and improved bonding to metal inserts.
3
Viton™ A-201C container
Viton™ A-201C, formerly called VTR-6402, is a precompounded fluoropolymer that offers a fast cure rate, excellent rheology and mold release in injection molding applications. Viton™ A-201C is designed for the injection molding of sealing devices.
4
Viton™ B-601C container
Viton™ B-601C is a precompounded fluoropolymer that is excellent for use when a balance of compression set and fluid resistance is required. Viton™ B-601C is ideal for simple shapes injection moldings.
5
Viton™ A-601C container
Viton™ A-601C, formerly called VTR-6806, is a high viscosity precompounded fluoropolymer that is designed for compression molding of sealing devices.
6
Viton™ A-401C container
Viton™ A-401C, formerly called VTR-6600, is a precompounded fluoropolymer that provides superior resistance to compression set and improved rheology at high shear rates.
7
Viton™ A-361C container
Viton™ A-361C, formerly called VTR-7152, is a precompounded fluoropolymer with excellent mold flow and tear resistance. Viton™ A-361C is used when good adhesion to metal is required.
8
Viton™ A-331C container
Viton™ A-331C, formerly called VTR-6676, is a precompounded fluoropolymer with excellent mold flow that provides high tear elongation and resistance. Viton™ A-331C is designed for the injection and compression molding of complex shapes that require maximum hot tear.
9
Viton™ F-605C container
Viton™ F-605C is a precompounded fluoropolymer that offers the highest fuel and fluid resistance among all the Viton™ A and B fluoroelastomers.
Page
Displaying 1 - 9 of 9 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
Janssen PMP ZINC PYRION™ thumbnail
Janssen PMP offers various pyrithione-based antimicrobials under the PYRION™ brand to reduce microbrial growth in various applications. Zinc Pyrion™ can be used as an antimicrobial agent in the plastics industry to safely protect against microorganisms.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.
POLYBOND™ and Recycling of Polyolefins thumbnail

The SI Group portfolio of POLYBOND™ coupling agents improves mechanical performance for recycled filled composites by strengthening the coupling bond.

Dorf Ketal Unilink® 4200 thumbnail
Dorf Ketal's Unilink® catalysts and aromatic chain extenders serve the global polyurethane and polyurea markets. Unilink can be used as effective curing agents for TDI and MDI formulations. Polymers or foam cured with Unilink show improved strength, hardness, adhesion, longer potlife, impact resistance and load bearing properties.