Overview

Elastomer products for the building and construction market. Additional filters are available to target the best product for your application.

97 Products
1
Viton™ A-500 Pellets container
Viton™ A-500, formerly called VTR-6517, is a gum fluoropolymer with an intermediate viscosity compared to other A-type gum polymers. Viton™ A-500 is supplied in pellet form and is designed for use with Viton™ curative VC-50.
2
Microthene® MN 722-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 3.7
3
Stoner® A320 Mold Cleaner container
Stoner® A320 All-Purpose Cleaner is a time-saving, concentrated, water-based cleaner for molds. Stoner® A320 quickly cuts through any color and resin build-up in molding applications.
4
Charflam 200-M container
Intumescent flame retardant
5
NAUGARD™ 445 Powder container
NAUGARD™ 445 Powder is an amine antioxidant with excellent synergy with phenolic antioxidants and excellent for use in extreme heat and oxygen environments.
6
NOVAZONE™ AS container
Strong antioxidant and antiozonant for natural and synthetic rubbers.
7
WESTON™ TDP container
Trialkyl phosphite ester antioxidant that functions as a secondary stabilizer in a variety of polymers that do not require food contact.
8
Trilene® CP-2000 container
Low viscosity Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and plastics.
9
Twinkling Star ATO container
Synergist used in conjunction with brominated or Chlorinated compounds to reduce flammability.
10
Viton™ GFLT-200S container
Viton™ GFLT-200S is a low viscosity peroxide-curable fluoroelastomer gum with 67% fluorine content. It offers an excellent combination of low-temperature flexibility and resistance to fluids and oils.
11
Epolene® N-14 Polymer container
Epolene® N-14 is a polyethylene wax that is commonly used as a mold release additive and lubricant in rubber processing.
12
Trilene® CP-80 container
Trilene® CP-80 is a high-viscosity and low-molecular weight Ethylene Propylene Diene Terpolymer (EPDM) liquid for use in elastomers, lubricants, grease, and oils.
13
Viton™ B-202 container
Viton™ B-202 is a low viscosity fluoropolymer gum that can be used in various molding applications and coatings. Viton™ B-202 can be cured with Viton™ VC-30 or Viton™ VC-50.
14
Viton™ A-100 container
Viton™ A-100, formerly called VTR-6698, is a gum fluoropolymer with ultra low viscosity that can be cured with Viton™ VC-50 curative.
15
Microthene® FA 700-00 container
20 micron high density polyethylene powder with a melt index of 10.
16
Viton™ GFLT-600S container
Viton™ GFLT-600S is a medium viscosity peroxide-curable fluoroelastomer gum with 67% fluorine. It offers an excellent combination of low-temperature flexibility and resistance to fluids and oils.
17
Element14™ PDMS 500 container
Element14™ PDMS 500 is a low viscosity, linear polydimethylsiloxane polymer.
18
TraSys® 428 container
Stoner TraSys® 428 is a water-based dispersion that provides the highest slip, durability, and anti-stick capabilities for high-flow injection molding applications like gaskets, O-rings, or seals.
19
Viton™ B Pellets container
Viton™ B Pellets is a high-viscosity fluoropolymer gum that is supplied in pellets form. This product is an excellent choice for compression molding applications and can be cured with Viton™ curative VC-30 or Viton™ curative VC-50.
20
PhosGard® APP-MC container
Melamine coated ammonium polyphosphate
Page
Displaying 1 - 20 of 97 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
Janssen PMP ZINC PYRION™ thumbnail
Janssen PMP offers various pyrithione-based antimicrobials under the PYRION™ brand to reduce microbrial growth in various applications. Zinc Pyrion™ can be used as an antimicrobial agent in the plastics industry to safely protect against microorganisms.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.
POLYBOND™ and Recycling of Polyolefins thumbnail

The SI Group portfolio of POLYBOND™ coupling agents improves mechanical performance for recycled filled composites by strengthening the coupling bond.

Dorf Ketal Unilink® 4200 thumbnail
Dorf Ketal's Unilink® catalysts and aromatic chain extenders serve the global polyurethane and polyurea markets. Unilink can be used as effective curing agents for TDI and MDI formulations. Polymers or foam cured with Unilink show improved strength, hardness, adhesion, longer potlife, impact resistance and load bearing properties.