Overview

With filters by chemistry, function and process here are our elastomer products for use in the consumer industry.

112 Products
1
Tufel™ II 94206 container
Tufel™ II 94206 is a two component platinum cured 20A durometer silicone rubber for extrusion and calendering.
2
Microthene® MN 722-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 3.7
3
NAUGARD™ 445 Powder container
NAUGARD™ 445 Powder is an amine antioxidant with excellent synergy with phenolic antioxidants and excellent for use in extreme heat and oxygen environments.
4
NOVAZONE™ AS container
Strong antioxidant and antiozonant for natural and synthetic rubbers.
5
WESTON™ TDP container
Trialkyl phosphite ester antioxidant that functions as a secondary stabilizer in a variety of polymers that do not require food contact.
6
n-Hexane 99 Pure container
A pure grade, high-purity hydrocarbon ideally used as a carrier fluid for silicone oils and as a solvent for extraction of edible oils from seed and vegetable crops.
7
Trilene® CP-2000 container
Low viscosity Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and plastics.
8
NAUGAWHITE™ Liquid container
Non-staining, non-discoloring liquid form antioxidant that protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure.
9
NAUGARD™ DSTDP container
NAUGARD™ DSTDP is a thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.
10
Epolene® N-14 Polymer container
Epolene® N-14 is a polyethylene wax that is commonly used as a mold release additive and lubricant in rubber processing.
11
Trilene® CP-80 container
Trilene® CP-80 is a high-viscosity and low-molecular weight Ethylene Propylene Diene Terpolymer (EPDM) liquid for use in elastomers, lubricants, grease, and oils.
12
Silopren™ LSR 2050 container
Momentive Silopren™ LSR 2050 properties consist of a two-component 50A general purpose liquid silicone rubber that exhibits excellent thermal stability and cure rates.
13
Microthene® FA 700-00 container
20 micron high density polyethylene powder with a melt index of 10.
14
Pationic® 1042K container
Corbion Pationic® 1042K is a glycerol ester monostearate (GMS) with 42% alpha-monoester content. Pationic® 1042k is a polymer additive that can be used as an internal mold release or for anti-static agent properties. This product is certified Kosher and Halal.
15
Element14™ PDMS 500 container
Element14™ PDMS 500 is a low viscosity, linear polydimethylsiloxane polymer.
16
TraSys® 428 container
Stoner TraSys® 428 is a water-based dispersion that provides the highest slip, durability, and anti-stick capabilities for high-flow injection molding applications like gaskets, O-rings, or seals.
17
Viton™ B Pellets container
Viton™ B Pellets is a high-viscosity fluoropolymer gum that is supplied in pellets form. This product is an excellent choice for compression molding applications and can be cured with Viton™ curative VC-30 or Viton™ curative VC-50.
18
Impruvol 20 container
Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.
19
Zinc PYRION™ Powder container
Powdered zinc pyrithione preservative (CAS: 13463-41-7) that provides antimicrobial protection in a wide variety of industrial applications.
20
ANOX™ 20 Powder container
ANOX™ 20 Powder is a high molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.
Page
Displaying 1 - 20 of 112 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
Janssen PMP ZINC PYRION™ thumbnail
Janssen PMP offers various pyrithione-based antimicrobials under the PYRION™ brand to reduce microbrial growth in various applications. Zinc Pyrion™ can be used as an antimicrobial agent in the plastics industry to safely protect against microorganisms.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.
POLYBOND™ and Recycling of Polyolefins thumbnail

The SI Group portfolio of POLYBOND™ coupling agents improves mechanical performance for recycled filled composites by strengthening the coupling bond.

Dorf Ketal Unilink® 4200 thumbnail
Dorf Ketal's Unilink® catalysts and aromatic chain extenders serve the global polyurethane and polyurea markets. Unilink can be used as effective curing agents for TDI and MDI formulations. Polymers or foam cured with Unilink show improved strength, hardness, adhesion, longer potlife, impact resistance and load bearing properties.