There are no products found that meet this criteria.

• 

  ANOX™ 20 Granular

  High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging. Similar to ANOX™ 20 Powder, but in granular form.

  ANOX™ 20 Granular is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX™ 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 570 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 1102.3lb Supersac, 1102.3lb Supersac, 44.09lb Bag

• 

  ANOX™ 20 Powder

  High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.

  ANOX™ 20 Powder is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX™ 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 650 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 1102.3lb Supersac, 44.09lb Bag

• 

  Benzoflex™ Dipropylene Glycol Dibenzonate

  Non-phthalate plasticizer for cast urethane.

  Benzoflex™ 9-88SG is a non-phthalate plasticizer for use with cast urethanes. The SG is a "special grade" with a maximum hydroxyl number specification designed for use in urethane prepolymers. 9-88SG offers minimum cure interference and is compatible with both ethers and esters. Acidity (wt%): 0.1 max. Color Pt-Co: 40-80 Refractive index @ 25°C: 1.52 Specific gravity @ 20°C/20°C: 1.12 Hydroxyl number: 6 max. Boiling point: 657°F (347°C) Flash point (setaflash closed cup): 360°F (182°C) Freezing point: -22°F (-30°C) Vapor pressure @ 20°C: <0.00001 torr (<0.0013 Pa) Viscosity @ 25°C: 105 cP (105 mPa·s) Wt/Vol @ 20°C: 9.35 lb/gal (1.12 kg/L) Good compatibility Stable physical properties Non-phthalate Urethane prepolymers Urethane adhesives Urethane sealants

  Manufacturer: Eastman | Product Line: Benzoflex™ Benzoate Ester Plasticizers | Package Sizes: 45lb Pail, 500lb Drum

• 

  BLE™ 75

  Solid form antioxidant and antiflex cracking agent for use in peroxide cured solid rubbers and latex.

  BLE™ 75 stabilizer is a solid form antioxidant and antiflex cracking agent designed for Neoprene, nitrile rubbers, BR, EPDM, SBR and SBR lattices. This stabilizer can be dispersed and added to latex, or added directly to solid rubber. BLE™ 75 is non-blooming and has negligible effect on cure rate even when used with peroxide curing systems. Appearance: Dark brown to black powder (75% active) Specific Gravity: 1.33 Insoluble: Common solvents Approved for food contact in rubber articles intended for repeated use (6% loading max) Can be used in peroxide curing systems Can add directly to solid rubber Can be added in dispersion form to latex Non-blooming Negligible effect on cure rate Solid form allows for easy handling and dosing Tire tread, breaker, chafer, rim flange and carcass compounds

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 1lb Jar, 55.11lb Box

• 

  Element 14PDMS 50

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 50 is a linear polydimethylsiloxane with a viscosity of 50 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity = 50 cSt Appearance = Clear colorless liquid Specific gravity at 20C = 0.96 Refractive Index at 29C = 1.4 Flash Point = >300C Pour Point = -54C High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS 5-A

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 5-A is a linear polydimethylsiloxane with a viscosity of 5 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity, mPa•s (cps): 5 Appearance: Clear, colorless liquid Flash point, closed cup, °C: >=121 Specific gravity (@ 25°C): 0.912-0.920 Refractive index (@ 25°C): 1.3950-1.3990 Pour point, °C: ~-100 Surface tension, dynes/cm (@25°C): 19.7 Thermal conductivity, W•m-1•K-1: 0.116 Coefficient of expansion, 10-3/°C: 1.08 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 396.83lb Drum

• 

  Element 14PDMS1000

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 5-A is a linear polydimethylsiloxane with a viscosity of 1000 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 1000 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.3 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS350

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 350 is a linear polydimethylsiloxane with a viscosity of 350 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 350 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.1 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS500

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 500 is a linear polydimethylsiloxane with a viscosity of 500 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 500 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.1 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Epolene® C-10 Polymer

  Epolene® C-10 is a low density polyethylene homopolymer with medium molecular weight and low color for use in adhesives, coatings and polymer compounding.

  Epolene® C-10 is a branched LDPE polymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 35,000. Polymer Type: LDPE Molecular Weight: 35,000 Mettler Softening Point: 101°C (ASTM D6090) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 18,600 cP @ 125°C 3,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat stability Hot melt adhesives, packaging, automotive coatings, wax modification, building & construction coatings, solvent-based adhesives

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Epolene® N-11 Polymer

  Epolene® N-11 is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

  Epolene® N-11 is a low density polyethylene product that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 5,000 and is available in pellet form. Epolene® N-11 provides improved dispersion in single and twin screw extruders. Polymer Type: LDPE Molecular Weight: 5,000 Ring and Ball Softening Point: 107°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 350 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Graphic arts, wax modification, inks, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  FLEXAMINE™

  Stabilizer that protects natural and synthetic rubbers from deterioration initiated by copper or manganese, as well as heat, flexing fatigue, and oxygen.

  FLEXAMINE™ stabilizer is a super aging antioxidant that protects natural and synthetic rubbers from deterioration caused by oxygen, flexing fatigue, and heat. Provides long term heat aging protection for black filled polyamides that come into contact with gasoline or oil. FLEXAMINE™ also protects against deterioration initiated by contact with copper or manganese. Appearance: Brown to dark brown granules Specific Gravity: 1.17 g/cm³ Melting Point: 87 °C Solubility: Acetone, Benzene, Ethylene Dichloride Insolubility: Water, Gasoline Protects against deterioration caused by oxygen, heat, and flexing fatigue Food contact approvals Protects against copper or manganese initiated deterioration Black-filled polyamides in contact with gasoline or oil, heavy service truck treads and carcass compounds, natural rubber wire insulation, linesmens' electrical insulating blankets, gloves and other products that come into contact with copper and manganese

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Box

• 

  LOWINOX™ AH25

  Sterically hindered phenolic antioxidant designed for use in unvulcanized rubber, giving excellent protection from oxygen and UV exposure.

  LOWINOX™ AH25 is a sterically hindered phenolic antioxidant that provides excellent protection for unvulcanized rubber adhesives, tapes, and films from oxygen and UV initiated cracking. It prevents tack loss and reduces cold flow of unvulcanized rubber. LOWINOX™ AH25 is a very effective stabilizer and anti-skinning agent for a variety of coatings, and provides scorch protection in wire and cable applications. Appearance: White to cream colored powder Molecular Weight: 250 g/mol Melting Point: 179 °C Bulk Density: 290 kg/m³ Volatility (2g/2h/80 °C): 0.5% max Ash Content (5g/800 °C): 0.1% max Food contact approvals Good scorch resistance for wire and cable Anti-skinning agent for coatings Excellent protection from oxygen and UV exposure Prevents tack loss Reduces cold flow Unvulcanized rubber adhesives, tapes, and films; wire and cable applications, coatings

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 44.09lb Bag

• 

  LOWINOX™ TBM6

  Versatile phenolic antioxidant that is especially well suited for wire and cable applications, providing heat stability during processing and end use.

  LOWINOX™ TBM6 is a versatile hindered thiophenol antioxidant that is especially well suited for medium, high, and extra high voltage wire and cable applications. It also synergizes well with carbon black, acts as an anti-skinning agent in hot melt adhesives, provides heat stability in lubricants, and antiscorch protection for polyurethanes during condensation of TDI on polyesters. LOWINOX™ TBM6 has excellent compatibility with peroxides and is highly resistant to thermo-oxidative degradation and washout. Appearance: White crystalline powder Molecular Weight: 358 g/mol Particle Size Distribution: 180-200 microns Assay: 98% minimum Melting Point: 160-164 °C Volatiles: 0.1% max Ash Content: 0.05% max Iron Content: 5 ppm Color APHA: Guaranteed 50 max Excellent long-term heat stability Non-staining Non-discoloring Food contact approvals Synergistic with carbon black Compatible with peroxides Antiscorch protection for polyurethanes Heat stability in lubricants Anti-skinning agent in hot melt adhesives Food packaging, HDPE and LDPE tubes, water and gas pipes, connectors, high voltage cables, greenhouse films

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.115lb Bag

• 

  Microthene® FA 700-00

  20 micron high density polyethylene powder with a melt index of 10.

  Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FA 709-00

  20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

  Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FE 532-00

  20 micron Ethylene Vinyl Acetate (EVA) powder with a melt index of 10.

  Microthene FE 532-00 is a 20 micron EVA powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Equivalent melt index: 8.0 g/10 min Density: 0.926 g/cc Vicat softening point: 75.0°C/167.0°F Peak melting point: 96.0°C/204.8°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 MPa/psi Elongation @ break: 675% Flexural modulus: 93.1/13,500 MPa/psi Hardness, Shore D: 38 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FN 501-00

  20 micron low density polyethylene powder with a melt index of 23.

  Microthene FN 501-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 501-00 has the highest melt index of all the Microthene grades. Melt index: 23 g/10 min Density: 0.9245 g/cc Vicat softening point: 92.0°C/197.6°F Peak melting point: 114.5°C/238.1°F Low temperature brittleness: -50.0°C/-58.0°F Tensile strength @ break: 13.1/1,900 MPa/psi Elongation @ break: 120% Flexural modulus: 310.3/45,000 MPa/psi Hardness, Shore D: 54 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® FN 510-00

  20 micron low density polyethylene powder with a melt index of 5.

  Microthene FN 510-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.923 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FN 519-00

  20 micron low density polyethylene powder with a melt index of 5.Flow enhanced version of Microthene FN 510.

  Microthene FN 519-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FN 519-00 is a flow enhanced version of FN 510-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.9225 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 701-00

  35 mesh (500 micron) polyethylene powder with a melt index of 70.

  Microthene MN 701-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/Matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 710-20

  50 mesh (292 micron) polyethylene powder with a melt index of 22.

  Microthene MN 710-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 711-20

  35 mesh (500 micron) polyethylene powder with a melt index of 22.

  Microthene MN 711-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 714-00

  50 mesh (292 micron) polyethylene powder with a melt index of 70.

  Microthene MN 714-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 722-00

  50 mesh (292 micron) polyethylene powder with a melt index of 3.7

  Microthene MN 722-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 3.7 g/10 min Density: 0.923 g/cc Vicat softening point: 94.6°C/202.3°F Peak melting point: 109.0°C/228.2°F Low temperature brittleness: -68.1°C/-90.6°F Tensile strength @ break: 11.8/1,720 MPa/psi Elongation @ break: 610% Flexural modulus: 330/47,800 MPa/psi Hardness, Shore D: 56/50 max/15 sec Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 727-00

  16 mesh (1190 micron) polyethylene powder with a melt index of 24.

  Microthene MN 727-00 is a 16 mesh (1190 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 25 g/10 min Density: 0.924 g/cc Vicat softening point: 86.4°C/187.5°F Peak melting point: 109.6°C/229.3°F Low temperature brittleness: -28.3°C/-18.9°F Tensile strength @ break: 8.4/1,220 MPa/psi Elongation @ break: 110% Flexural modulus: 342/49,600 MPa/psi Hardness, Shore D: 56/49 max/15 sec Particle shape: Irregular Average particle size: 16 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  NAUGARD™ Q Drop

  Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers.

  NAUGARD™ Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black such as tire carcasses and belts. Appearance: Amber drop Molecular Weight: 874 g/mol Specific Gravity (@ 25 °C): 1.06 Melting Point: 120-125 °C Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Bag

• 

  NAUGARD™ Super Q

  Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers. Higher purity version of NAUGARD® Q.

  NAUGARD™ Super Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black for specialty applications such as geomembranes and wire and cable compounds. Appearance: Amber to brown pastille Specific Gravity (@25 °C): 1.08 Color - Gardner: 11 Softening Point: 115-135 °C Flash Point (Open Cup): 274-282 °C Molecular Weight: 874 g/mol Soluble (@ 25 °C): Acetone, chloroform, ethanol, naphtha, toluene Insoluble (@ 25 °C): Water, petroleum ether Higher purity than NAUGARD™ Q Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Box

• 

  NAUGAWHITE™ Liquid

  Non-staining, non-discoloring liquid form antioxidant that protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure.

  NAUGAWHITE™ Liquid is a rubber antioxidant that is easily emulsifiable for latex applications and will not stain fabrics, lacquers or other materials through migration or contact. It protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure. NAUGAWHITE™ Liquid will not yellow when exposed to nitrogen dioxide. Appearance: Clear amber viscous liquid Specific Gravity: 0.96 Soluble: Most organic solvents Insoluble: Water Non-staining Non-discoloring Food contact approvals Does not yellow when exposed to nitrogen dioxide Latex foam, refrigerator gaskets, footwear, proofing, sundries, wire insulation such as SP-1 cord, automotive rubber and cloth backing compounds

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 418.87lb Drum

• 

  NAUGAWHITE™ Powder

  Non-staining, non-discoloring powder form antioxidant that protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure.

  NAUGAWHITE™ Powder is a rubber antioxidant suitable for natural and synthetic rubber, that protects against degradation due to heat, light, and oxygen exposure. It will not stain fabrics, lacquers or other materials through migration or contact. NAUGAWHITE™ Powder will not yellow when exposed to nitrogen dioxide. Appearance: Tan powder, 70% active on an inert base carrier Specific Gravity: 1.19 Soluble: Most organic solvents Insoluble: Water Non-staining Non-discoloring Food contact approvals Does not yellow when exposed to nitrogen dioxide Latex foam, refrigerator gaskets, footwear, proofing, sundries, wire insulation such as SP-1 cord, automotive rubber and cloth backing compounds

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.11lb Carton

• 

  OCTAMINE™ Drop

  Solid amine antioxidant that offers excellent protection with minimal discoloration, to be used with sulfur-cure systems in EPDM, nitrile, and neoprene rubbers.

  OCTAMINE™ Drop is an octylated diphenylamine primary antioxidant, offering excellent protection against degradation as a result of flexing and exposure to heat and oxygen. Designed to be used with sulfur-cure systems, OCTAMINE™ Drop is non-blooming both before and after cure, and causes minimal discoloration. Appearance: Light brown pastille Specific Gravity: 0.99 Melting Point: 82-98 °C Soluble: Acetone, gasoline, toluene Insoluble: Water Neglible effect on cure rate Improves protection from bin sorch in neoprene Non-blooming before and after cure Excellent protection from degradation as a result of oxygen, heat, and flexing Very slight discoloring Very slight staining Food contact approvals Tire carcass, molded heels and soles, proofing, sponges, automotive rubber, wire jackets, insulation and floor tile

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 44.09lb Bag, 44.09lb Bag, 55.115lb Bag

• 

  TraSys® 3218

  TraSys® 3218 is an ideal mold release for paper rolls, plastic film rolls and guides & epoxy plastic-wood laminating operations. It is a dry release that does not interfere with post-finishing operations.

  Appearance: translucent liquid Odor: alcohol-like Boiling Point: 82 Volatile: 91-96% Density: 0.800g/cm3

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems

• 

  TraSys® 428

  Highest slip, good for "high-flow" injection molding (o-rings & seals).

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing point (Celsius): 0 Boiling point (Celsius): 100 Volatile: 80-90% Great for molding of organic rubber compounds in high temperatures This product already comes diluted so it is very easy to use

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 55gl Drum, 5gl Drum

• 

  Trilene FreeFlow® 65

  Dry free flowing powder form of Ethylene Propylene (EPDM) terpolymer with 10% diene content.

  Trilene FreeFlow® 65 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. It is used as an additive in rubber compounds to reduce viscosity. It also acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. The low molecular weight of Trilene Freeflow®65 offers significant processing advantages in compounds with a high loading of fillers. Trilene Freeflow® 65 is supplied in a powder form, allowing for easier handling. Ethylene/Propylene: 50/50 Silica content: 32% Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 47,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 39.6828lb Carton, 50lb Carton

• 

  Trilene FreeFlow® 67

  Dry free flowing powder form of Ethylene Propylene (EPDM) terpolymer with 7.7 % diene content.

  Trilene FreeFlow® 67 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. It is used as an additive in rubber compounds to reduce viscosity. It also acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. The low molecular weight of Trilene Freeflow® 67 offers significant processing advantages in compounds with a high loading of fillers. Trilene Freeflow® 67 is supplied in a powder form, allowing for easier handling. Ethylene/Propylene: 46/54 Silica content: 32% Degree of Unsaturation (% Diene): 7.7% Type of Diene: ENB Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 39,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses in Aerospace and Automotive industry Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene FreeFlow® CP-1100

  Dry free flowing powder form of Ethylene Propylene (EPDM) Copolymer.

  Trilene FreeFlow® CP-1100 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. Trilene FreeFlow® CP-1100 offers the same advantages of Trilene® CP-1100, such as FDA approval and being a non-blooming plasticizer, with the added of benefit of being easier to handle since it is supplied as a dry powder. Trilene FreeFlow® CP-1100 offers significant processing advantages in compounds with a high loading of fillers. Ethylene/Propylene: 43/57 Silica content: 32% Color: White to light tan Specific Gravity: 1.04 Molecular Weight by GPC (Da): 12,000 Brookfield Viscosity (cP, RVT #7 at 40°C: 22,500 Brookfield Viscosity (cP, RVT #7 at 100°C: 1,100 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene FreeFlow® CP-80

  Dry free flowing powder form of Ethylene Propylene (EPDM) Copolymer.

  Trilene FreeFlow® CP-80 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. Trilene FreeFlow® CP-80 offers the same advantages of Trilene® CP-80, such as FDA approval and being a non-blooming plasticizer, with the added of benefit of being easier to handle since it is supplied as a dry powder. Trilene FreeFlow® CP-80 offers significant processing advantages in compounds with a high loading of fillers. Ethylene/Propylene: 41/59 Silica content: 32% Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 23,000 Brookfield Viscosity (cP, RVT #7 at 60°: 500,000 Brookfield Viscosity (cP, RVT #7 at 100°: 76,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene® 65

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.

  Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case

• 

  Trilene® 67

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 9.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 67 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 67 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 67 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 46/54 Degree of Unsaturation (% Diene): 9.5% Type of Diene: ENB Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 39,000 Brookfield Viscosity (cP, RVT #7 at 60°: 900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 128,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case, 50lb Carton

• 

  Trilene® 77

  Low molecular weight Ethylene Propylene (EPDM) terpolymer with 10.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 77 is a crystalline waxy EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 77 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 77 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Trilene® 77 is easier to handle during mixing compared to Trilene® 65 and 67 since it is a solid at room temperature. Ethylene/Propylene: 74/26 Degree of Unsaturation (% Diene): 10.5% Type of Diene: ENB Color: Pale Yellow, Waxy solid Specific Gravity: 0.86 Molecular Weight by GPC (Da): 27,000 Brookfield Viscosity (cP, RVT #7 at 60°: 800,000 Brookfield Viscosity (cP, RVT #7 at 100°: 102,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process East to weigh before mixing Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene® CP-1100

  Low molecular weight Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and lubricants.

  Trilene® CP-1100 is an Ethylene-Propylene liquid Copolymer that is used as a plasticizer in rubber compounds. Unlike the Trilene® terpolymers, Trilene® CP-1100 it does not crosslink with the resin but can still offer the benefit of a non-blooming plasticizer without degrading the mechanical properties of the compound. It is less viscous compared to the terpolymers and can be used in applications and can be used in applications that need FDA approval. Trilene® CP-1100 can also be used in lubricants as a thickener providing good shear properties and low temperature flexibility. Ethylene/Propylene: 43/57 Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 6,400 Brookfield Viscosity (cP, RVT #7 at 60°: 19,000 Brookfield Viscosity (cP, RVT #7 at 100°: 1,000 Volatiles at 100ºC (212ºF): <0.5% Easier to process compared to the terpolymers Non extractable Maintains mechanical properties Non-volatile FDA approved Thermal and oxidative stability Improved ageing properties Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Lubricants

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum

• 

  Trilene® CP-80

  Low molecular weight Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and lubricants.

  Trilene® CP-80 is an Ethylene -Propylene liquid Copolymer that is used as a plasticizer in rubber compounds. Unlike the Trilene® terpolymers, CP-80 does not crosslink with the resin but can still offer the benefit of a non-blooming plasticizer without degrading the mechanical properties of the compound. It is less viscous compared to the terpolymers and can be used in applications that need FDA approval. Trilene® CP-80 can also be used in lubricants as a thickener providing good shear properties and low temperature flexibility. Ethylene/Propylene: 41/59 Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 23,000 Brookfield Viscosity (cP, RVT #7 at 60°: 500,000 Brookfield Viscosity (cP, RVT #7 at 100°: 76,000 Volatiles at 100ºC (212ºF): <0.5% Easier to process compared to the terpolymers Non extractable Maintains mechanical properties Non-volatile FDA approved Thermal and oxidative stability Improved ageing properties Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Lubricants

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 136.079kg Drum, 300lb Drum, 44lb Case