There are no products found that meet this criteria.

• 

  BHT

  Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including crystalline.

  Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 100lb Drum, 50lb Bag

• 

  BHT, Free Flow

  Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including free-flowing spherical particles.

  Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 100lb Drum, 50lb Bag

• 

  CELOGEN® 760A

  Self nucleating chemical blowing agent for thermoplastics and rubber that prevents cyanuric acid plate-out forming deposits on dies, molds, and screws.

  CELOGEN® 760A is a self-nucleating chemical blowing agent designed for thermoplastics and rubber. It prevents the formation of cyanuric acid deposits on dies, molds and screws. CELOGEN® 760A has a very small particle size and a high decomposition temperature. Form: Light yellow free flowing powder Particle size: 4 μm Specific gravity: 2.06 Decomposition point: 200-205°C (394-401°F) Gas yield: 160 ml/g (polymer dependent) Prevents cyanuric acid plate-out deposits on screws, dies, and mold surfaces Self nucleating Food contact approvals

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 33.06lb Box

• 

  CELOGEN® 780

  Chemical blowing agent with a very low decomposition temperature designed for use with silicone gums that does not require the addition of an activator.

  CELOGEN® 780 is a chemical blowing agent with a very low decomposition temperature designed for compression molded and extruded silicone gums. It contains a very effective activation system; adding strong activators such as zinc oxide, zinc stearate or ACTICELL® U is unnecessary unless lowering the decomposition temperature is desired. Form: Yellow-orange powder Specific gravity @ 25°C: 1.78 Decomposition point: 142-154°C (288-309°F) Gas yield: 190 ml/g Decomposition gases: N₂, CO₂, CO, NH₃ Soluble: Alkaline solutions Insoluble: Most organic solvents, water Very low decomposition temperature Non-discoloring Decomposition residue is white Contains a very effective activation system Silicone gums, sponge rubber, expanded plastic, extruded profiles and tube applications

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Box

• 

  CELOGEN® OB

  Outstanding chemical foaming agent with a relatively low decomposition temperature for producing cellular rubber and expanded plastic.

  CELOGEN® OB is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively low decomposition temperature and small particle size. CELOGEN® OB is treated with a small amount of Calcium Stearate to enhance flow ability. CELOGEN® OB can be catalyzed by a variety of chemicals. Very strong activators include ACTICELL® U, triethanolamine, and peroxides. Calcium oxide, calcium stearate, stearic acid, cadmium and lead type vinyl stabilizers are all moderate activators. Adipic acid, benzoic acid, salicylic acid, citric acid, lead stearate and zinc stearate are examples of weak activators. Molecular Weight: 358 Gas Content: Mostly nitrogen Appearance: White powder Purity: 93.0% min Average Particle Size: 5-7 µm Moisture Content: 0.5% max Decomposition Point.: 158~164°C Gas Yield: 125~140 ml/g @ S.T.P. pH: 6-8 Soluble: Dimethyl sulfoxide and dimethylformamide Insoluble: Benzene, water Non-staining Non-discoloring Non-toxic Odorless Evolves ammonia-free gas Does not effect cure rate of rubber Does not effect PVC stability Phenolic resins, thermoplastic rubber, Epoxy, NBR-PVC blends for cellular cable insulation

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.115lb Carton

• 

  CELOGEN® OT

  Outstanding chemical foaming agent with a relatively low decomposition temperature for producing cellular rubber and expanded plastic. Similar to CELOGEN® OB, but it has been oil treated to reduce dusting.

  CELOGEN® OT is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively low decomposition temperature and small particle size. CELOGEN® OT can be catalyzed by a variety of chemicals. Very strong activators include ACTICELL® U, triethanolamine, and peroxides. Calcium oxide, calcium stearate, stearic acid, cadmium and lead type vinyl stabilizers are all moderate activators. Adipic acid, benzoic acid, salicylic acid, citric acid, lead stearate and zinc stearate are examples of weak activators. Molecular Weight: 358 Gas Content: Mostly nitrogen Appearance: White powder Purity: 93.0% min Average Particle Size: 5-15 µm Heat Loss: 0.5% max Decomposition Point: 158-164 °C Gas Yield: 125-140 ml/g @ S.T.P. pH: 6-8 Soluble: Dimethyl sulfoxide and dimethylformamide Insoluble: Benzene and water Non-staining Non-discoloring Non-toxic Odorless Evolves ammonia-free gas Does not effect cure rate of rubber Does not effect PVC stability Low dusting Phenolic resins, thermoplastic rubber, NBR-PVC blends for cellular cable insulation

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Carton

• 

  Element 14PDMS 50

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 50 is a linear polydimethylsiloxane with a viscosity of 50 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity = 50 cSt Appearance = Clear colorless liquid Specific gravity at 20C = 0.96 Refractive Index at 29C = 1.4 Flash Point = >300C Pour Point = -54C High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS 5-A

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 5-A is a linear polydimethylsiloxane with a viscosity of 5 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity, mPa•s (cps): 5 Appearance: Clear, colorless liquid Flash point, closed cup, °C: >=121 Specific gravity (@ 25°C): 0.912-0.920 Refractive index (@ 25°C): 1.3950-1.3990 Pour point, °C: ~-100 Surface tension, dynes/cm (@25°C): 19.7 Thermal conductivity, W•m-1•K-1: 0.116 Coefficient of expansion, 10-3/°C: 1.08 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 396.83lb Drum

• 

  Element 14PDMS1000

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 5-A is a linear polydimethylsiloxane with a viscosity of 1000 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 1000 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.3 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS350

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 350 is a linear polydimethylsiloxane with a viscosity of 350 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 350 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.1 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Element 14PDMS500

  Low viscosity, linear polydimethylsiloxane polymer.

  Element 14PDMS 500 is a linear polydimethylsiloxane with a viscosity of 500 centipoise (cps). Element14 PDMS fluids can stay in liquid form over a wide range of temperatures and pressures. As a result they are used in applications that require fluid properties in harsh environments. In mechanically demanding applications they provide excellent shear stability and good lubrication or slip. Viscosity cSt: 500 Appearance: Clear, colorless liquid Specific gravity at 25°C: 0.97 Refractive index at 25°C: 1.4 Flash point, open cup, °C: >302 Pour point, °C: -47 Surface tension dynes/cm at 25°C: 21.1 High and low temperature stability Oxidative stability Chemically inert Low flammability Low surface tension Shear stability High compressibility Low vapor pressure Low odor Soft, smooth silky feel Spreadability Low coefficient of friction Lubricious Heat and mechanical transfer fluids Hydraulic fluids Electrical insulating fluid Water repellent Polish ingredient Mold release agent Lubricant Anti-foam Personal care ingredient Textile spin finishes Paints and coatings additive

  Manufacturer: Momentive | Product Line: Momentive Core Silicone Elastomers | Package Sizes: 440.92lb Drum

• 

  Epolene® C-10 Polymer

  Epolene® C-10 is a low density polyethylene homopolymer with medium molecular weight and low color for use in adhesives, coatings and polymer compounding.

  Epolene® C-10 is a branched LDPE polymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 35,000. Polymer Type: LDPE Molecular Weight: 35,000 Mettler Softening Point: 101°C (ASTM D6090) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 18,600 cP @ 125°C 3,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat stability Hot melt adhesives, packaging, automotive coatings, wax modification, building & construction coatings, solvent-based adhesives

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Epolene® N-11 Polymer

  Epolene® N-11 is a medium molecular weight polyethylene product used in adhesives, wax blends and inks.

  Epolene® N-11 is a low density polyethylene product that is easily blended with waxes to improve strength and improve the gloss of paper coatings. It has a molecular weight of 5,000 and is available in pellet form. Epolene® N-11 provides improved dispersion in single and twin screw extruders. Polymer Type: LDPE Molecular Weight: 5,000 Ring and Ball Softening Point: 107°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: 350 cP @ 125°C Excellent pigment dispersion Scuff resistance Enhances natural and synthetic wax blends Reduces rub resistance High gloss Graphic arts, wax modification, inks, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 50lb Bag

• 

  Epolene® N-14 Polymer

  Polyethylene polymer with a viscosity of 150 cP that is easily blended with natural or synthetic waxes to enhance properties

  Epolene® N-14 aids in pigment dispersion, mold release applications and improves the gloss of paper and coatings. Polymer Type: PE Mettler Softening Point: 108C Penetration Hardness: 3 dmm Viscosity, Brookfield @125C ( 257F): 150 cP Molecular Weight: 4000 Pigment dispersion aid Easy blend with natural and synthetic waxes Low density polyethylene Increases scuff and rub resistance in inks Improved physical properties in paper coatings Hot melt adhesives, solvent based adhesives, wax modification, inks, building and construction, packaging

  Manufacturer: Westlake | Product Line: Epolene® Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHANOX™ 330 Granular

  High molecular weight phenolic antioxidant ideal for a wide variety of applications including elastomers, PE wire insulation, hot melt adhesives, tackifiers and engineering polymers. Similar to ETHANOX™ 330 Powder, but in a granular form.

  ETHANOX™ 330 exhibits superior performance over typical high molecular weight antioxidants in controlling degradation in polyolefins during processing. It is compatible with a wide variety of resins and most polymer additives. ETHANOX™ 330 is stable at high temperatures, and is electrically neutral, making it a particularly effective antioxidant for PE wire insulation. Antioxidants such as AO 1010 and 1076 contain ester linkages which hydrolyze easily. ETHANOX™ 330 does not have these linkages resulting in superior hydrolysis resistance. This is particularly important in applications that have water exposure including piping and wire & cable. ETHANOX™ 300 is also non-migratory. It is the only high molecular weight phenolic antioxidant approved by the FDA for indirect food contact use in all polymers. Appearance: White crystalline powder Melting Point: 244 °C Molecular Weight: 775 g/mol Bulk Density: 630 kg/m³ Broad food-contact approvals Resistant to water and solvent extraction Decreases water carry-over in water-quenched PP films Not absorbed by the fillers commonly used in polyolefins Low volatility Biologically inert Non-staining and non-discoloring Electrically neutral Non-migrating Domestic manufacturing LDPE and HDPE wire insulation, hot melt adhesives, HDPE and MDPE piping

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants

• 

  ETHANOX™ 330 Powder

  High molecular weight phenolic antioxidant ideal for a wide variety of applications including elastomers, PE wire insulation, hot melt adhesives, tackifiers and engineering polymers. Similar to ETHANOX™ 330 Granular, but in a powder form.

  ETHANOX™ 330 exhibits superior performance over typical high molecular weight antioxidants in controlling degradation in polyolefins during processing. It is compatible with a wide variety of resins and most polymer additives. ETHANOX™ 330 is stable at high temperatures, and is electrically neutral, making it a particularly effective antioxidant for PE wire insulation. Antioxidants with ester linkages (ie. AO 1010 and 1076) hydrolyze easily. ETHANOX™ 330 does not have these linkages resulting in superior hydrolysis resistance. This is particularly valuable in applications such as piping or wire & cable when exposed to water. As a non-migratory antioxidant, ETHANOX™ 300 is the only high molecular weight phenolic antioxidant approved by the FDA for indirect food contact use in all polymers. Appearance: White crystalline powder Melting Point: 244 °C Molecular Weight: 775 g/mol Bulk Density: 630 kg/m³ Broad food-contact approvals Resistant to water and solvent extraction Decreases water carry-over in water-quenched PP films Not absorbed by the fillers commonly used in polyolefins Low volatility Biologically inert Non-staining and non-discoloring Electrically neutral Non-migrating Domestic manufacturing LDPE and HDPE wire insulation, hot melt adhesives, HDPE and MDPE piping

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants

• 

  Fluoroguard™ PCA Oil

  Perfluoropolyether (PFPE) polymer compounding additive with excellent color and UV/thermal stability.

  Used to internally lubricates parts, offering excellent lubricity while not affecting chemical properties and allowing moving parts to turn easier and last longer. Average MW: 4800 Volatility: <1% Viscosity (cSt at 50 °C): 101 Density (g/ml at 23 °C): 1.9 Surface Tension (dyn/cm at 26 °C): 18 Refractive Index (nD25): 1.3 Pour Point: -36 °C Appearance: Clear liquid Improves processing of polymers Colorless Odorless Chemically inert Color, UV, and thermal stability Increases wear resistance Increases flex fatigue resistance Improves product gloss Improves surface lubricity Reduces coefficient of friction Reduces squeak/noise Only used at 0.1-1.0%

  Manufacturer: Chemours | Product Line: Fluoroguard™ Polymer Additives | Package Sizes: 0.5kg Bottle, 1kg Bottle, 20kg Drum, 5kg Bottle

• 

  Fluoroguard™ SG Oil

  Perfluoropolyether (PFPE) based USP Plastics Class VI Grade compounding additive with excellent color and UV/thermal stability.

  Used to internally lubricates parts, offering excellent lubricity while not affecting chemical properties and allowing moving parts to turn easier and last longer. Fluoroguard™ SG Oil is designed for medical grade plastics and elastomers. Average MW: 4950 Volatility: <1% Viscosity (cSt at 50 °C): 107 Density (g/ml at 23 °C): 1.9 Surface Tension (dyn/cm at 26 °C): 18 Refractive Index (nD25): 1.3 Pour Point: -36 °C Appearance: Clear Liquid NAMSA tested for USP Plastics Class VI requirement for polymer additives Improves processing of polymers by internally lubricating plastics and elastomers Colorless Odorless Chemically inert Color, UV, and thermal stability Increases wear resistance Increases flex fatigue resistance Improves product gloss Improves surface lubricity Reduces coefficient of friction Reduces squeak/noise Only used at 0.1-1.0% NSF H1 approved fo incidental food contact

  Manufacturer: Chemours | Product Line: Fluoroguard™ Polymer Additives | Package Sizes: 1kg Bottle, 20kg Pail

• 

  Impruvol 20

  Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.

  Sasol's Impruvol 20 is a molten form of Butylated Hydroxy Toluene (BHT), a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 390lb Drum

• 

  Microthene® FA 709-00

  20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

  Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FN 501-00

  20 micron low density polyethylene powder with a melt index of 23.

  Microthene FN 501-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 501-00 has the highest melt index of all the Microthene grades. Melt index: 23 g/10 min Density: 0.9245 g/cc Vicat softening point: 92.0°C/197.6°F Peak melting point: 114.5°C/238.1°F Low temperature brittleness: -50.0°C/-58.0°F Tensile strength @ break: 13.1/1,900 MPa/psi Elongation @ break: 120% Flexural modulus: 310.3/45,000 MPa/psi Hardness, Shore D: 54 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® FN 510-00

  20 micron low density polyethylene powder with a melt index of 5.

  Microthene FN 510-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.923 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FN 519-00

  20 micron low density polyethylene powder with a melt index of 5.Flow enhanced version of Microthene FN 510.

  Microthene FN 519-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FN 519-00 is a flow enhanced version of FN 510-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.9225 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 701-00

  35 mesh (500 micron) polyethylene powder with a melt index of 70.

  Microthene MN 701-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/Matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 710-20

  50 mesh (292 micron) polyethylene powder with a melt index of 22.

  Microthene MN 710-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 711-20

  35 mesh (500 micron) polyethylene powder with a melt index of 22.

  Microthene MN 711-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 714-00

  50 mesh (292 micron) polyethylene powder with a melt index of 70.

  Microthene MN 714-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb BG50LB

• 

  Microthene® MN 722-00

  50 mesh (292 micron) polyethylene powder with a melt index of 3.7

  Microthene MN 722-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 3.7 g/10 min Density: 0.923 g/cc Vicat softening point: 94.6°C/202.3°F Peak melting point: 109.0°C/228.2°F Low temperature brittleness: -68.1°C/-90.6°F Tensile strength @ break: 11.8/1,720 MPa/psi Elongation @ break: 610% Flexural modulus: 330/47,800 MPa/psi Hardness, Shore D: 56/50 max/15 sec Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® MN 727-00

  16 mesh (1190 micron) polyethylene powder with a melt index of 24.

  Microthene MN 727-00 is a 16 mesh (1190 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 25 g/10 min Density: 0.924 g/cc Vicat softening point: 86.4°C/187.5°F Peak melting point: 109.6°C/229.3°F Low temperature brittleness: -28.3°C/-18.9°F Tensile strength @ break: 8.4/1,220 MPa/psi Elongation @ break: 110% Flexural modulus: 342/49,600 MPa/psi Hardness, Shore D: 56/49 max/15 sec Particle shape: Irregular Average particle size: 16 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

  Manufacturer: LyondellBasell | Product Line: Microthene® G Ground Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Stoner® A320 Mold Cleaner

  Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for molds.

  Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for rotational molds, injection molds, cast urethane molds & more. This powerful, high pH concentrate removes oily dirt, grime, mold release and left behind resin on rotational molds. Powerful, concentrated, water-based all-purpose cleaner for rotational molds Quickly cleans within seconds Reduces the need for sandblasting and breaking down molds Safe for use on all rotational mold finishes, plastic, rubber, waxes and metal. <iframe width="397" height="224" src="https://www.youtube.com/embed/WCU5foP6N78" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Pail, 5gl Pail

• 

  Trilene FreeFlow® 65

  Dry free flowing powder form of Ethylene Propylene (EPDM) terpolymer with 10% diene content.

  Trilene FreeFlow® 65 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. It is used as an additive in rubber compounds to reduce viscosity. It also acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. The low molecular weight of Trilene Freeflow®65 offers significant processing advantages in compounds with a high loading of fillers. Trilene Freeflow® 65 is supplied in a powder form, allowing for easier handling. Ethylene/Propylene: 50/50 Silica content: 32% Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 47,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 39.6828lb Carton, 50lb Carton

• 

  Trilene FreeFlow® 67

  Dry free flowing powder form of Ethylene Propylene (EPDM) terpolymer with 7.7 % diene content.

  Trilene FreeFlow® 67 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. It is used as an additive in rubber compounds to reduce viscosity. It also acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. The low molecular weight of Trilene Freeflow® 67 offers significant processing advantages in compounds with a high loading of fillers. Trilene Freeflow® 67 is supplied in a powder form, allowing for easier handling. Ethylene/Propylene: 46/54 Silica content: 32% Degree of Unsaturation (% Diene): 7.7% Type of Diene: ENB Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 39,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses in Aerospace and Automotive industry Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene FreeFlow® CP-1100

  Dry free flowing powder form of Ethylene Propylene (EPDM) Copolymer.

  Trilene FreeFlow® CP-1100 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. Trilene FreeFlow® CP-1100 offers the same advantages of Trilene® CP-1100, such as FDA approval and being a non-blooming plasticizer, with the added of benefit of being easier to handle since it is supplied as a dry powder. Trilene FreeFlow® CP-1100 offers significant processing advantages in compounds with a high loading of fillers. Ethylene/Propylene: 43/57 Silica content: 32% Color: White to light tan Specific Gravity: 1.04 Molecular Weight by GPC (Da): 12,000 Brookfield Viscosity (cP, RVT #7 at 40°C: 22,500 Brookfield Viscosity (cP, RVT #7 at 100°C: 1,100 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene FreeFlow® CP-80

  Dry free flowing powder form of Ethylene Propylene (EPDM) Copolymer.

  Trilene FreeFlow® CP-80 is a blend of EPDM and silica in powder form with 68% EPDM and 32% silica. Trilene FreeFlow® CP-80 offers the same advantages of Trilene® CP-80, such as FDA approval and being a non-blooming plasticizer, with the added of benefit of being easier to handle since it is supplied as a dry powder. Trilene FreeFlow® CP-80 offers significant processing advantages in compounds with a high loading of fillers. Ethylene/Propylene: 41/59 Silica content: 32% Color: White to light tan Specific Gravity: 1.05 Molecular Weight by GPC (Da): 23,000 Brookfield Viscosity (cP, RVT #7 at 60°: 500,000 Brookfield Viscosity (cP, RVT #7 at 100°: 76,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Faster incorporation into the mix Reduced scrap and waste Same functionality as liquid Easy to weigh Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene® 65

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.

  Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case

• 

  Trilene® 67

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 9.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 67 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 67 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 67 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 46/54 Degree of Unsaturation (% Diene): 9.5% Type of Diene: ENB Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 39,000 Brookfield Viscosity (cP, RVT #7 at 60°: 900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 128,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case, 50lb Carton

• 

  Trilene® 77

  Low molecular weight Ethylene Propylene (EPDM) terpolymer with 10.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 77 is a crystalline waxy EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 77 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 77 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Trilene® 77 is easier to handle during mixing compared to Trilene® 65 and 67 since it is a solid at room temperature. Ethylene/Propylene: 74/26 Degree of Unsaturation (% Diene): 10.5% Type of Diene: ENB Color: Pale Yellow, Waxy solid Specific Gravity: 0.86 Molecular Weight by GPC (Da): 27,000 Brookfield Viscosity (cP, RVT #7 at 60°: 800,000 Brookfield Viscosity (cP, RVT #7 at 100°: 102,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process East to weigh before mixing Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Trilene® CP-1100

  Low molecular weight Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and lubricants.

  Trilene® CP-1100 is an Ethylene-Propylene liquid Copolymer that is used as a plasticizer in rubber compounds. Unlike the Trilene® terpolymers, Trilene® CP-1100 it does not crosslink with the resin but can still offer the benefit of a non-blooming plasticizer without degrading the mechanical properties of the compound. It is less viscous compared to the terpolymers and can be used in applications and can be used in applications that need FDA approval. Trilene® CP-1100 can also be used in lubricants as a thickener providing good shear properties and low temperature flexibility. Ethylene/Propylene: 43/57 Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 6,400 Brookfield Viscosity (cP, RVT #7 at 60°: 19,000 Brookfield Viscosity (cP, RVT #7 at 100°: 1,000 Volatiles at 100ºC (212ºF): <0.5% Easier to process compared to the terpolymers Non extractable Maintains mechanical properties Non-volatile FDA approved Thermal and oxidative stability Improved ageing properties Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Lubricants

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum

• 

  Trilene® CP-80

  Low molecular weight Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and lubricants.

  Trilene® CP-80 is an Ethylene -Propylene liquid Copolymer that is used as a plasticizer in rubber compounds. Unlike the Trilene® terpolymers, CP-80 does not crosslink with the resin but can still offer the benefit of a non-blooming plasticizer without degrading the mechanical properties of the compound. It is less viscous compared to the terpolymers and can be used in applications that need FDA approval. Trilene® CP-80 can also be used in lubricants as a thickener providing good shear properties and low temperature flexibility. Ethylene/Propylene: 41/59 Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 23,000 Brookfield Viscosity (cP, RVT #7 at 60°: 500,000 Brookfield Viscosity (cP, RVT #7 at 100°: 76,000 Volatiles at 100ºC (212ºF): <0.5% Easier to process compared to the terpolymers Non extractable Maintains mechanical properties Non-volatile FDA approved Thermal and oxidative stability Improved ageing properties Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Lubricants

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 136.079kg Drum, 300lb Drum, 44lb Case