Overview

Our products utilized in open mold casting for elastomer processing. There are additional filters available by chemistry, end market and function.

25 Products
1
Microthene® MN 722-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 3.7
2
Stoner® A320 Mold Cleaner container
Stoner® A320 All-Purpose Cleaner is a time-saving, concentrated, water-based cleaner for molds. Stoner® A320 quickly cuts through any color and resin build-up in molding applications.
3
Trilene® CP-2000 container
Low viscosity Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and plastics.
4
Trilene® CP-80 container
Trilene® CP-80 is a high-viscosity and low-molecular weight Ethylene Propylene Diene Terpolymer (EPDM) liquid for use in elastomers, lubricants, grease, and oils.
5
Microthene® FA 700-00 container
20 micron high density polyethylene powder with a melt index of 10.
6
Element14™ PDMS 500 container
Element14™ PDMS 500 is a low viscosity, linear polydimethylsiloxane polymer.
7
Microthene® MN 710-20 container
50 mesh (292 micron) polyethylene powder with a melt index of 22.
8
Trilene FreeFlow® CP-80 container
Free-flowing and high viscosity Ethylene Propylene (EPDM) Copolymer similar to CP-80 but supplied in a powder form.
9
Microthene® MN 711-20 container
35 mesh (500 micron) polyethylene powder with a melt index of 22.
10
Microthene® MN 727-00 container
16 mesh (1190 micron) polyethylene powder with a melt index of 24.
11
Microthene® MN 701-00 container
35 mesh (500 micron) polyethylene powder with a melt index of 70.
12
Microthene® MN 714-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 70.
13
Trilene FreeFlow® 67 container
Dry free flowing powder form of Ethylene Propylene (EPDM) terpolymer with 7.7 % diene content.
14
Element14™ PDMS 350 container
Element14™ PDMS 350 is a low viscosity, linear polydimethylsiloxane polymer.
15
Armeen® 18D, Flake container
Armeen® 18D is a primary amine with an 18 carbon hydrophobic tail. It is used as a filming amine for mold release and corrosion inhibition applications.
16
Microthene® FN 519-00 container
20 micron low density polyethylene powder with a melt index of 5. Flow enhanced version of Microthene FN 510.
17
Element14™ PDMS 50 container
Element14™ PDMS 50 is a low viscosity, linear polydimethylsiloxane polymer.
18
Trilene® CP-1100 container
Low molecular weight and moderate viscosity Ethylene-Propylene (EPDM) liquid Copolymer for use in elastomers and lubricants.
19
Microthene® FN 510-00 container
20 micron low density polyethylene powder with a melt index of 5.
20
Element14™ PDMS 1000 container
Element14™ PDMS 1000 is a low viscosity, linear polydimethylsiloxane polymer.
Page
Displaying 1 - 20 of 25 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
Janssen PMP ZINC PYRION™ thumbnail
Janssen PMP offers various pyrithione-based antimicrobials under the PYRION™ brand to reduce microbrial growth in various applications. Zinc Pyrion™ can be used as an antimicrobial agent in the plastics industry to safely protect against microorganisms.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.
POLYBOND™ and Recycling of Polyolefins thumbnail

The SI Group portfolio of POLYBOND™ coupling agents improves mechanical performance for recycled filled composites by strengthening the coupling bond.

Dorf Ketal Unilink® 4200 thumbnail
Dorf Ketal's Unilink® catalysts and aromatic chain extenders serve the global polyurethane and polyurea markets. Unilink can be used as effective curing agents for TDI and MDI formulations. Polymers or foam cured with Unilink show improved strength, hardness, adhesion, longer potlife, impact resistance and load bearing properties.