A technical grade, high-density, high-purity hydrocarbon that is suitable for use in fuels and fuel additives as well as in plasticizers and coatings.
Color: <5 Density: 748 Distillation Range: 48-50 Evaporation Rate: 1.4 Refractive Index: 1.405 Aniline Point: 18 Aromatic Content: <0.001 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 34.6 Kinetic Viscosity: 0.59
Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).
Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.
Secondary inhibitor (co-inhibitor) and antioxidant for nonfood fats and oils.
Eastman™ MTBHQ (mono t-butyl hydroquinone) is commonly used as a polymerization inhibitor and antioxidant in many industrial applications. Effective in higher temperatures due to its higher solubility and potency compared to unsubstituted hydroquinone. Appearance: Light tan solid Flash point: 171°C (340°F) Boiling point: 295°C (563°F) Melting point: 125°C (257°F) Specific gravity 20°C/20°C: 1.05 Molecular weight: 166.22 CAS: 1948-33-0 Very effective polymerization inhibitor Good performing antioxidant in unstable organic liquids Excellent performance as a heat and stabilizer for pressure-sensitiveness adhesives Used as a polymerization inhibitor and industrial antioxidant in many applications.
Highly effective process inhibitor used in the production of highly reactive unsaturated polyesters.
Eastman™ THQ (Toluhydroquinone) is a tan to white crystalline solid that goes through similar chemical reactions as Hydroquinone. However, due to the presence of a methyl group in the ortho position, THQ becomes a highly active inhibitor in the free radical polymerization of vinyl monomers and unsaturated polyesters. Appearance: Off-white solid Flash point: 172°C (342°F) Boiling point: 279°C (534°F) Melting point: 127°C (261°F) Specific gravity: 1.3 Molecular weight: 124.13 CAS: 95-71-6 Better solubility in styrene than Hydroquinone Highly effective cook stabilizer in unsaturated polyesters Good performing antioxidant for oleates, linseed oil, and other nonfood fats and oils Used as an inhibitor, antioxidant, and intermediate manufacturing.
Primary inhibitor, lowest cost, most commonly used general-purpose inhibitor, antioxidant, and intermediate.
Eastman™ Hydroquinone Photographic is an industrial antioxidant that reacts quickly with oxygen. Along with being used as a primary inhibitor, it is also used as an intermediate to manufacture other antioxidants. Appearance: White crystals Flash point: 177°C (350°F) Boiling point: 286°C (547°F) Density @ 4°C: 1.34 g/mL Molecular weight: 110.11 CAS: 123-31-9 Low cost Effective stand-alone oxygen scavenger Reduces corrosion in water treatment applications as a catalyst Does not degrade to ammonia Reacts quickly to oxygen Used as a primary inhibitor to prevent oxidation and industrial applications.
Industrene® R is a Stearic Acid, typically used in rubber applications.
Industrene® saturated and unsaturated fatty acids are high-quality fatty acids obtained from animal fat and vegetable oils. Acid Number: 193 - 210 Gardner Color (1963): 0 - 10 Iodine Value: 0 - 10 Sap Value: 193 - 211 Titer: 52 - 62 Unsaponfiables: 0 - 1 Stearic acid Great for rubber applications Used for alkyd resins, rubber, mineral-flotation, adjuvants, foam depressants, caulking compounds, lubricants, buffing polishes, metallic soaps, abrasives, metal treating compounds, candles, crayons, emulsifiers, etc.
A technical grade hydrocarbon that is highly recommended for use in industrial and polymer processing applications.
Color: <5 Density: 624 Distillation Range: 27-29 Evaporation Rate: <1.0 Refractive Index: 1.354 Aromatic Content: <0.001 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 56.9 Kinetic Viscosity: 0.35
A high-purity hydrocarbon also known as 2-methylbutane; commonly used as a process medium for polypropylene and polyethylene manufacturing as well as in personal care applications.
Molecular weight: 72.1 Density: 620 Boiling Point: 27.8 Solidification Point: -160.0°C Refractive Index: 1.3450 Flash Point: <-35 Specific Heat: 2.258 Heat of Vaporization: 339.0 Vapor Pressure: 91.74 Surface Tension: 15.0 Kinematic Viscosity: 0.36
A high-density, high purity hydrocarbon also known as Toluene Hexahydride. It is commonly used in coating formulations, organic synthesis and chromatographic analysis.
Molecular weight: 98.2 Density: 769 Boiling point: 100.9 Solidification point: -126.2°C Refractive index: 1.4231 Flash point: -4 Specific heat: 1.875 Heat of vaporization: 323.2 Vapor pressure: 6.18 Surface tension: 23.8 Kinematic viscosity: 0.95
20 micron low density polyethylene powder with a melt index of 5.
Microthene FN 510-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.923 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics
n-Decane 95 Tech is a technical grade high-purity hydrocarbon excellently suited for crystallization, extraction and chromatography processes.
Color: <10 Density: 733 Distillation Range: 172-177 Evaporation Rate: 67 Refractive Index: 1.412 Aniline Point: 77 Aromatic Content: <0.01 Non-volatile Matter: <5 Flash Point: +45°C Vapor Pressure: 0.16 Kinetic Viscosity: 1.12
n-Decane 99 Pure is a pure grade high-purity hydrocarbon with a high boiling point (174.1°C) It is commonly used for special applications such as as injector testing fluid, solvent for room fragrances or oil for security printing inks.
Molecular weight: 142.3 Density: 730 Boiling point: 174.1 Solidification point: -29.7°C Refractive index: 1.4120 Flash point: 49 Specific heat: 2.103 Heat of vaporization: 276.3 Vapor pressure: 0.23 Surface tension: 23.9 Kinematic viscosity: 1.27
A clear & colorless high-purity hydrocarbon with a low vapor pressure of 0.02. It is commonly used as a distillation chaser and can also be an active component in fragrances or lubricants and greases.
Color: <10 Density: 753 Distillation Range: 214-219 Refractive Index: 1.422 Aniline Point: 85 Aromatic Content: <0.1 Non-volatile Matter: <5 Flash Point: +79°C Vapor Pressure: 0.02 Kinetic Viscosity: 1.87
A low-density, high-purity hydrocarbon making it a suitable choice for the production of butyl rubber or polybutadiene. It is also commonly used as a solvent or viscosity decreasing agent for the production of adhesives and thinners.
Color: <5 Density: 688 Distillation Range: 97-100 Evaporation Rate: 3.1 Refractive Index: 1.388 Aniline Point: 70 Aromatic Content: <0.02 Non-volatile Matter: <2 Flash Point: <-4°C Vapor Pressure: 3.9 Kinetic Viscosity: 0.58
A technical grade high-purity hydrocarbon with a wide variety of applications. It can be used as a solvent for varnishes, coatings or adhesives in the printing industry. Other common uses are as an intermediate in laboratory chemicals or as a...
Color: <5 Density: 665 Distillation Range: 68-70 Evaporation Rate: 1.5 Refractive Index: 1.375 Aniline Point: 68 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: <-20°C Vapor Pressure: 12.5 Kinetic Viscosity: 0.47
A pure grade, high-purity hydrocarbon ideally used as a carrier fluid for silicone oils and as a solvent for extraction of edible oils from seed and vegetable crops.
Molecular weight: 86.2 Density: 660 Boiling point: 68.7 Solidification point: -95.3°C Refractive index: 1.3750 Flash point: -23°C Specific heat: 2.263 Heat of vaporization: 316.5 Vapor pressure: 6.26 at 25°C Surface tension: 19.3 Kinematic viscosity: 0.61
A technical grade high-purity hydrocarbon suitable for crystallization, extraction, HPLC and SMB chromatography processes. This aliphatic solvent is also highly recommended for plastic foams.
Color: <5 Density: 723 Distillation Range: 150-154 Evaporation Rate: 24 Refractive Index: 1.405 Aniline Point: 74 Aromatic Content: <0.03 Non-volatile Matter: <5 Flash Point: +30°C Vapor Pressure: 0.38 Kinetic Viscosity: 0.96
A technical grade hydrocarbon commonly used for prep laboratory work and cleaning purposes. It can also be used as a blowing agent for styrenic foams and as a refrigerant.
Color: <5 Density: 631 Distillation Range: 36-38 Evaporation Rate: 1.0 Refractive Index: 1.358 Aniline Point: 69 Aromatic Content: <0.01 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 40.9 Kinetic Viscosity: 0.39
A high-purity hydrocarbon with physical and chemical properties similar to lower n-paraffins. This hydrocarbon is commonly used as a solvent in special applications such as home fragrances and security inks.
Color: <10 Density: 744 Distillation Range: 193-198 Refractive Index: 1.417 Aniline Point: 80 Aromatic Content: <0.1 Non-volatile Matter: <5 Flash Point: +67°C Vapor Pressure: 0.04 Kinetic Viscosity: 1.46
Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for molds.
Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for rotational molds, injection molds, cast urethane molds & more. This powerful, high pH concentrate removes oily dirt, grime, mold release and left behind resin on rotational molds. Powerful, concentrated, water-based all-purpose cleaner for rotational molds Quickly cleans within seconds Reduces the need for sandblasting and breaking down molds Safe for use on all rotational mold finishes, plastic, rubber, waxes and metal.
Powerful, concentrated, water-based all-purpose cleaner for rotational molds; Quickly cleans within seconds; Reduces the need for sandblasting and breaking down molds
Clear, colorless liquid used as a solvent in many applications and carries flame retardant attributes.
Eastman™ TEP (Triethyl Phosphate) is a process solvent that can also be used as a plasticizer for tough, fire-resistant plastics. Commonly used as an intermediate for agricultural chemicals when preparing TEPP (tetraethyl pyrophosphate). Appearance: Clear, colorless liquid Molecular weight: 182.16 Flash point: 99°C (210°F) Boiling point: 209°C (408°F) Specific gravity @ 20°C/20°C: 1.067-1.072 Viscosity @ 20°C: 1.76 cP Viscosity @ 71°C: 0.82 cP CAS: 78-40-0 Effective viscosity reducer in systems filled with aluminum trihydrate (ATH) Enhanced flame resistance in ATH systems Resin intermediates - Used as a viscosity reducer and flame retardant Oil field drilling chemicals - TEP is used in the manufacturing of oil and gas well fracturing agents known as fracturing gels Oil extraction aid - Used as a stimulant for deep wells (most US production) Polyester production - Used in the production of PET, evidently as a catalyst Silicate glass produciton - Used to incorporate phosphorous into silicate glass
Yields a long life release coating (3000+ cycles) for natural rubber parts, BR (Butadiene Rubber) parts and other polymers. Best release for Fluoropolymer parts.
Exhibits outstanding release or anti stick properties with low friction. Appearance: White liquid Odor: alcohol-like Freezing Point: -89 Degrees C Volatile: 95% Partly H2O soluble Very clean and non-oily. Does not stain.