Overview

Our list of plastic products for use in medical end markets with additional filtering by chemistry, process, function and resins.

113 Products
1
Hydroquinone Industrial Photographic container
Primary inhibitor, lowest cost, most commonly used general-purpose inhibitor, antioxidant, and intermediate.
2
TraSys® 500 container
Hi-Heat (open flame) mold release for rotational molding applications reaching above 600° F.
3
Kemamide® E-180, Powder container
Fatty amide used in thermoplastic resins that imparts slip and anti-block characteristics
4
Microthene® MN 722-00 container
50 mesh (292 micron) polyethylene powder with a melt index of 3.7
5
Charflam 200-M container
Intumescent flame retardant
6
TraSys® ZIP SLIP® container
ZIP-SLIP® is an excellent preventative maintenance product that seals the edges of a mold when applied to the parting line of a rotational mold.
7
PhosGard® TCPP container
Chlorinated phosphate ester with 9.5% phosphorus
8
Calcium Stearate FN VEG, Powder container
Vegetable source. This food grade carboxylate is derived from hydrogenated fatty acids and is used as a catalyst neutralizer.
9
Kemamide® S, Powder container
Same as Kemamide® S Bead, in powder form.
10
n-Hexane 99 Pure container
A pure grade, high-purity hydrocarbon ideally used as a carrier fluid for silicone oils and as a solvent for extraction of edible oils from seed and vegetable crops.
11
BroShield 67-B container
High purity non-diphenyl oxide.
12
ANOX™ BB011 Powder container
Synergistic blend of powder form phenolic and phosphite antioxidants to protect polymers both during processing and long term aging.
13
PARALOID™ EXL 2330 container
PARALOID™ EXL 2330 is an acrylic core/shell modifier ideal for a wide variety of applications that require high impact strength at temperatures as low as -10°C, as well as good heat and UV stability.
14
PARALOID™ EXL 2314 container
PARALOID™ EXL 2314 is a highly efficient acrylic toughening agent for engineering resins which has been tailored for various engineering polymers and its blends.
15
NAUGARD™ DSTDP container
NAUGARD™ DSTDP is a thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.
16
Twinkling Star ATO container
Synergist used in conjunction with brominated or Chlorinated compounds to reduce flammability.
17
Pationic® 901RF container
Pationic® 901RF is a glycerol monostearate (GMS) with 95% monoglyceride derived from hydrogenated vegetable oil and formulated for heat stability Pastille version of Pationic 901K
18
Kemamide® W-40, Powder container
Same as Kemamide® W-40 Prill, in powder form.
19
Microthene® FA 700-00 container
20 micron high density polyethylene powder with a melt index of 10.
20
Kemamide® EBS PR container
Kemamide® EBS PR is a ethylene bis stearamide wax, similar to Kemamide® EBS but supplied in prill form.
Page
Displaying 1 - 20 of 113 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
SI Group LOWILITE™ Hindered Amine Light Stabilizers thumbnail
LOWILITE™ Hindered Amine Light Stabilizers (HALS) work by free radical scavenging to inhibit degradation of the polymer.
SI Group ALKANOX™ 240 Phosphite Antioxidant thumbnail
ALKANOX™ 240 phosphite is an organo-phosphite antioxidant that exhibits excellent hydrolytic stability.
Amidas Grasas PMC Kemamide® thumbnail
La línea de amidas Kemamide® cuenta con una amplia selección de aditivos plásticos, aditivos de caucho y lubricantes que son adecuados para su inclusión en poliolefinas, resinas de ingeniería, elastómeros y PVC.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.