Overview

Mold releases are critical for specific plastic processing and parts. Here are ChemPoint's mold releases with filters by resin type and chemistry.

46 Products
1
TraSys® 500 container
Hi-Heat (open flame) mold release for rotational molding applications reaching above 600° F.
2
Kemamide® E-180, Powder container
Fatty amide used in thermoplastic resins that imparts slip and anti-block characteristics
3
Kemamide® EBS container
Kemamide® EBS is a ethylene bis stearamide wax that benefits calendering processes, injection and blow molding, and extrusion processing.
4
Epolene® E-14P Polymer container
Epolene® E-14P is a low-density oxidized polyethylene wax powder. It is useful as a lubricant for flexible and rigid PVC and as a processing aid for color master batch.
5
Kemamide® S, Powder container
Same as Kemamide® S Bead, in powder form.
6
Kemamide® B, Bead container
Kemamide® B (Bead) is a saturated fatty monoamide formulated from a mixture of behenic acid and arachidic and is most commonly used for its anti-block properties
7
ZELEC® 2-EHP container
ZELEC® 2-EHP is specialty blend of phosphate esters. It is commonly used as an internal mold release agent in epoxy, polyester, and vinyl ester resin molding.
8
Kemamide® W-40, Powder container
Same as Kemamide® W-40 Prill, in powder form.
9
Kemamide® EBS PR container
Kemamide® EBS PR is a ethylene bis stearamide wax, similar to Kemamide® EBS but supplied in prill form.
10
TraSys® 414 container
Heavy-duty release ideal for parting lines, removable pins and inserts, and complex molds with negative spaces and high difficulty in de-molding.
11
Kemamide® B, Powder container
Kemamide® B (Powder) is a saturated fatty monoamide formulated from a mixture of arahidic and behenic acid and is commonly used for its anti-block properties or as a blending agent
12
Kemamide® W-40 DF, Prill container
This product is a wax that benefits calendering processes, injection and blow molding, and extrusion processing.
13
Kemamide® W-20, Pellet container
Kemamide® W-20 is a pellet form, synthetic wax with a relatively high melting point and excellent slip properties.
14
TraSys® 715 container
Light release designed for a consistent, controlled release in rotational molding. Formulated for large or thin plastic parts.
15
TraSys® 9825 container
Ideal for compression, transfer and injection molding of rubber compounds (great for polished surfaces)
16
Pationic®1083 container
Pationic® 1083 is a glycerol mono oleate product and has a 52% minimum alpha-monoester content
17
TraSys® 258 container
Yields a long life release coating (3000+ cycles) for natural rubber parts, BR (Butadiene Rubber) parts and other polymers. Best release for Fluoropolymer parts.
18
ZELEC® NE container
ZELEC® NE is a neutralized phosphate ester. It is commonly used as an internal mold and as non-durable antistatic agent.
19
TraSys® 818 container
TraSys® 818 is a fluorochemical mold release coating for hot mold applications. It provides excellent performance with a clean surface and no oil residuals.
20
Kemamide® VO, Bead container
Derived from oleic acid from vegetable sources, this product is an unsaturated fatty primary amide
Page
Displaying 1 - 20 of 46 Results
Can’t find the right product?
Talk To An Expert
Industry Resources
Momentive Tospearl™ thumbnail
Tospearl™ series resins can decrease the contact between film layers, preventing them from sticking together. The silicone improves clarity in the films while requiring lower usage levels than other antiblocks like talc or mica.
SI Group Polybond thumbnail
PB 3349 allows for high load rates of HFFR without sacrificing tensile strength, tensile modulus and elongation properties of your compounds.
SI Group WESTON™ Liquid Phosphites thumbnail
SI Group's Morgantown, WV facility is the world’s largest phosphite production facility.
SI Group LOWILITE™ Hindered Amine Light Stabilizers thumbnail
LOWILITE™ Hindered Amine Light Stabilizers (HALS) work by free radical scavenging to inhibit degradation of the polymer.
SI Group ALKANOX™ 240 Phosphite Antioxidant thumbnail
ALKANOX™ 240 phosphite is an organo-phosphite antioxidant that exhibits excellent hydrolytic stability.
Amidas Grasas PMC Kemamide® thumbnail
La línea de amidas Kemamide® cuenta con una amplia selección de aditivos plásticos, aditivos de caucho y lubricantes que son adecuados para su inclusión en poliolefinas, resinas de ingeniería, elastómeros y PVC.
SI Group ULTRANOX™ 800 thumbnail
Polypropylene systems have high stabilization demands. In order to meet increasing melt, color and storage performance standards SI Group™ has launched the ULTRANOX™ 800 antioxidant series.
SI Group Polybond 3200 thumbnail
The POLYBOND™ 3200 from SI Group is legendary for its performance as a coupling agent in plastic applications. The 3200 outperforms other coupling agents with superior thermal stability, color control and less degradation.