There are no products found that meet this criteria.

• 

  132

  This aluminum salt derived from distilled, hydrogenated fatty acids is designed for protective and decorative coatings. Has the highest free fatty acid content and lowest aluminum metal content.

  This product has strong lubrication characteristics, thickening ability, thermal stability, and water-repellent characteristics. Total Ash: 5.50 – 7.50 Fineness % Thru 20 Mesh: 100.00 (Min) Fineness % Thru 200 Mesh: 90.00 – 100.00 Free Fatty Acids (As Stearic): 25.0 – 35.0 Water: 0.00 – 1.00 Water Soluble Salts: 0.00 – 1.00 Yields the lowest viscosity increase. Great for dry lubrication and thickening of ink manufacture. It is commonly used in the production of coatings(protective and decorative) such as paints, enamels, varnishes, and lacquers. additionally, it acts as a dry lubricant in metal processing and as a water repellents.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 25lb Bag

• 

  ACTICELL® U

  Cost effective activator and accelerator for chemical blowing agents that lowers the decomposition temperature of CELOGEN® AZ and OT, allowing the manufacture of cellular goods at lower temperatures.

  ACTICELL® U is a non-dusting activator and accelerator for CELOGEN® chemical blowing agents. It lowers the decomposition temperature of CELOGEN® AZ and OT, allowing cellular materials to be manufactured at lower temperatures. When used at the normal decomposition temperature for CELOGEN® AZ and OT, ACTICELL® U improves productivity in natural and synthetic rubbers. Appearance: Fine white powder Specific gravity: 1.34 Melting point: 129-134°C Soluble: Water (except for surface coating) Slightly soluble: Acetone Insoluble: Benzene, gasoline Cost effective activator and accelerator Non-dusting Disperses easily Lowers decomposition temperature of CELOGEN® AZ and OT Relatively non-staining and non-discoloring Recommended dosing: For butyl and crosslinked polyethylene use a dose rate equal to the CELOGEN® AZ or OT used For cellular natural rubber, SBR, NBR, chloroprene rubber use 50% of the CELOGEN® AZ dose For EPDM use 25% of the CELOGEN® AZ dose

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 50lb Box

• 

  Armoslip 18 LF Beads

  Armoslip 18 LF beads are stearamides with typical usage in caps and closures or in rubbers and inks

  These fatty amides provide a range of plastic additives, wax additives and lubricants to various plastics applications Free Fatty Acid .05% Max (as Stearic Acid) Assay 98.5% Min Moisture 0.1% Max Iodine value (g I₂/100 g): 3 max Melting point: 99-109°C Excellent anti-blocking activity Facilitates over-printing and wet-printing Water soluble

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides

• 

  Armoslip E, Beads

  Armoslip E beads are formulated from refined rapeseed oil and offers excellent slip effects and provides good anti-blocking performance

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Assay 98.5% Min Free Fatty Acid Content 0.2% Max Moisture 0.05% Max Iodine Value 74 Min 79 Max (g I₂/100 g Melting point 80-84°C Rapeseed oil based Low volatility and high temperature stability

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 44.092lb Bag

• 

  BHT

  Non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including crystalline.

  Sasol BHT is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 100lb Drum, 50lb Bag

• 

  BIK® OT

  Activator for blowing agents and accelerators that lowers the decomposition temperature of AZ type blowing agents.

  BIK® OT is a surface treated urea used as an activator for thiazole, thiuram and dithiocarbamate accelerators. It is an efffective promoter for Celogen AZ type blowing agents in SBR, butyl, EPDM, and neoprene and natural rubbers. Appearance: Fine white powder Specific Gravity: 1.31 Melting Point: 129-134 °C Soluble: Water (except for surface coating) Insoluble: Benzene, gasoline Reduces odor when used with nitrosamine-type blowing agents Promoter for AZ-type blowing agents in NR, SBR, IR, EPDM and CR rubbers Lowers the decomposition temperature of AZ-type blowing agents in cellular products Activator for thiuram, thiazole, and dithiocarbamate accelerators Relatively nonstaining Relatively nondiscoloring

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Box

• 

  CELOGEN® 754A

  Chemical foaming agent for thermoplastics and rubber with a moderate decomposition temperature that does not require the addition of an activator.

  CELOGEN® 754A is a chemical blowing agent designed for rubber and thermoplastics. It contains an effective activation system; adding strong activators such as zinc oxide, zinc stearate or ACTICELL® U is unnecessary unless lowering the decomposition temperature is desired. Appearance: Yellow-orange powder Specific Gravity @25 °C: 1.68 Decomposition Point: 165-180 °C Gas Yield: 200 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Contains an effective activation system Natural and synthetic rubbers, thermoplastics, ethylene vinyl acetate, shoe soles, automotive extrusions

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® 760A

  Self nucleating chemical blowing agent for thermoplastics and rubber that prevents cyanuric acid plate-out forming deposits on dies, molds, and screws.

  CELOGEN® 760A is a self-nucleating chemical blowing agent designed for thermoplastics and rubber. It prevents the formation of cyanuric acid deposits on dies, molds and screws. CELOGEN® 760A has a very small particle size and a high decomposition temperature. Form: Light yellow free flowing powder Particle size: 4 μm Specific gravity: 2.06 Decomposition point: 200-205°C (394-401°F) Gas yield: 160 ml/g (polymer dependent) Prevents cyanuric acid plate-out deposits on screws, dies, and mold surfaces Self nucleating Food contact approvals

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 33.06lb Box

• 

  CELOGEN® 765A

  Chemical blowing agent for thermoplastics and rubber with that does not require the addition of an activator. Similar to CELOGEN® 754A but with a lower decomposition temperature.

  CELOGEN® 765A is a chemical blowing agent designed for rubber and thermoplastics. It is similar to CELOGEN® 754A but has a lower decomposition temperature. CELOGEN® 765A contains a very effective activation system; adding strong activators such as zinc oxide, zinc stearate or ACTICELL® U is unnecessary unless lowering the decomposition temperature is desired. Form: Yellow powder Specific gravity @ 25°C: 1.65 Decomposition point: 152-160°C (306-320°F) Gas yield: 180 ml/g Decomposition gases: N₂, CO₂, CO, NH₃ Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Contains an effective activation system Compression molded closed cell sponge, shoe soles, automotive extrusions

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® 780

  Chemical blowing agent with a very low decomposition temperature designed for use with silicone gums that does not require the addition of an activator.

  CELOGEN® 780 is a chemical blowing agent with a very low decomposition temperature designed for compression molded and extruded silicone gums. It contains a very effective activation system; adding strong activators such as zinc oxide, zinc stearate or ACTICELL® U is unnecessary unless lowering the decomposition temperature is desired. Form: Yellow-orange powder Specific gravity @ 25°C: 1.78 Decomposition point: 142-154°C (288-309°F) Gas yield: 190 ml/g Decomposition gases: N₂, CO₂, CO, NH₃ Soluble: Alkaline solutions Insoluble: Most organic solvents, water Very low decomposition temperature Non-discoloring Decomposition residue is white Contains a very effective activation system Silicone gums, sponge rubber, expanded plastic, extruded profiles and tube applications

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Box

• 

  CELOGEN® AZ120

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams.

  CELOGEN® AZ120 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and small particle size. CELOGEN® AZ120 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific gravity @ 25 °C: 1.66 Decomposition point: about 190-220 °C Gas yield: 220 ml/g Decomposition gases: N₂, CO₂, CO, NH₃ Particle Size: 3-5.5 µm Soluble: Alkaline solutions Insoluble: Most organic solvents and water Non-discoloring Decomposition residue is white Very small particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Box

• 

  CELOGEN® AZ130

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams. Similar to CELOGEN® AZ120 but with a larger particle size.

  CELOGEN® AZ130 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and small particle size. CELOGEN® AZ130 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific gravity @ 25 °C: 1.66 Decomposition point: about 190-220 °C Gas yield: 220 ml/g Decomposition gases: N₂, CO₂, CO, NH₃ Particle Size: 5-6 µm Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Small particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® AZ150

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams. Similar to CELOGEN® AZ130 but with a larger particle size.

  CELOGEN® AZ150 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and small particle size. CELOGEN® AZ150 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific Gravity @ 25 °C: 1.66 Decomposition Point: about 190-220 °C Gas Yield: 220 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Particle Size: 8-10 µm Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Small particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® AZ1901

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams. Similar to CELOGEN® AZ9370 but with a larger particle size.

  CELOGEN® AZ1901 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and small particle size. CELOGEN® AZ1901 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific Gravity @ 25 °C: 1.66 Decomposition Point: about 190-220 °C Gas Yield: 220 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Particle Size: 14.1-16 µm Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Moderate particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® AZ2500

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams. Similar to CELOGEN® AZ1901 but with a larger particle size.

  CELOGEN® AZ2500 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and large particle size. CELOGEN® AZ2500 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific Gravity @ 25 °C: 1.66 Decomposition Point: about 190-220 °C Gas Yield: 220 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Particle Size: 16-25 µm Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Large particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  CELOGEN® AZ9370

  Azodicarbonamide foaming agent for producing many types of polymeric and elastomeric closed-cell foams. Similar to CELOGEN® AZ150 but with a larger particle size.

  CELOGEN® AZ9370 is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively high decomposition temperature and moderate particle size. CELOGEN® AZ9370 can be catalyzed by a variety of chemicals. Strong activators like zinc oxide, zinc stearate, and ACTICELL® U; moderate activators like barium stearate, calcium stearate, citric acid, and triethanolamine; or weak activators like adipic acid, benzoic acid, salicylic acid, and calcium oxide. Form: Yellow-orange powder Specific Gravity @ 25 °C: 1.66 Decomposition Point: about 190-220 °C Gas Yield: 220 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Particle Size: 12-14 µm Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Moderate particle size Food contact approvals Sponge rubber, expanded plastics

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  FN Powder

  A fused stearate derived from hydrogenated fatty acids. Used as a catalyst neutralizer in polypropylenes.

  Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. Total Ash: 9.30 – 11.50 Fineness, % Thru 325 Mesh: 85.00 – 100.00 Free Fatty Acids: 0.00 – 1.00 Water %: 0.00 – 3.50 Appearance: White Powder Catalyst neutralizer Lubrication in polypropylene's Anti-static agent and acid scavenger in PVC Calcium Stearate FN Powder is a wide variety of applications ranging from waterproofing/ water repelling fabric, stops caking in dehydrated vegetables, as well as a stabilizer in PVC production.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 50lb Bag, 50lb Bag, 50lb Bag

• 

  Free FLow

  Non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including free-flowing spherical particles.

  Sasol BHT is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 100lb Drum, 50lb Bag

• 

  Impruvol 20

  Non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.

  Sasol Impruvol 20 is a molten form of BHT, a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

  Manufacturer: Sasol | Product Line: Sasol Bht Antioxidant | Package Sizes: 390lb Drum

• 

  Kemamide® B, Bead

  Kemamide® B (Bead) is a saturated fatty monoamide formulated from a mixture of behenic acid and arachidic and is most commonly used for its anti-block properties

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 - 4.00 Amide Content: 95.0 - 100.0% Gardner Color: 0.0 - 4.0 Iodine Value: 0.0 - 4.0 Closed Tube Melt Point: 98.0 - 106.0 °C Water Content: 0.00 - 0.25% Appearance: White bead Flash Point (COC): 257 °C Density @ 130 °C: 0.807 g/mL Density @ 160 °C: 0.843 Viscosity @ 130 °C: 6.5 cP Heat of Fusion: 12.7 kcal/mol Fire Point (COC): 284 °C Food contact approved Bead form allows for easy transport Mar-resistant agents, textile softeners and water-repellents,

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® E Ultra, Bead

  Formulated from unsaturated fatty primary monoamide from vegetable sources and demonstrates excellent color stability

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide 98% Gardner Color: 1 Closed Tube Melt Point: 82 °C Water: 0.05% Does not contain Phthalates or BPA Available in bags, drums, and bulk sacks

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum, 1999.5722lb Supersac, 50lb Bag

• 

  Kemamide® S, Bead

  Formulated from Stearic Acid, this product is a saturated fatty primary monoamide and is most commonly used for its anti-block properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® S, Powder

  Same as Kemamide® S Bead, in powder form.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum, 50lb Bag

• 

  Kemamide® U, Pastilles

  Formulated from Oleic Acid, Kemamide® U is an unsaturated fatty monoamide and is commonly used for its slip properties but can also be used for its anti-block properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 97.0 – 100.0 Closed Tube Melt Point °C: 68.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 90.0 Water %: 0.00 – 0.20 Low solubility in water Available in multiple forms

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® U, Powder

  Same as Kemamide® U Pastille, in powder form

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 97.0 – 100.0 Closed Tube Melt Point °C: 68.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 90.0 Water %: 0.00 – 0.20 Low solubility in water Available in multiple forms

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® VO, Bead

  Derived from oleic acid from vegetable sources, this product is an unsaturated fatty primary amide

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  Kemamide® VO, Powder

  Same as Kemamide® VO Bead, in powder.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 25kg Bag, 55lb Bag

• 

  Kemamide® W-20, Pellet

  Synthetic wax with a relatively high melting point and excellent slip properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® W-20, Prill

  Synthetic wax with a relatively high melting point and excellent slip properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® W-40 DF, Prill

  This product is a wax that benefits calendering processes, injection and blow molding, and extrusion processing.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 Compatible with a wide variety of waxes and plasticizers Increases surface's resistance to salt, heat, moisture, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® W-40 Prill

  Formulated from stearic acid, this is used a synthetic wax, as a process lubricant.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® W-40, Powder

  Same as Kemamide® W-40 Prill, in powder form.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 5.0 Garner Color (1963): 0.0 – 3.0 Closed Tube Melt Point °C: 140.0 – 145.0 Total Amine Value: 0.00 – 5.00 Total Ash: 0.00 – 0.05 Fineness % Thru 100 Mesh: 100.00 (Min) Fineness % Thru 325 Mesh: 99.50 – 100.00 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Lithium Stearate 304

  Designed to satisfy hydrocarbon and synthetic lubricant-based greases.

  The lithium salt of distilled, hydrogenated fatty acids from animals or vegetables. ALKALINITY %: 0.00-0.15 FINENESS - THRU 200 MESH %: 99.00-100.00 FINENESS - THRU 40 MESH %: 100.00-100.01 LITHIUM CONTENT %: 2.40-2.60 WAP24A WATER %: 0.00-2.00 Polymeric coatings Zinc-silicone dioxide coatings Sealing gaskets for food containers Safe in articles that are in contact with food Can be used as a strong binder in certain makeup such as eye shadow, blushes, and other cosmetics. This can also be used as a lubricant in high temperatures.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 25lb Bag

• 

  LOWINOX® AH25

  Sterically hindered phenolic antioxidant designed for use in unvulcanized rubber, giving excellent protection from oxygen and UV exposure.

  LOWINOX® AH25 is a sterically hindered phenolic antioxidant that provides excellent protection for unvulcanized rubber adhesives, tapes, and films from oxygen and UV initiated cracking. It prevents tack loss and reduces cold flow of unvulcanized rubber. LOWINOX® AH25 is a very effective stabilizer and anti-skinning agent for a variety of coatings, and provides scorch protection in wire and cable applications. Appearance: White to cream colored powder Molecular Weight: 250 g/mol Melting Point: 179 °C Bulk Density: 290 kg/m³ Volatility (2g/2h/80 °C): 0.5% max Ash Content (5g/800 °C): 0.1% max Food contact approvals Good scorch resistance for wire and cable Anti-skinning agent for coatings Excellent protection from oxygen and UV exposure Prevents tack loss Reduces cold flow Unvulcanized rubber adhesives, tapes, and films; wire and cable applications, coatings

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 44.09lb Bag

• 

  LOWINOX® CPL

  Low volatility phenolic antioxidant that is especially effective in stabilizing isoprene and butadiene polymers.

  LOWINOX® CPL is a non-staining, non-discoloring phenolic antioxidant with low volatility. It is designed to stabilize isoprene and butadiene polymers such as SBR, MBS, and ABS, and is also effective in protecting natural and synthetic rubbers. A high resistance to extraction through boiling or washing makes LOWINOX® CPL an excellent choice for use in carpet backing. Appearance: Cream colored or amber powder or pellets Softening Point: > 105 °C Molecular Weight: 600-700 g/mol Bulk Density: 360 kg/m³ (powder), 600 kg/m³ (pellets) Density @ 20 °C: 1.04 g/cm³ Broad food-contact approvals Non-discoloring Non-staining High resistance to extraction Easily dispersed isoprene, butadiene polymers, natural rubber, synthetic rubber, latex, SBR, ABS, ASA, MBS, SBS, SIS, CR, NBR, BR, tackifiers, adhesives and sealants; rubber threads and latex for carpet backing and foams,

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 44.09lb Bag

• 

  LOWINOX® WSP

  Non-staining phenolic antioxidant that gives excellent protection from heat aging degradation in a variety of elastomers and plastics.

  LOWINOX® WSP is a versatile non-staining, non-discoloring phenolic antioxidant that offers outstanding protection in elastomers and polymers. It has excellent heat aging resistance and can be used for products that will be steam sterilized. LOWINOX® WSP is easily dispersed for use in latex applications and offers good protection from degradation in the presence of copper contamination. Appearance: Fine, slightly dusting crystalline powder Melting Point: 132-137 °C Molecular Weight: 421 g/mol Bulk Density: 360 kg/m³ Compacted Bulk Density: 470-500 kg/m³ Broad food contact approvals Excellent resistance to heat aging Non-staining Non-discoloring Good protection from degradation resulting from copper contamination Disperses well Latex, parts with copper contamination, parts intended for steam sterilization

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 44.09 lb Box

• 

  Microthene® FA 700-00

  20 micron high density polyethylene powder with a melt index of 10.

  Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  NAUGARD® Q Drop

  Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers.

  NAUGARD® Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black such as tire carcasses and belts. Appearance: Amber drop Molecular Weight: 874 g/mol Specific Gravity (@ 25 °C): 1.06 Melting Point: 120-125 °C Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Bag

• 

  NAUGARD® RM51-S

  Blend of phosphite and phenolic antioxidants that is extremely effective at protecting natural and synthetic rubber from degradation as a result of exposure to heat, light, and oxygen.

  NAUGARD® RM51-S is a liquid form stabilizer blend for natural and synthetic rubber. It minimizes gel formation and is exceptionally effective at protecting against degradation resulting from heat, light, and oxygen exposure. NAUGARD® RM51-S is non-staining, non-discoloring, and stabilizes mooney viscosity in latex. Appearance: Clear gold to yellow viscous liquid Specific Gravity @ 25 °C: 0.98 Soluble: Most organic solvents Insoluble: Water Food contact approval Non-staining Non-discoloring Easily emulsified for latex applications Exceptional protection from degradation in natural and synthetic rubbers as a result of exposure to heat, light, and oxygen Minimizes gel formation during processing Dipped and extruded latex

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 425.48lb Drum

• 

  NAUGARD® Super Q

  Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers. Higher purity version of NAUGARD® Q.

  NAUGARD® Super Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black for specialty applications such as geomembranes and wire and cable compounds. Appearance: Amber to brown pastille Specific Gravity (@25 °C): 1.08 Color - Gardner: 11 Softening Point: 115-135 °C Flash Point (Open Cup): 274-282 °C Molecular Weight: 874 g/mol Soluble (@ 25 °C): Acetone, chloroform, ethanol, naphtha, toluene Insoluble (@ 25 °C): Water, petroleum ether Higher purity than NAUGARD® Q Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Box

• 

  NAUGAWHITE® Liquid

  Non-staining, non-discoloring liquid form antioxidant that protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure.

  NAUGAWHITE® Liquid is a rubber antioxidant that is easily emulsifiable for latex applications and will not stain fabrics, lacquers or other materials through migration or contact. It protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure. NAUGAWHITE® Liquid will not yellow when exposed to nitrogen dioxide. Appearance: Clear amber viscous liquid Specific Gravity: 0.96 Soluble: Most organic solvents Insoluble: Water Non-staining Non-discoloring Food contact approvals Does not yellow when exposed to nitrogen dioxide Latex foam, refrigerator gaskets, footwear, proofing, sundries, wire insulation such as SP-1 cord, automotive rubber and cloth backing compounds

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 418.87lb Drum

• 

  NAUGAWHITE® Powder

  Non-staining, non-discoloring powder form antioxidant that protects natural and synthetic rubber from degradation due to heat, light, and oxygen exposure.

  NAUGAWHITE® Powder is a rubber antioxidant suitable for natural and synthetic rubber, that protects against degradation due to heat, light, and oxygen exposure. It will not stain fabrics, lacquers or other materials through migration or contact. NAUGAWHITE® Powder will not yellow when exposed to nitrogen dioxide. Appearance: Tan powder, 70% active on an inert base carrier Specific Gravity: 1.19 Soluble: Most organic solvents Insoluble: Water Non-staining Non-discoloring Food contact approvals Does not yellow when exposed to nitrogen dioxide Latex foam, refrigerator gaskets, footwear, proofing, sundries, wire insulation such as SP-1 cord, automotive rubber and cloth backing compounds

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.11lb Carton

• 

  Pationic® 1240 Kosher

  Pationic® 1240 is a lactic acid with 19 - 20% calcium. It can be used as a catalyst residue neutralizer. This product is certified Kosher.

  Pationic® products offer diverse solutions for antistats, antifog, lubricants and mold releases. Calcium %: 19 - 20 pH (5% Solution): 11 min Sieve (40 Mesh Through) %: 98 min Calcium lactate-based additive Acid neutralizer

  Manufacturer: Corbion | Product Line: Pationic® Glycerol Esters | Package Sizes: 40lb Box

• 

  RETARDER ESEN®

  Antiscorch agent for natural and synthetic rubbers designed to greatly improve processing safety with minimal effect on cure rate.

  RETARDER ESEN® is surface treated phthalic anhydride antiscorch agent that can be used with natural and synthetic rubbers and a variety of thermoset polymers. It greatly improves processing safety, with minimal effect on time to reach optimum cure. It is relatively nondiscoloring and nonstaining. Appearance: White crystalline powder Specific Gravity: 1.53 Melting Point: 127-132 °C Flash Point: 132 °C Soluble: Alcohol, benzene, ethylene dichloride Moderately Soluble: Acetone Insoluble: Gasoline, water Relatively non-discoloring but will cause a creaming of white stock during light exposure Relatively non-staining Little to no effect on cure rate

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Box

• 

  SUNPROOF® EXTRA

  Antiozonant similar to SUNPROOF® SUPER with a lower melting point that prevents static ozone cracking under a wide range of weather conditions.

  SUNPROOF® EXTRA is a blend of hydrocarbon waxes that provides immediate and long term static ozone cracking protection for a wide range of weather conditions. SUNPROOF® EXTRA synergizes with FLEXZONE® to provide superior static protection with minimal impact to dynamic protection. Appearance: White pastille Specific Gravity @ 25 °C: 0.92 Melting Point: 64-69 °C Soluble: Benzene, n-hexane, gasoline Slightly Soluble: Ethylene dichloride Insoluble: Acetone, water Non-staining Non-discoloring Food contact approval Synergizes with FLEXZONE® to provide superior static protection Retreads, farm tires, and general mechanical goods made from natural rubber, SBR and polyisoprene

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Bag

• 

  SUNPROOF® IMPROVED

  Antiozonant similar to SUNPROOF® EXTRA with a lower melting point that prevents static ozone cracking under a wide range of weather conditions.

  SUNPROOF® EXTRA is a blend of hydrocarbon waxes that provides immediate and long term static ozone cracking protection for a wide range of weather conditions. SUNPROOF® EXTRA synergizes with FLEXZONE® to provide superior static protection with minimal impact to dynamic protection. Appearance: White pastille Specific Gravity @ 25 °C: 0.92 Melting Point: 61-66 °C Soluble: Benzene, n-hexane, gasoline Slightly Soluble: Ethylene dichloride Insoluble: Acetone, water Non-staining Non-discoloring Static antiozone cracking protection Food contact approvals Tire compounds, especially in white and black sidewall stocks; natural rubber, SBR, and butadiene rubber blends

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Bag

• 

  SUNPROOF® JR-FT

  Antiozonant similar to SUNPROOF® IMPROVED with a lower melting point that prevents static ozone cracking under a wide range of weather conditions.

  SUNPROOF® JR-FT is a blend of hydrocarbon waxes similar to SUNPROOF® IMPROVED with a lower melting point that provides immediate and long term static ozone cracking protection for a wide range of weather conditions. SUNPROOF® JR-FT synergizes with FLEXZONE® to provide superior static protection with minimal impact to dynamic protection. Appearance: White pastille Specific Gravity @ 25 °C: 0.91 Melting Point: 56-61 °C Soluble: Benzene, n-hexane, gasoline Slightly Soluble: Ethylene dichloride Insoluble: Acetone, water Non-staining Non-discoloring Food contact approval Synergizes with FLEXZONE® to provide superior static protection Retreads, farm tires, and general mechanical goods made from natural rubber, SBR and polyisoprene

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Box

• 

  SUNPROOF® SUPER

  Antiozonant that prevents static ozone cracking under a wide range of weather conditions.

  SUNPROOF® SUPER is a blend of hydrocarbon waxes that provides immediate and long term static ozone cracking protection for a wide range of weather conditions. SUNPROOF® SUPER synergizes with FLEXZONE® to provide superior static protection with minimal impact to dynamic protection. Appearance: Pale yellow pastille Specific gravity @ 25 °C: 0.92 Melting Range: 75-80 °C Soluble: Benzene, n-hexane, gasoline Slightly Soluble: Ethylene dichloride Insoluble: Acetone, water Non-staining Non-discoloring Food contact approval Synergizes with FLEXZONE® to provide superior static protection Retreads, farm tires, and general mechanical goods made from natural rubber, SBR and polyisoprene

  Manufacturer: SI Group | Product Line: Si Group Rubber Additives | Package Sizes: 55.115lb Bag

• 

  TraSys® 258

  Yields a long life release coating (3000+ cycles) for natural rubber parts, BR (Butadiene Rubber) parts and other polymers. Best release for Fluoropolymer parts.

  Exhibits outstanding release or anti stick properties with low friction. Appearance: White liquid Odor: alcohol-like Freezing Point: -89 Degrees C Volatile: 95% Partly H2O soluble Very clean and non-oily. Does not stain.

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 15.41kg Drum, 1gl Drum

• 

  TraSys® 817

  A very clean, nonoily, fluorochemical mold release coating for hot mold applications.

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing Point: 0°C Boiling Point: 100°C Ideal for touch-up for molds coating with TraSys® 158,158W, and 155 Already pre-diluted for an easy use

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems

• 

  TraSys® 825

  For elastomer compounds - offers a durable film on the mold surface which delivers multiple releases

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing point: 0°C Boiling point: 100°C Volatile: 94-98% Great for elastomer compounds with a desired controlled release Will produce a very durable film on the mold service Good for hot, clean, and dry surfaces

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 55gl Drum, 5gl Drum

• 

  TraSys® 9825

  Ideal for compression, transfer and injection molding of rubber compounds (great for polished surfaces)

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: bulk white liquid Density: 1.04 (H2O=1) VOCs: 1-20% Great for compression, transfer, and injection molding of rubber compounds Very clean and will not interfere with post-finishing operations

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 5gl Drum