132

This aluminum salt derived from distilled, hydrogenated fatty acids is designed for protective and decorative coatings. Has the highest free fatty acid content and lowest aluminum metal content.

This product has strong lubrication characteristics, thickening ability, thermal stability, and water-repellent characteristics. Total Ash: 5.50 – 7.50 Fineness % Thru 20 Mesh: 100.00 (Min) Fineness % Thru 200 Mesh: 90.00 – 100.00 Free Fatty Acids (As Stearic): 25.0 – 35.0 Water: 0.00 – 1.00 Water Soluble Salts: 0.00 – 1.00 Yields the lowest viscosity increase. Great for dry lubrication and thickening of ink manufacture. It is commonly used in the production of coatings(protective and decorative) such as paints, enamels, varnishes, and lacquers. additionally, it acts as a dry lubricant in metal processing and as a water repellents.

22, Powder

Neutralizer and lubricant in plastics & metal processing. It is protective of decorative coatings as well as lubricant in the manufacturing of pharmaceutical products.

This product has strong lubrication characteristics, thickening ability, thermal stability, and water-repellent characteristics. Total Ash % 9.00 – 11.50 Fineness % Thru 20 Mesh: 100.00 min Fineness % Thru 200 Mesh: 90.00 – 100.00 Fineness % Thru 40 Mesh: 99.80 – 100.00 Free Fatty Acids (As Stearic)%: 2.00 – 7.00 Water %: 0.00 – 1.00 Water Soluble Salts %: 0.00 – 1.00 Softening Temperature °C: 140.0 – 180.0 Appearance: Free Flowing White Powder White powder Insoluble in water

30

The aluminum salt of distilled, hydrogenated fatty acids.

This product has strong lubrication characteristics, thickening ability, thermal stability, and water-repellent characteristics. Appearance: white powder Melting Point: 160 °C Insoluble in H2O Great for protective and decorative coating preservation. Great for thickening of aromatic solvents in inks.

ACTICELL® U

Cost effective activator and accelerator for chemical blowing agents that lowers the decomposition temperature of CELOGEN® AZ and OT, allowing the manufacture of cellular goods at lower temperatures.

ACTICELL® U is a non-dusting activator and accelerator for CELOGEN® chemical blowing agents. It lowers the decomposition temperature of CELOGEN® AZ and OT, allowing cellular materials to be manufactured at lower temperatures. When used at the normal decomposition temperature for CELOGEN® AZ and OT, ACTICELL® U improves productivity in natural and synthetic rubbers. Appearance: Fine white powder Specific gravity: 1.34 Melting point: 129-134°C Soluble: Water (except for surface coating) Slightly soluble: Acetone Insoluble: Benzene, gasoline Cost effective activator and accelerator Non-dusting Disperses easily Lowers decomposition temperature of CELOGEN® AZ and OT Relatively non-staining and non-discoloring Recommended dosing: For butyl and crosslinked polyethylene use a dose rate equal to the CELOGEN® AZ or OT used For cellular natural rubber, SBR, NBR, chloroprene rubber use 50% of the CELOGEN® AZ dose For EPDM use 25% of the CELOGEN® AZ dose

ALKANOX™ 240 Granular

Low volatility phosphite antioxidant that effectively prevents processing-induced oxidative degradation in a wide variety of polymers.

ALKANOX™ 240 Granular effectively reduces peroxide induced oxidative degradation during processing in a wide variety of polymers. It's low volatility makes it effective even in high temperature processing. Particularly effective in Polyolefins, polycarbonate, ABS, and polyesters. Appearance: White, free-flowing powder Molecular Weight: 647 g/mol Bulk Density: 530 (kg/m3) Melting Point: 182-188 °C Prevents processing-induced degradation Effective at high temperatures Broad food-contact approvals Excellent hydrolytic stability Non-dusting

ALKANOX™ 240 Powder

Low volatility phosphite antioxidant that effectively prevents processing-induced oxidative degradation in a wide variety of polymers.

ALKANOX™ 240 Powder reduces peroxide induced oxidative degradation during processing in a wide variety of polymers. It's low volatility makes it effective even in high temperature processing. Particularly effective in Polyolefins, polycarbonate, ABS, and polyesters. Appearance: White, free-flowing powder Molecular Weight: 647 g/mol Bulk Density: 550 (kg/m3) Melting Point: 182-188 °C Prevents processing-induced degradation Effective at high temperatures Broad food-contact approvals Excellent hydrolytic stability

ANOX™ 1315

Low viscosity liquid phenolic antioxidant with some FDA approvals.

ANOX™ 1315 is a highly effective, non-discoloring, liquid antioxidant. It is ideal for a variety of polymers, engine and cutting lubricating oils, and polyols used in polyurethane foams for both storage and scorch protection. Appearance: Viscous, clear yellow liquid Melting Point: -56 °C Specificity Gravity (@ 20 °C): 0.94 g/cm³ Viscosity (@30 °C): ~200 mPa · s Flash Point: 229 °C Liquid form FDA approvals for use in specific polymers Low viscosity allows for extra easy handling High antioxidant efficiency in many different polymers including polyolefins, synthetic rubbers, PVC, polyols (PU) and lubricant oils

ANOX™ 20 Granular

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging. Similar to ANOX™ 20 Powder, but in granular form.

ANOX™ 20 Granular is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX™ 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 570 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

ANOX™ 20 Powder

High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.

ANOX™ 20 Powder is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX™ 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 650 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

ANOX™ 29

Phenolic antioxidant that protects against thermo-oxidative degradation during processing, storage and end-use in a wide variety of materials.

ANOX™ 29 is a sterically hindered phenolic antioxidant that is tremendously effective in a wide variety of materials at preventing thermo-oxidative degradation during processing, storage, and end-use. Synergizes with thioesters to offer enhanced thermal aging properties in polypropylene. Appearance: White to off-white, free flowing, crystalline powder Softening Point: 161 -164 °C Flash Point: > 193 °C Molecular Weight: 438.7 g/mol Bulk Density: 0.56 g/cm³ Synergizes with thioester antioxidants to enhance thermal aging properties in polypropylene Elastomers such as EPDM, SBS, and rubber blends with polyolefins, natural and synthetic tackifier resins, crystalline and high impact polystyrene, ABS terpolymer, waxes and oils

ANOX™ BB011 Granular

Synergistic blend of granular form phenolic and phosphite antioxidants to protect polymers both during processing and long term aging.

ANOX™ BB011 Granular is a solid, synergistic blend of equal parts phenolic (ANOX™ 20) and phosphite (ANOX™ 240) antioxidants. This binary blend provides excellent protection for polymers during both processing and long term aging. Appearance: White to off-white granules ALKANOX™ 240 Content: 47.5-52.5% ANOX™ 20 Content: 47.5-52.5% Clarity of Sol (10% w/v Toluene): Clear Tran. 425 nm (10% w/v Toluene): >=95.0% Tran 500 nm (10% w/v Toluene): >=97.0% Fewer additives to dose properly Non-dusting Low volatility allows for higher processing temperatures Excellent resistance to extraction from polymer compounds Used in a wide variety of thermoplastic polymers such as polyolefins, polycarbonates, ABS, and polyesters

ANOX™ BB011 Powder

Synergistic blend of powder form phenolic and phosphite antioxidants to protect polymers both during processing and long term aging.

ANOX™ BB011 Powder is a solid, synergistic blend of equal parts phenolic (ANOX® 20) and phosphite (ALKANOX® 240) antioxidants. This binary blend provides excellent protection for polymers during both processing and long term aging. Appearance: White to off-white powder ALKANOX® 240 Content: 47.5-52.5% ANOX® 20 Content: 47.5-52.5% Clarity of Sol (10% w/v Toluene): Clear Tran. 425 nm (10% w/v Toluene): >=95.0% Tran. 500 nm (10% w/v Toluene): >= 97.0% Fewer additives to dose properly Low volatility allows for higher processing temperatures Excellent resistance to extraction from polymer compounds Used in a wide variety of thermoplastic polymers such as polyolefins, polycarbonates, ABS, and polyesters

ANOX™ BB021

Synergistic blend of phenolic and phosphite antioxidants to protect polymers both during processing and long term aging.

ANOX™ BB021 Powder is a solid, synergistic blend of one part phenolic (ANOX® 20) to two parts phosphite (ALKANOX® 240) antioxidants. This binary blend provides excellent protection for polymers during both processing and long term aging. Appearance: White to off-white powder ALKANOX™ 240 Content: 64.2-69.2% ANOX™ 20 Content: 30.8-35.8% Clarity of Sol (10% w/v Toluene): Clear Tran. 425 nm (10% w/v Toluene): ≥95.0 Tran. 500 nm (10% w/v Toluene): ≥97.0 Fewer additives to dose properly Low volatility allows for higher processing temperatures Excellent resistance to extraction from polymer compounds Available in powder and granular forms Used in a wide variety of thermoplastic polymers such as polyolefins, polycarbonates, ABS, and polyesters

ANOX™ IC-14

Low volatility phenolic antioxidant with excellent resistance to extraction in polymers, provides outstanding protection against high temperature degradation.

ANOX™ IC-14 is a high molecular weight hindered phenolic antioxidant that provides outstanding protection from high temperature degradation during processing, as well as thermal stability for the lifetime of the product. It's low volatility results in excellent resistance to extraction in polymers. ANOX™ IC-14 is resistant to gas fading and is non-discoloring in polyolefins. It is ideal for injection molding applications that require high melt temperatures. Appearance: White, free-flowing powder or granules Melting Point: 218-219 °C Molecular Weight: 784 g/mol Bulk Density: 480 kg/m³ (powder), 580 kg/m³ (granular) Broad food-contact approvals Available in powder and granular form Polypropylene fiber and films

ANOX™ PP18 NDB

High molecular weight hindered phenolic antioxidant, provides effective protection against polymer degradation during processing and in long term aging in many polymer systems.

ANOX™ PP18 stabilizer effectively reduces oxidative degradation of most polymers during processing and end-use application. It is ideal for polyolefins, styrenics, block co-polymers, elastomers, adhesives, PVC, and polyurethanes. It is available in granular, powder, and non-dusting blend form. Appearance: White pellets Melting Point: 50-55 °C Flash Point: 273 °C Molecular Weight: 531 g/mol Non-dusting Broad food-contact approvals

ANOX™ PP18 Powder

High molecular weight hindered phenolic antioxidant, provides effective protection against polymer degradation during processing and in long term aging in many polymer systems.

ANOX™ PP18 stabilizer effectively reduces oxidative degradation of most polymers during processing and end-use application. It is ideal for polyolefins, styrenics, block co-polymers, elastomers, adhesives, PVC, and polyurethanes. It is available in granular, powder, and non-dusting blend form. Appearance: White, free flowing solid Melting Point: 50-55 °C Flash Point: 273 °C Molecular Weight: 531 g/mol Bulk Density: 570 kg/m³ Available in multiple forms (powder, granular, non-dusting blend) Broad food-contact approvals

Armoslip 18 LF Beads

Armoslip 18 LF beads are stearamides with typical usage in caps and closures or in rubbers and inks

These fatty amides provide a range of plastic additives, wax additives and lubricants to various plastics applications Free Fatty Acid .05% Max (as Stearic Acid) Assay 98.5% Min Moisture 0.1% Max Iodine value (g I₂/100 g): 3 max Melting point: 99-109°C Excellent anti-blocking activity Facilitates over-printing and wet-printing Water soluble

Armoslip E, Beads

Armoslip E beads are formulated from refined rapeseed oil and offers excellent slip effects and provides good anti-blocking performance

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Assay 98.5% Min Free Fatty Acid Content 0.2% Max Moisture 0.05% Max Iodine Value 74 Min 79 Max (g I₂/100 g Melting point 80-84°C Rapeseed oil based Low volatility and high temperature stability

Armoslip® CP - Beads

Armoslip® CP is formulated from refined oleamides and provides excellent slip effect and has a moderate performance when used for anti-blocking

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Iodine Value 84 Moisture .25% Max Amide 98% Min Bead form allows for easy transportation Insoluble in water

BHT

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including crystalline.

Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

BHT, Free Flow

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including free-flowing spherical particles.

Sasol's Butylated Hydroxy Toluene (BHT) is a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

BIK™ OT

Activator for blowing agents and accelerators that lowers the decomposition temperature of AZ type blowing agents.

BIK™ OT is a surface treated urea used as an activator for thiazole, thiuram and dithiocarbamate accelerators. It is an efffective promoter for Celogen AZ type blowing agents in SBR, butyl, EPDM, and neoprene and natural rubbers. Appearance: Fine white powder Specific Gravity: 1.31 Melting Point: 129-134 °C Soluble: Water (except for surface coating) Insoluble: Benzene, gasoline Reduces odor when used with nitrosamine-type blowing agents Promoter for AZ-type blowing agents in NR, SBR, IR, EPDM and CR rubbers Lowers the decomposition temperature of AZ-type blowing agents in cellular products Activator for thiuram, thiazole, and dithiocarbamate accelerators Relatively nonstaining Relatively nondiscoloring

BroShield 21-B

General Purpose Brominated Flame Retardant

BroShield 21-B is a highly effective general purpose flame retardant for use in thermoplastics, engineering polymers, elastomers, thermosets, HIPS, polypropylene, EPDM , polyesters and epoxy. Appearance: White Powder Bromine Content: 81-82% Melt range (deg C): 348-353 Excellent Color Good UV stability High FR efficiency High thermal stability Non blooming RoHS compliant Elastomers Thermoplastics Engineered Polymers

C-1

Sodium stearate is a sodium salt of distilled hydrogenated fatty acids.

Sodium Stearate C-1 can be used in the wetting, thickening, emulsification, and opacification of creams, lotions, and shampoos. Custom mix of fatty acids, also seen used in deodorant sticks. Free fatty acids (as Stearic): 0.20-1.30 GLC-C16: 50.0-57.0 GLC-C18: 37.5-45.5 Water: 0.00-3.00 Fineness % thru 100 mesh: 30.0-100.0 FSC test: clear Unreacted caustic: pass Appearance, white powder: pass (visual) High solubility in hot polar solvents Soluble in hot mineral oils and waxes Forms gel upon cooling Available in powder form Sodium Stearate C-1 can be used in the wetting, thickening, emulsification, and opacification of creams, lotions, and shampoos.

C-7

Sodium Stearate is a sodium salt of distilled hydrogenated fatty acids.

Sodium Stearate C-7 can be used in the wetting, thickening, emulsification, and opacification of creams, lotions, and shampoos. May also be used for gelling agents in gel sticks. Free fatty acids (as Stearic): 0.20-1.30 GLC-C12: 0.00-0.75 GLC-C14: 0.00-3.00 GLC-C16: 23.0-30.0 GLC-C18: 35.0-40.0 GLC-C20: 17.00-24.00 GLC-C22: 12.00-16.00 GLC-C20 + C22: 30.00-40.00 GLC-Other: 0.00-4.00 Gel color and sediment: 0-150 Water: 0.00-3.00 Fineness % thru 100 mesh: 50.0-100.0 FSC test: clear Appearance, white powder: pass (visual) High solubility in hot polar solvents Soluble in hot mineral oils and waxes Forms gel upon cooling Low odor Available in powder form 100% vegetable based

CELOGEN® OB

Outstanding chemical foaming agent with a relatively low decomposition temperature for producing cellular rubber and expanded plastic.

CELOGEN® OB is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively low decomposition temperature and small particle size. CELOGEN® OB is treated with a small amount of Calcium Stearate to enhance flow ability. CELOGEN® OB can be catalyzed by a variety of chemicals. Very strong activators include ACTICELL® U, triethanolamine, and peroxides. Calcium oxide, calcium stearate, stearic acid, cadmium and lead type vinyl stabilizers are all moderate activators. Adipic acid, benzoic acid, salicylic acid, citric acid, lead stearate and zinc stearate are examples of weak activators. Molecular Weight: 358 Gas Content: Mostly nitrogen Appearance: White powder Purity: 93.0% min Average Particle Size: 5-7 µm Moisture Content: 0.5% max Decomposition Point.: 158~164°C Gas Yield: 125~140 ml/g @ S.T.P. pH: 6-8 Soluble: Dimethyl sulfoxide and dimethylformamide Insoluble: Benzene, water Non-staining Non-discoloring Non-toxic Odorless Evolves ammonia-free gas Does not effect cure rate of rubber Does not effect PVC stability Phenolic resins, thermoplastic rubber, Epoxy, NBR-PVC blends for cellular cable insulation

CELOGEN® OT

Outstanding chemical foaming agent with a relatively low decomposition temperature for producing cellular rubber and expanded plastic. Similar to CELOGEN® OB, but it has been oil treated to reduce dusting.

CELOGEN® OT is a chemical foaming agent that produces a fine, uniform, closed cell structure. It has a relatively low decomposition temperature and small particle size. CELOGEN® OT can be catalyzed by a variety of chemicals. Very strong activators include ACTICELL® U, triethanolamine, and peroxides. Calcium oxide, calcium stearate, stearic acid, cadmium and lead type vinyl stabilizers are all moderate activators. Adipic acid, benzoic acid, salicylic acid, citric acid, lead stearate and zinc stearate are examples of weak activators. Molecular Weight: 358 Gas Content: Mostly nitrogen Appearance: White powder Purity: 93.0% min Average Particle Size: 5-15 µm Heat Loss: 0.5% max Decomposition Point: 158-164 °C Gas Yield: 125-140 ml/g @ S.T.P. pH: 6-8 Soluble: Dimethyl sulfoxide and dimethylformamide Insoluble: Benzene and water Non-staining Non-discoloring Non-toxic Odorless Evolves ammonia-free gas Does not effect cure rate of rubber Does not effect PVC stability Low dusting Phenolic resins, thermoplastic rubber, NBR-PVC blends for cellular cable insulation

Eastman DTBHQ Crystalline

Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).

Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.

Eastman MTBHQ Dry

Secondary inhibitor (co-inhibitor) and antioxidant for nonfood fats and oils.

Eastman™ MTBHQ (mono t-butyl hydroquinone) is commonly used as a polymerization inhibitor and antioxidant in many industrial applications. Effective in higher temperatures due to its higher solubility and potency compared to unsubstituted hydroquinone. Appearance: Light tan solid Flash point: 171°C (340°F) Boiling point: 295°C (563°F) Melting point: 125°C (257°F) Specific gravity 20°C/20°C: 1.05 Molecular weight: 166.22 CAS: 1948-33-0 Very effective polymerization inhibitor Good performing antioxidant in unstable organic liquids Excellent performance as a heat and stabilizer for pressure-sensitiveness adhesives Used as a polymerization inhibitor and industrial antioxidant in many applications.

Eastman™ THQ Toluhydroquinone

Highly effective process inhibitor used in the production of highly reactive unsaturated polyesters.

Eastman™ THQ (Toluhydroquinone) is a tan to white crystalline solid that goes through similar chemical reactions as Hydroquinone. However, due to the presence of a methyl group in the ortho position, THQ becomes a highly active inhibitor in the free radical polymerization of vinyl monomers and unsaturated polyesters. Appearance: Off-white solid Flash point: 172°C (342°F) Boiling point: 279°C (534°F) Melting point: 127°C (261°F) Specific gravity: 1.3 Molecular weight: 124.13 CAS: 95-71-6 Better solubility in styrene than Hydroquinone Highly effective cook stabilizer in unsaturated polyesters Good performing antioxidant for oleates, linseed oil, and other nonfood fats and oils Used as an inhibitor, antioxidant, and intermediate manufacturing.

Epolene® C-10 Polymer

Epolene® C-10 is a low density polyethylene homopolymer with medium molecular weight and low color for use in adhesives, coatings and polymer compounding.

Epolene® C-10 is a branched LDPE polymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 35,000. Polymer Type: LDPE Molecular Weight: 35,000 Mettler Softening Point: 101°C (ASTM D6090) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 18,600 cP @ 125°C 3,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat stability Hot melt adhesives, packaging, automotive coatings, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-13 Polymer

Epolene® C-13 is a low density polyethylene with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

Epolene® C-13 is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000. Polymer Type: LDPE Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

Epolene® C-13P Polymer

Epolene® C-13P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

Epolene® C-13P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000 and is the powder form of Epolene® C-13 Polymer Type: LDPE Product Form: Powder Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

Epolene® C-15 Polymer

Epolene® C-15 is a low density polyethylene polymer with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15 is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in pellet form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-15P Polymer

Epolene® C-15P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in powder form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-16 Polymer

Epolene® C-16 is a maleic anhydride modified, low density polyethylene polymer for use in adhesives, coatings, and color concentrates.

Epolene® C-16 is a branched LDPE homopolymer with maleic anhydrire that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It is well suited for applications requiring compatibility with polyamide. The maleic anhydride modification allows for improved adhesion and improved aging properties in hot melt adhesive formulations. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-16 has a molecular weight of 26,000 and is provided in pellet form. Polymer Type: Ma-PE Molecular Weight: 26,000 Ring and Ball Softening Point: 102°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 2,850 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Improved adhesion High filler tolerance Superior aging properties Color concentrates, automotive, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-16P Polymer

Epolene® C-16P is a maleic anhydride modified, low density polyethylene powder for use in adhesives, coatings, and color concentrates.

Epolene® C-16P is a branched LDPE homopolymer with maleic anhydride that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It is well suited for applications requiring compatibility with polyamide. The maleic anhydride modification allows for improved adhesion and improved aging properties in hot melt adhesive formulations. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-16P has a molecular weight of 26,000 and is provided in powder form. Polymer Type: Ma-PE Molecular Weight: 26,000 Ring and Ball Softening Point: 102°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 2,850 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Improved adhesion High filler tolerance Superior aging properties Color concentrates, automotive, wax modification, building & construction coatings, solvent-based adhesives

Epolene® C-17 Polymer

Epolene® C-17 is a low density polyethylene wax with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17 is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17 has a molecular weight of 100,000 and is provided in pellet form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® C-17P Polymer

Epolene® C-17P is a low density polyethylene wax powder with a high melt point and viscosity for use in wax blends, adhesives and color concentrates.

Epolene® C-17P is a branched LDPE homopolymer that can be used as a base polymer in concentrate dispersions and adhesives and to modify paraffin wax blends. It has a relatively high melt point and viscosity compared to other C-type Epolene products. Epolene® C-17P has a molecular weight of 100,000 and is provided in powder form. Polymer Type: PE Molecular Weight: 100,000 Ring and Ball Softening Point: 133°C (ASTM E 28) Penetration Hardness: 2 dmm (ASTM D5) Viscosity, Brookfield: MI=19 @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Excellent compatibility with tackifying resins automotive, paraffin wax modification, solvent-based adhesives, color concentrates

Epolene® C-18 Polymer

Epolene® C-18 is a low density polyethylene wax modified with maleic anhydride for use in coatings, adhesives and color concentrates.

Epolene® C-18 is a branched LDPE homopolymer modified with maleic anhydride that can be used as a base polymer in concentrate dispersions, coatings and adhesives. It is well suited for applications requiring polyamide compatibility and offers high gloss and good heat seal ability. Epolene® C-18 has a molecular weight of 15,000 and is provided in pellet form. Polymer Type: PE Molecular Weight: 15,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,550 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Low color Maleic anhydride grafted automotive, wax coatings, color concentrates

Epolene® C-26 Polymer

Epolene® C-26 is a maleic anhydride grafted polyethylene coupling agent for use in automotive, building and construction and rubber and plastic modification.

Epolene® C-26 is a maleic anhydride grafted polyethylene coupling agent for polyolefin composites. Its molecular weight and polar functionality provide optimal, balanced attraction between polyolefins and fillers, such as wood, glass and metals. Epolene® C-26 has a molecular weight of 65,000 and is supplied in pellet form. Polymer Type: Ma-PE Molecular Weight: 65,000 Mettle Softening Point: 120°C Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: MI=8 @ 190°C Maleic anhydride grafted Coupling aid for PE composites Balanced attraction between polar and non-polar components Automotive, rubber and plastic modification

Epolene® E-14 Polymer

Epolene® E-14 is a low-density oxidized polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14 is an oxidized polyethylene wax with low density and low molecular weight. It can be used in color concentrates and as a lubricant in processing rigid and flexible PVC. It is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. Epolene® E-14 has a molecular weight of 4,000 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 4,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 375 cP @ 125°C Good slip resistance High durability Produces stable emulsions NSF listed in PVC melt processes Automotive, Automotive OEM, Pressure sensitive adhesives, wax modification, PVC melt processing

Epolene® E-14E Polymer

Epolene® E-14E is a low-density, low molecular weight oxidized polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14E is an oxidized polyethylene wax with low density and low softening point. It produces stable, low color emulsions by both atmospheric and pressure methods. Epolene® E-14E has a molecular weight of 3,600 and is supplied in pellet form. Polymer Type: Ox-PE Molecular Weight: 3,600 Mettle Softening Point: 101°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Good slip resistance High durability & toughness Produces stable emulsions Automotive refinish, Pressure sensitive adhesives, wax modification, floor finishes

Epolene® E-14P Polymer

Epolene® E-14P is a low-density oxidized polyethylene powder for use in adhesives, coatings, plastics and wax blends.

Epolene® E-14P is an oxidized polyethylene wax with low density and low molecular weight. It can be used in color concentrates and as a lubricant in processing rigid and flexible PVC. It is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. Epolene® E-14P has a molecular weight of 4,000 and is supplied in powder form. Polymer Type: Ox-PE Molecular Weight: 4,000 Mettle Softening Point: 104°C (ASTM D 6090) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 375 cP @ 125°C Good slip resistance High durability Produces stable emulsions NSF listed in PVC melt processes Automotive, Automotive OEM, Pressure sensitive adhesives, wax modification, PVC melt processing

Epolene® E-20 Polymer

Epolene® E-20 is a medium-density low molecular weight polyethylene pellet for use in adhesives, coatings, plastics and wax blends.

Epolene® E-20 is an oxidized polyethylene wax with medium density and low molecular weight. It has low color, high hardness and a low softening point. Epolene® E-20 has a molecular weight of 7,500 and is supplied in pellet form. Epolene® E-20 is a great extrusion lubricant for fractional melt HDPE. Polymer Type: Ox-PE Molecular Weight: 7,500 Mettler Softening Point: 111°C (ASTM E 28) Penetration Hardness: <1 dmm (ASTM D5) Viscosity, Brookfield: 1,500 cP @ 125°C High hardness Low color Grease resistance High durability Imparts slip High gloss Improved dispersion High Lubricity Automotive, Pressure sensitive adhesives, wax modification

Epolene® N-10 Polymer

A polyethylene homopolymer with a viscosity of 1500

N-10 is a polyethylene polymer with a viscosity of 1500 cP that is easily blended with natural or synthetic waxes to enhance properties like tensile strength of wax blends, aid in pigment dispersion, mold release, improve gloss of paper and increase scuff and rub off resistance in printing inks. Polymer Type: Polyethylene Ring and Ball softening Point: 108C Penetration Hardness: 2dmm Viscosity, Brookfield @125C: 1,500 cP Molecular Weigght: 10,000 Increased tensile strength of wax blends Easily blend with natural or synthetic waxes Improve the gloss of paper coatings Aid in pigment dispersion and mold release Improve scuff and rub off resistance in printing inks solvent based adhesives, wax modification, inks, building and construction, packaging

ETHANOX™ 330 Granular

High molecular weight phenolic antioxidant ideal for a wide variety of applications including elastomers, PE wire insulation, hot melt adhesives, tackifiers and engineering polymers. Similar to ETHANOX™ 330 Powder, but in a granular form.

ETHANOX™ 330 exhibits superior performance over typical high molecular weight antioxidants in controlling degradation in polyolefins during processing. It is compatible with a wide variety of resins and most polymer additives. ETHANOX™ 330 is stable at high temperatures, and is electrically neutral, making it a particularly effective antioxidant for PE wire insulation. Appearance: White crystalline powder Melting Point: 244 °C Molecular Weight: 775 g/mol Bulk Density: 630 kg/m³ Broad food-contact approvals Resistant to water and solvent extraction Decreases water carry-over in water-quenched PP films Not absorbed by the fillers commonly used in polyolefins Low volatility Biologically inert Non-staining and non-discoloring Electrically neutral LDPE and HDPE wire insulation, hot melt adhesives

ETHANOX™ 330 Powder

High molecular weight phenolic antioxidant ideal for a wide variety of applications including elastomers, PE wire insulation, hot melt adhesives, tackifiers and engineering polymers. Similar to ETHANOX™ 330 Granular, but in a powder form.

ETHANOX™ 330 exhibits superior performance over typical high molecular weight antioxidants in controlling degradation in polyolefins during processing. It is compatible with a wide variety of resins and most polymer additives. ETHANOX™ 330 is stable at high temperatures, and is electrically neutral, making it a particularly effective antioxidant for PE wire insulation. Appearance: White crystalline powder Melting Point: 244 °C Molecular Weight: 775 g/mol Bulk Density: 630 kg/m³ Broad food-contact approvals Resistant to water and solvent extraction Decreases water carry-over in water-quenched PP films Not absorbed by the fillers commonly used in polyolefins Low volatility Biologically inert Non-staining and non-discoloring Electrically neutral LDPE and HDPE wire insulation, hot melt adhesives

FG

This stearate's grade is a fine grind and fused.

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. APPEARANCE: WHITE POWDER FINENESS - THRU 200 MESH %: 95.0-100.0 FREE FATTY ACIDS (AS STEARIC) %: 0.0-0.5 TOTAL ASH %: 11.0-12.0 WATER %: 0.0-3.2 Great for PVC formulations, polypropylenes, and polyolefins.

FireBlend® 25-X

Antimony based flame retardant synergist

FireBlend 25-X is a low cost alternative to antimony trioxide. It acts as an effective synergist in PVC, Polyolefins and ABS when used in combination with a halogen source. Appearance: Fine white powder Antimony content: 25% Average particle size: 1 to 2 microns Specific gravity: 3.48 325 mesh sieve residue: ≤0.20% Low cost Uniform particle size 1:1 replacement for antimony oxide PVC Polyolefins

FireGard® ATO

Flame Retardant/Synergist used in conjunction with brominated or Chlorinated compounds to reduce flammability.

FireGard ATO is Antimony Trioxide that is used as a fire retardant in the presence of a halogen source. In PVC compounds it can be used as the primary FR without the need for a halogen based flame retardant. In other polymers that do not contain halogen, a chlorinated or brominated compound must be added to obtain flame retardancy. Antimony Trioxide (ATO) does not melt or vaporize during normal use and will not form vapors unless heated to extremely high temperatures. FireGard ATO is suitable for applications where a high tint is acceptable. Appearance: Fine white powder Specific gravity: 5.5 Average particle size: 0.8 to 1.3 microns Sieve residue < 325 mesh: ≤0.10% Antimony Trioxide: 99.8% min Arsenic: 0.10% max Lead: 0.10% max Iron: 0.004% max Low cost Low impurities Fine particle size Coatings Adhesives Ceramics Catalyst for PET manufacture Frictional additive in automotive brake linings Clarifier for glass Opacifier for enamels Coating for titanium dioxide

FireGard® HP

High Purity grade of Antimony Trioxide (ATO)

FireGard HP is a high purity grade of Antimony Trioxide that has lower impurities compared to FireGard ATO. FireGard HP has lower levels of Lead & Arsenic compared to FireGard ATO thereby making it the FR of choice for critical applications like ceramic pigment and glass. Appearance: Fine white powder Specific gravity: 5.5 Average particle size: 0.8 to 1.3 microns Sieve residue < 325 mesh: ≤0.10% Antimony Trioxide: 99.8% min Arsenic: 0.05% max Lead: 0.05% max Iron: 0.004% max Low cost Low impurities Fine particle size Coatings Adhesives Ceramics Catalyst for PET manufacture Frictional additive in automotive brake linings Clarifier for glass Opacifier for enamels Coating for titanium dioxide

FN Powder

A fused stearate derived from hydrogenated fatty acids. Used as a catalyst neutralizer in polypropylenes.

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. Total Ash: 9.30 – 11.50 Fineness, % Thru 325 Mesh: 85.00 – 100.00 Free Fatty Acids: 0.00 – 1.00 Water %: 0.00 – 3.50 Appearance: White Powder Catalyst neutralizer Lubrication in polypropylene's Anti-static agent and acid scavenger in PVC Calcium Stearate FN Powder is a wide variety of applications ranging from waterproofing/ water repelling fabric, stops caking in dehydrated vegetables, as well as a stabilizer in PVC production.

FN VEG, Powder

Vegetable source. This food grade carboxylate is derived from hydrogenated fatty acids and is used as a catalyst neutralizer.

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. White powder Insoluble in water Flash point: 176° C Melting point 160° C Insoluble in water Lubricant Mold releasing agent Anti-caking agent FINENESS - THRU 200 MESH %: 99.00 FINENESS - THRU 40 MESH %: 100.00 FREE FATTY ACIDS (AS STEARIC) %: 0.00-2.00 HEAVY METALS %: 0.0-10.0 TOTAL ASH %: 9.00-10.50 USP TEST ARSENIC ppm: 0.0-1.5 WATER %: 0.0-4.00

FP

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. White powder Melting point: 160° C Flash point 349° C\ No soluble in water High Heat Stability Low Impurity Reduces Melt Viscosity

GENOX™ EP

High performance, cost-effective melt process stabilizer for polyolefins and other polymers.

GENOX™ EP is a high performance melt process stabilizer for use in polyolefins and other polymer systems. It is very effective even when used without a phenolic antioxidant and provides excellent gas-fading performance. Appearance: Free-flowing white to off-white powder Molecular Weight: 613 g/mol Melting Point: 90 °C Assay: 92% minimum Color (2g / 50 ml isopropyl alcohol solution): 80 APHA max Bulk Density (@20 °C): 0.54-0.56 g/cm³ Cost effective, high performance stabilizer for melt phase Very effective without the assistance of phenolic antioxidants Excellent gas fading performance Raw materials derived from vegetable sources Food contact approval Solid form

HEUCOTINT™ WU 10002

HEUCOTINT™ WU 10002 s a titanium dioxide pigment used in a universal tinting system.

Heucotint™ offers a variety of colorants that are VOC-free, APE-free and formadehyde free. This system of colorants offer the ease and consistancy at point-of-sale transactions. Appearance: White Liquid pH (ISO 787-9): 7.5 - 9.0 Specific Gravity (lbs/gal) (TMG-003) : 2.08 Grind (Hegman): 6.0 min. Wt. per Gal (lbs/gal): 16.8 - 17.8 Viscosity (Ku`s): 80.0 - 100.0 VOC (g/l): 0.0"

Hydroquinone Industrial Photographic

Primary inhibitor, lowest cost, most commonly used general-purpose inhibitor, antioxidant, and intermediate.

Eastman™ Hydroquinone Photographic is an industrial antioxidant that reacts quickly with oxygen. Along with being used as a primary inhibitor, it is also used as an intermediate to manufacture other antioxidants. Appearance: White crystals Flash point: 177°C (350°F) Boiling point: 286°C (547°F) Density @ 4°C: 1.34 g/mL Molecular weight: 110.11 CAS: 123-31-9 Low cost Effective stand-alone oxygen scavenger Reduces corrosion in water treatment applications as a catalyst Does not degrade to ammonia Reacts quickly to oxygen Used as a primary inhibitor to prevent oxidation and industrial applications.

Hystrene® 5522 Flake

Hystrene® 5522 has an arachidic/behenic acid content of approximately 55% and is commercially available as a flake. Other major components include palmitic and stearic acids.

Hystrene® saturated and unsaturated fatty acids have excellent oxidative and thermal stability which makes them useful in countless sensitive applications. Acid Number: 178 - 185 Gardner Color: 0 - 3 Iodine Value: 0 - 4 Titer: 60 - 63 °C Unsaponifiables: 0 - 1.5 Water: 0 - 0.20 Appearance: white flakes, molten Melting point: 58-65 °C / 135-150 °F Boiling point: >250 °C / >482 °F Flash point: 204 °C / 399 °F Water solubility: insoluble VOC content: 0 Long-chain fatty acid Used for paper coating, plastics, textile auxiliary, cosmetic, and lubricant industries.

Impruvol 20

Butylated Hydroxy Toluene is a non-staining, hindered phenolic antioxidant commonly used in a wide variety of applications including plastics, elastomers, petroleum products, and food. Available in several physical forms, including molten.

Sasol's Impruvol 20 is a molten form of Butylated Hydroxy Toluene (BHT), a food grade, low molecular weight, hindered phenolic antioxidant that reduces degradation initiated by heat, light, and time in organic materials. BHT is the most prevalent and approved antioxidant in the world. Appearance: White crystal Specific Gravity @ 60 °F: 1.01 Flash Point (Closed Cup): 245 °F Bulk Density: 37.5 lb/ft³ Purity: 99% minimum Freezing Point: 156.56 °F Color, Molten (APHA): 50 maximum Ash, Residue on Ignition: 0.002% maximum Arsenic: 3 ppm Heavy Metals as Lead: 10 ppm Molecular Weight: 220.34 g/mol Soluble: Methyl alcohol, isopropyl alcohol, ethyl alcohol, benzene, methyl ethyl ketone, petroleum ether, mineral oil, linseed oil, lard Insoluble: Sodium hydroxide, water Food grade Kosher and Halal certified Polyols, polybutylene, hydrocarbon resins, block copolymer elastomers, industrial fats, fatty acids, transmission fluids, lard, shortening, tallow, animal feeds, vegetable oils

Industrene® 206

Similar to 106 however has a wider color spec

Industrene® saturated and unsaturated fatty acids are high-quality fatty acids obtained from animal fat and vegetable oils. Acid Number: 199 - 204 Gardner Color (1963): 0 - 3 Iodine Value: 85 - 95 Sap Value: 198 - 205 Titer: 0 - 6 Unsaponifiables: 0 - 1 Water: 0 - 0.25 Low titer oleic High-quality Used for alkyd resins, rubber, mineral-flotation, adjuvants, foam depressants, caulking compounds, lubricants, buffing polishes, metallic soaps, abrasives, metal treating compounds, candles, crayons, emulsifiers, etc.

Industrene® 226 - FG Kosher

Industrene® 226 Food Grade distilled soy fatty acid

Industrene® saturated and unsaturated fatty acids are high-quality fatty acids obtained from animal fat and vegetable oils. Acid Number: 195 – 203 Titer: 0–26 °C Gardner Color (1963:) 0 – 3 Unsaponifiables: 0 – 2 Iodine Value: 127 – 138 Water: 0–0.3 Melting point: 25 °C / 77 °F Boiling point: 260 °C / 500 °F Flash point: 174 °C / 345 °F Density: 0.88 g/cm3 @ 25 °C Water solubility: insoluble VOC content: 0 Kosher Used for alkyd resins, rubber, mineral-flotation, adjuvants, foam depressants, caulking compounds, lubricants, buffing polishes, metallic soaps, abrasives, metal treating compounds, candles, crayons, emulsifiers, etc.

iso-Pentane 95 Tech

A technical grade hydrocarbon that is highly recommended for use in industrial and polymer processing applications.

Color: <5 Density: 624 Distillation Range: 27-29 Evaporation Rate: <1.0 Refractive Index: 1.354 Aromatic Content: <0.001 Non-volatile Matter: <2 Flash Point: -20°C Vapor Pressure: 56.9 Kinetic Viscosity: 0.35

Kemamide® B, Bead

Kemamide® B (Bead) is a saturated fatty monoamide formulated from a mixture of behenic acid and arachidic and is most commonly used for its anti-block properties

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 - 4.00 Amide Content: 95.0 - 100.0% Gardner Color: 0.0 - 4.0 Iodine Value: 0.0 - 4.0 Closed Tube Melt Point: 98.0 - 106.0 °C Water Content: 0.00 - 0.25% Appearance: White bead Flash Point (COC): 257 °C Density @ 130 °C: 0.807 g/mL Density @ 160 °C: 0.843 Viscosity @ 130 °C: 6.5 cP Heat of Fusion: 12.7 kcal/mol Fire Point (COC): 284 °C Food contact approved Bead form allows for easy transport Mar-resistant agents, textile softeners and water-repellents,

Kemamide® B, Powder

Kemamide® B (Powder) is a saturated fatty monoamide formulated from a mixture of arahidic and behenic acid and is commonly used for its anti-block properties or as a blending agent

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide: 95.0% Min 100.0% Max Iodine Value 0.0 Min 4.0 Max Melt Point 98.0 - 106.0 Powder form Approved for food contact Insoluble in water

Kemamide® E Ultra, Bead

Formulated from unsaturated fatty primary monoamide from vegetable sources and demonstrates excellent color stability

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide 98% Gardner Color: 1 Closed Tube Melt Point: 82 °C Water: 0.05% Does not contain Phthalates or BPA Available in bags, drums, and bulk sacks

Kemamide® E Ultra, Pellets

Formulated from unsaturated fatty primary monoamide from vegetable sources and demonstrates excellent color stability

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide 98% Gardner Color: 1 Closed Tube Melt Point: 82 °C Water: 0.05% Does not contain Phthalates or BPA Available in bags, drums, and bulk sacks

Kemamide® E Ultra, Powder

Formulated from unsaturated fatty primary monoamide from vegetable sources and demonstrates excellent color stability

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide 98% Gardner Color: 1 Closed Tube Melt Point: 82 °C Water: 0.05% Does not contain Phthalates or BPA Available in bags, drums, and bulk sacks

Kemamide® E-180, Powder

Fatty amide used in thermoplastic resins that imparts slip and anti-block characteristics

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 0.60 Total Amine Value: 0.00 – 10.00 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 41.0 – 47.0 Closed Tube Melt Point: 72.0 – 75.0 Water %: 0.00 – 0.25

Kemamide® E-60, Powder

This fatty amide is formulated from vegetable sourced erucic acid and is a unsaturated fatty primary monoamide. Micronized Powder form

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Free Fatty Acid: (Oleic) 0.0 – 0.5 Gardner Color (1963): 0.0 – 3.0 Amide: 98.0 – 100.0 Fineness % Thru 40 Mesh: 100.0 min Fineness % On 60 Mesh: 0.0 – 10.0 GLC-C22:1 (Erucic Content): 80.0 – 86.0 Closed Tube Melt Point °C: 76.0 – 86.0 Water: 0.00 – 0.20 Available in bead, molten, and pellet forms as well Excellent choice of additive when needing good slip and anti-block properties Insoluble in water

Kemamide® EBS

This product is a wax that benefits calendering processes, injection and blow molding, and extrusion processing

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0- 7.0 Neutralization Equivalent: 0.0 – 2.0 Total Amine Value: 0.0 – 2.0 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 146.0 Water %: 0.00 – 0.20 Free Fatty Acids %: 0.0 – 3.0 % thru 20 Mesh: 99.0 – 100 % on 40 Mesh (Prill only): 0 – 2 Balanced non-polar and polar properties Operates as a high functioning internal and external lubricant

Kemamide® EBS PR

Same as EBS, except in prill form

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Neutralization Equivalent: 0.0 – 2.0 Total Amine Value: 0.0 – 2.0 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 146.0 Water %: 0.00 – 0.20 Free Fatty Acids %: 0.0 – 3.0 % thru 20 Mesh: 99.0 – 100 % on 40 Mesh (Prill only): 0 – 2 Balanced non-polar and polar properties Operates as a high functioning internal and external lubricant

Kemamide® EZ, Bead

Triple distilled version of Kemamide® E Ultra, also available in pellet and powder form

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Gardner Color: 0.0 – 2.0 Water: 0.00 – 0.25 Closed Tube Melt Point °C: 76.0 – 86.0 Amide: 98.0 – 100.0 FDA approved for use in adhesives, can end cements, paper and paperboard in contact with dry foods, and several other areas

Kemamide® EZ, Pellets

Triple distilled version Kemamide® E Ultra, also available in bead and powder form

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Gardner Color: 0.0 – 2.0 Water: 0.00 – 0.25 Closed Tube Melt Point °C: 76.0 – 86.0 Amide: 98.0 – 100.0 FDA approved for use in adhesives, can end cements, paper and paperboard in contact with dry foods, and several other areas

Kemamide® EZ, Powder

Triple distilled version of Kemamide® E Ultra, also available in bead and pellet form.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Gardner Color: 0.0 – 2.0 Water: 0.00 – 0.25 Closed Tube Melt Point °C: 76.0 – 86.0 Amide: 98.0 – 100.0 FDA approved for use in adhesives, can end cements, paper and paperboard in contact with dry foods, and several other areas

Kemamide® OR, Bead

Oleamide which offers faster blooming in lower temperatures. Also available in powder form.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide % 98.0: – 100.0 Closed Tube Melt Point °C: 70.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 95.0 Water %: 0.00 – 0.20 Effective fast-bloom slip agent and as a mold release lubricant

Kemamide® S, Bead

Formulated from Stearic Acid, this product is a saturated fatty primary monoamide and is most commonly used for its anti-block properties.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

Kemamide® S, Powder

Same as Kemamide® S Bead, in powder form.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

Kemamide® U, Pastilles

Formulated from Oleic Acid, Kemamide® U is an unsaturated fatty monoamide and is commonly used for its slip properties but can also be used for its anti-block properties.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 97.0 – 100.0 Closed Tube Melt Point °C: 68.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 90.0 Water %: 0.00 – 0.20 Low solubility in water Available in multiple forms

Kemamide® U, Powder

Same as Kemamide® U Pastille, in powder form

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 97.0 – 100.0 Closed Tube Melt Point °C: 68.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 90.0 Water %: 0.00 – 0.20 Low solubility in water Available in multiple forms

Kemamide® VO, Bead

Derived from oleic acid from vegetable sources, this product is an unsaturated fatty primary amide

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

Kemamide® VO, Powder

Same as Kemamide® VO Bead, in powder.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

Kemamide® W-20, Pellet

Synthetic wax with a relatively high melting point and excellent slip properties.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

Kemamide® W-20, Prill

Synthetic wax with a relatively high melting point and excellent slip properties.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

Kemamide® W-40 DF, Prill

This product is a wax that benefits calendering processes, injection and blow molding, and extrusion processing.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 Compatible with a wide variety of waxes and plasticizers Increases surface's resistance to salt, heat, moisture, and most solvents

Kemamide® W-40 Prill

Formulated from stearic acid, this is used a synthetic wax, as a process lubricant.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

Kemamide® W-40, Powder

Same as Kemamide® W-40 Prill, in powder form.

These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 5.0 Garner Color (1963): 0.0 – 3.0 Closed Tube Melt Point °C: 140.0 – 145.0 Total Amine Value: 0.00 – 5.00 Total Ash: 0.00 – 0.05 Fineness % Thru 100 Mesh: 100.00 (Min) Fineness % Thru 325 Mesh: 99.50 – 100.00 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

Larostat® 264 A

Cationic antistat - >= 25.0 - < 50.0% alkyl dimethylethyl ammonium ethosulfate quat.

One of the most widely used cationic antistats in the world is LAROSTAT® 264 A, an alkyl dimethylethyl ammonium ethosulfate quat. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. LAROSTAT® 264 A is usually the antistat of choice for general applications where temperature or FDA requirements are not an issue. It is used for both internal and topical applications. Appearance @ 25°C Clear Amber Liquid Color, Gardner:12 max. Solids, % @ 105°C, 1.5 Hrs: 34.0 – 36.0 pH, 30 % Aqueous: 5.0 – 6.5 Viscosity @ 50°C, cSt: 230 – 330 Compatible with complex chemical systems including many anionic systems. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. It is used for both internal and topical applications. Polyurethane, Polystyrene, Rigid PVC, Fiberglass, Textiles, Dust control, Floor finishes, General purpose

Lithium Stearate 304

Designed to satisfy hydrocarbon and synthetic lubricant-based greases.

The lithium salt of distilled, hydrogenated fatty acids from animals or vegetables. ALKALINITY %: 0.00-0.15 FINENESS - THRU 200 MESH %: 99.00-100.00 FINENESS - THRU 40 MESH %: 100.00-100.01 LITHIUM CONTENT %: 2.40-2.60 WAP24A WATER %: 0.00-2.00 Polymeric coatings Zinc-silicone dioxide coatings Sealing gaskets for food containers Safe in articles that are in contact with food Can be used as a strong binder in certain makeup such as eye shadow, blushes, and other cosmetics. This can also be used as a lubricant in high temperatures.

Lithium Stearate 306

LS #306 is designed for lubricant-based greases, specifically around food processing. Slightly more acidic than #304.

Lithium Stearate is distilled from animal and vegetable sources. Appearance: White powder Melting Point: 212 °C / 414 °F Solubility in Water: Insoluble Molecular Weight: 290.42 g Safe with food processing Meet synthetic lubricant-based grease requirements Can be in paper components touching food Used in various makeup products such as eye shadow, blush, etc. Also good for use in contact with processing food in paper or cardboard.

Lithium Stearate PM

A distilled salt from fatty acids specifically used in grease and great for binding materials together.

Lithium Stearate is the salt distilled from fatty acids of animal or vegetable sources. Appearance: White powder Melting Point: >200 °C Molar Mass: 306.42 g/mol Insoluble in H20 Safe with food processing Meet synthetic lubricant-based grease requirements Can be in paper components touching food Used as a lubricant in industrial applications such as motor vehicles, aircraft, heavy machinery, etc.

LOWILITE™ 22

Low molecular weight benzophenone UV light absorber that offers effective protection for a wide variety of polymers.

LOWILITE™ 22 is a great general purpose, benzophenone UV absorber used in wide variety of polymers, HDPE, LDPE, PP, olefin copolymers (EPR, EPDM, EVA), PVC, polyesters, polystyrene, and ABS rubber. LOWILITE™ 20S provides protection for a variety of materials from degradation caused by exposure to UV light. FDA approvals for food contact and personal care applications means LOWILITE™ 20S can be safely used in water-based cosmetics and sun care products as well as polymers. Appearance: Pale yellow powder Melting Point: 47-50 °C Molecular Weight: 326 g/mol Density: 400 kg/m³ Flash Point: 475 °C Broad food-contact approvals

LOWILITE™ 26

Benzotriazole type UV light absorber, provides strong protection from UV initiated degradation in polyolefins and polyesters.

LOWILITE™ 26 is a strong benzotriazole UV light absorber that prevents yellowing and degradation for a variety of polyolefin and polyester applications. LOWILITE™ 26 provides UV protection in unsaturated polyester coatings cured with cobalt catalysts, without causing discoloration. Appearance: Pale yellow powder Molecular Weight: 316 g/mol Specific Gravity (@25 °C): 1.32 Bulk Density: 260 kg/m³ Melting Point: 137-142 °C Flash Point: 232 °C Broad food-contact approvals Non-discoloring in cobalt cured unsaturated polyester coatings Used in polyolefins, polyesters, and unsaturated polyester coatings cured with a cobalt catalyst.

LOWILITE™ 28

Benzotriazole type UV light absorber, provides strong protection for a variety of polymers from degradation when exposed to UV in the range of 290-400 nm.

LOWILITE™ 28 is a strong benzotriazole UV light absorber that prevents yellowing and degradation of wide variety of polymers including two part epoxies and urethanes. Appearance: Off-white powder Bulk Density: 260 kg/m³ Molecular Weight: 351 g/mol Specific Gravity (@ 25 °C): 1.17 Melting Point: 80 °C Flash Point: 230 °C Protection from UV in the range of 290-400 nm Available in powder and granular forms Unsaturated polyesters, acrylics, thermoplastic urethanes, moisture cured urethanes, two part epoxies and urethanes, oil alkyds and thermosetting acrylic enamels

LOWILITE™ 55

Benzotriazole type UV light absorber, that dissipates absorbed photochemical energy as heat.

LOWILITE™ 55 is an excellent benzotriazole UV light absorber with a high degree of photostability. It has a high absorption rate and dissipates that absorbed photochemical energy as heat. Appearance: Slightly yellow powder Bulk Density: 540 kg/m³ Molecular Weight: 225 g/mol Melting Point: 128-132 °C Flash Point: 205 °C Dissipates absorbed photochemical energy as heat Broad food contact approvals

LOWILITE™ 62

Low melting point HALS that exhibits low interaction with co-additives such as pigments.

LOWILITE™ 62 is a Hindered Amine Light Stabilizer (HALS) with a low melting range. Suitable for use in a variety of polymer systems such as polyolefins, styrenics, unsaturated polyesters, acrylics, PVC, and elastomers. It is ideal for systems containing high additive loadings such as multiple stabilizers and pigments. Appearance: Off-white slightly yellow microgranules Softening Point: 55-77 °C Molecular Weight: 3100-4000 g/mol Bulk Density: 570 kg/m³ Broad food-contact approvals Low interaction with co-additives such as pigments and other stabilizers Used in plastisols, adhesives, sealants and spin-finishes. Great for use in high-pigment load applications.

LOWILITE™ 77

Highly effective hindered amine light stabilizer, suitable for use alone or in combination with oligemeric HALS for thick parts such as car bumpers.

LOWILITE™ 77 is a superior stabilizer compared with UV absorbers and nickel-containing stabilizers. Suitable for use in a variety of polymers including polyolefins, polyamides, polyacetals, and styrenes such as ABS, PS, SAN, ASA, and HIPS. Can be used alone or in combination with oligemeric HALS such as Appearance: Slightly yellow micropellets Melting Point: 80-85 °C Molecular Weight: 481 g/mol Bulk Density: 560 kg/m³ Broad food-contact approvals Works well alone or in combination with oligomeric HALS for use in thick parts such as car bumpers or garden furniture.

LOWILITE™ 92

Liquid form HALS that exhibits low interaction with co-additives such as pigments and other stabilizers.

LOWILITE™ 92 is a ultraviolet light stabilizer suitable for use in polyolefins, styrenics, UPE, acrylics, flexible and rigid PVC, elastomers, adhesives, sealants, coatings, and polyols. Appearance: clear, colorless liquid Melting Point: <4 °C Viscosity (@38 °C): 170 mPa · s Density (@38 °C): 0.979 g/cm³ Liquid form Great for use in liquid applications such as coatings and sealants.

LOWILITE™ 94

Oligomeric hindered amine light stabilizer (HALS) with extremely low volatility, high thermal stability, and excellent compatibility with a wide variety of materials.

LOWILITE™ 94 is a HALS type UV stabilizer that is particularly effective when used in thin parts such as fibers and films due to it's oligomeric structure. LOWILITE™ 94 has extremely low volatility, high thermal stability, and excellent compatibility with a wide variety of substrates. Appearance: Slightly yellow granules Softening Point: 100-135 °C Molecular Weight: 2000-3300 g/mol Bulk Density: 510 kg/m³ Specific Gravity (@20 °C): 1.01 g/cm³ Flash Point: >160 °C Broad food contact approvals Effective as an antioxidant for long term thermal stability Extremely low volatility Excellent compatibility with a wide variety of polymers Thin part sections such as fibers and film, ethylene vinyl acetate, polypropylene blends with elastomers

Lowinox™ 22IB46-CS

Non-discoloring phenolic antioxidant for natural and synthetic rubber. Provides excellent metal deactivation in XLPE and stabilization against NOₓ impact.

LOWINOX™ 22IB46 is a non-discoloring, long-term stabilizer with negligible volatility, that works well in white, transparent, and colored natural or synthetic rubbers. It's excellent processing properties make it a great antioxidant for applications with lattices such as dipped rubber goods and carpet backings. Appearance: White to off-white powder Melting Point: 158-164 °C Molecular Weight: 298 g/mol Bulk Density: 250 kg/m³ Flash Point: 200 °C Non-discoloring in white and transparent applications Outstanding stabilization against NOₓ impact Negligible volatility Excellent metal deactivator for XLPE Outstanding stabilizer for lattices such as dipped rubber goods, foam, rubber threads, and carpet backing; photo applications; cross-linked polyethylene

LOWINOX™ CA22

Hindered phenolic antioxidant that is highly resistant to extraction and gives excellent color performance in polyolefins.

LOWINOX™ CA22 is an extraction resistant hindered phenolic antioxidant that gives excellent color stability in polyolefins. LOWINOX™ CA22 is effective at stabilizing a variety of plasticizers in flexible PVC, as well as hot melt adhesives and styrene copolymers. Appearance: Powder Molecular Weight: 545 g/mol Bulk Density: 380 kg/m³ Melting Point: >183 °C Broad food-contact approvals Excellent color stability Highly extraction resistant LDPE, HDPE, styrene copolymers

LOWINOX™ TBM6

Versatile phenolic antioxidant that is especially well suited for wire and cable applications, providing heat stability during processing and end use.

LOWINOX™ TBM6 is a versatile hindered thiophenol antioxidant that is especially well suited for medium, high, and extra high voltage wire and cable applications. It also synergizes well with carbon black, acts as an anti-skinning agent in hot melt adhesives, provides heat stability in lubricants, and antiscorch protection for polyurethanes during condensation of TDI on polyesters. LOWINOX™ TBM6 has excellent compatibility with peroxides and is highly resistant to thermo-oxidative degradation and washout. Appearance: White crystalline powder Molecular Weight: 358 g/mol Particle Size Distribution: 180-200 microns Assay: 98% minimum Melting Point: 160-164 °C Volatiles: 0.1% max Ash Content: 0.05% max Iron Content: 5 ppm Color APHA: Guaranteed 50 max Excellent long-term heat stability Non-staining Non-discoloring Food contact approvals Synergistic with carbon black Compatible with peroxides Antiscorch protection for polyurethanes Heat stability in lubricants Anti-skinning agent in hot melt adhesives Food packaging, HDPE and LDPE tubes, water and gas pipes, connectors, high voltage cables, greenhouse films

LOWINOX™ WSP

Non-staining phenolic antioxidant that gives excellent protection from heat aging degradation in a variety of elastomers and plastics.

LOWINOX™ WSP is a versatile non-staining, non-discoloring phenolic antioxidant that offers outstanding protection in elastomers and polymers. It has excellent heat aging resistance and can be used for products that will be steam sterilized. LOWINOX™ WSP is easily dispersed for use in latex applications and offers good protection from degradation in the presence of copper contamination. Appearance: Fine, slightly dusting crystalline powder Melting Point: 132-137 °C Molecular Weight: 421 g/mol Bulk Density: 360 kg/m³ Compacted Bulk Density: 470-500 kg/m³ Broad food contact approvals Excellent resistance to heat aging Non-staining Non-discoloring Good protection from degradation resulting from copper contamination Disperses well Latex, parts with copper contamination, parts intended for steam sterilization

Microthene® FA 700-00

20 micron high density polyethylene powder with a melt index of 10.

Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FA 709-00

20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FN 501-00

20 micron low density polyethylene powder with a melt index of 23.

Microthene FN 501-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 501-00 has the highest melt index of all the Microthene grades. Melt index: 23 g/10 min Density: 0.9245 g/cc Vicat softening point: 92.0°C/197.6°F Peak melting point: 114.5°C/238.1°F Low temperature brittleness: -50.0°C/-58.0°F Tensile strength @ break: 13.1/1,900 MPa/psi Elongation @ break: 120% Flexural modulus: 310.3/45,000 MPa/psi Hardness, Shore D: 54 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FN 510-00

20 micron low density polyethylene powder with a melt index of 5.

Microthene FN 510-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.923 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FN 519-00

20 micron low density polyethylene powder with a melt index of 5.Flow enhanced version of Microthene FN 510.

Microthene FN 519-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FN 519-00 is a flow enhanced version of FN 510-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 4.70 g/10 min Density: 0.9225 g/cc Vicat softening point: 97.0°C/206.6°F Peak melting point: 110.0°C/230.0°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 12.4/1,800 MPa/psi Elongation @ break: 550% Flexural modulus: 275.8/40,000 MPa/psi Hardness, Shore D: 53 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) in tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® MN 701-00

35 mesh (500 micron) polyethylene powder with a melt index of 70.

Microthene MN 701-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/Matrix for fabrics, paper

Microthene® MN 710-20

50 mesh (292 micron) polyethylene powder with a melt index of 22.

Microthene MN 710-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

Microthene® MN 711-20

35 mesh (500 micron) polyethylene powder with a melt index of 22.

Microthene MN 711-00 is a 35 mesh (500 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 22 g/10 min Density: 0.915 g/cc Vicat softening point: 81.0°C/177.8°F Peak melting point: 102.7°C/216.9°F Low temperature brittleness: -34.6°C/-30.3°F Tensile strength @ break: 9.3/1,350 MPa/psi Elongation @ break: 610% Flexural modulus: 228/33,000 MPa/psi Hardness, Shore D: 49/43 max/15 sec Particle shape: Irregular Average particle size: 35 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

Microthene® MN 714-00

50 mesh (292 micron) polyethylene powder with a melt index of 70.

Microthene MN 714-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 70 g/10 min Density: 0.912 g/cc Vicat softening point: 75.6°C/168.1°F Peak melting point: 100.8°C/213.4°F Low temperature brittleness: -22.7°C/-8.9°F Tensile strength @ break: 7.7/1,100 MPa/psi Elongation @ break: 400% Flexural modulus: 186/27,000 MPa/psi Hardness, Shore D: 51/44 max/15 seconds Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

Microthene® MN 722-00

50 mesh (292 micron) polyethylene powder with a melt index of 3.7

Microthene MN 722-00 is a 50 mesh (292 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 3.7 g/10 min Density: 0.923 g/cc Vicat softening point: 94.6°C/202.3°F Peak melting point: 109.0°C/228.2°F Low temperature brittleness: -68.1°C/-90.6°F Tensile strength @ break: 11.8/1,720 MPa/psi Elongation @ break: 610% Flexural modulus: 330/47,800 MPa/psi Hardness, Shore D: 56/50 max/15 sec Particle shape: Irregular Average particle size: 50 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

Microthene® MN 727-00

16 mesh (1190 micron) polyethylene powder with a melt index of 24.

Microthene MN 727-00 is a 16 mesh (1190 micron) ground low density polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene G powders offer the properties of polyolefin resins but in a ground particle size making it suitable for dispersion in aqueous systems. Melt index: 25 g/10 min Density: 0.924 g/cc Vicat softening point: 86.4°C/187.5°F Peak melting point: 109.6°C/229.3°F Low temperature brittleness: -28.3°C/-18.9°F Tensile strength @ break: 8.4/1,220 MPa/psi Elongation @ break: 110% Flexural modulus: 342/49,600 MPa/psi Hardness, Shore D: 56/49 max/15 sec Particle shape: Irregular Average particle size: 16 mesh Small ground particle size Long shelf life Easy to disperse FDA approved Automotive parts Color concentrates Structural parts Binder in filters and batteries Carrier/matrix for fabrics, paper

NAUGARD™ 445 Granular

Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

NAUGARD™ 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

NAUGARD™ 445 Powder

Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

NAUGARD™ 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

NAUGARD™ DLTDP

Thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.

NAUGARD™ DLTDP is a FDA-sanctioned antioxidant in polyolefins and other polymer systems. Used as an auxiliary stabilizer for polyethylene, polypropylene and synthetic rubbers to promote long term heat aging properties. Appearance: White flakes Melting Point: 39-41 °C Molecular Weight: 515 g/mol Odor: Mild Fatty Soluble: Heptane, toluene Slightly Soluble: Alcohol, ethyl acetate Non-dusting Some food contact approvals Synergy with hindered phenolic antioxidants such as ANOX® 20 and ANOX® PP18 to yield: Excellent color Excellent processing stability Excellent long term aging stability

NAUGARD™ DSTDP

Thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.

NAUGARD™ DLTDP is a FDA-sanctioned antioxidant in polyolefins and other polymer systems. Used as an auxiliary stabilizer for polyethylene, polypropylene and synthetic rubbers to promote long term heat aging properties. Appearance: White powder or beads Set Point: 67 °C Molecular Weight: 683 g/mol Odor: Mild fatty Soluble: Heptane, toluene Slightly Soluble: Alcohol, ethyl acetate Non-dusting Some food contact approvals Synergy with hindered phenolic antioxidants such as ANOX® 20 and ANOX® PP18 to yield: Excellent color Excellent processing stability Excellent long term aging stability

NAUGARD™ P

Liquid phosphite antioxidant designed to act as a processing stabilizer, decompose peroxides, and prevent discoloration.

NAUGARD™ P is a liquid phosphite secondary antioxidant that functions as a processing stabilizer and effectively synergizes with phenolic and thiodipropionate antioxidants. It offers low volatility and inhibits discoloration in a variety of polymers. Appearance: Clear viscous liquid Specific Gravity @ 25 °C: 0.978 Color (Gardner): 2 Molecular Weight: 688 g/mol Viscosity @ 25 °C: 5200 cps Flash Point (TOC Method): 221 °C Pour Point: -7 °C Low volatility Non-discoloring Synergizes with phenolic and thiodipropionate antioxidants Food contact approvals Polyolefins, and styrenics

NAUGARD™ Q Drop

Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers.

NAUGARD™ Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black such as tire carcasses and belts. Appearance: Amber drop Molecular Weight: 874 g/mol Specific Gravity (@ 25 °C): 1.06 Melting Point: 120-125 °C Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

NAUGARD™ Super Q

Amine antioxidant that imparts both processing and long term heat stability in carbon black filled polymers. Higher purity version of NAUGARD® Q.

NAUGARD™ Super Q Drop is an amine antioxidant that offers effective processing and long-term heat stability in a variety of rubber and polyolefin applications. It is designed to work well in polymers with high levels of carbon black for specialty applications such as geomembranes and wire and cable compounds. Appearance: Amber to brown pastille Specific Gravity (@25 °C): 1.08 Color - Gardner: 11 Softening Point: 115-135 °C Flash Point (Open Cup): 274-282 °C Molecular Weight: 874 g/mol Soluble (@ 25 °C): Acetone, chloroform, ethanol, naphtha, toluene Insoluble (@ 25 °C): Water, petroleum ether Higher purity than NAUGARD™ Q Good protection from degradation in polymers as a result of exposure to heat or oxygen Activates neoprene curing Compatible with peroxide curing systems Carbon black filled wire and cable insulation compounds, ethylene-propylene copolymers, geomembranes, LDPE, LLDPE, HDPE, tire carcass, retreads, apex, belts, hose, seals, mechanical goods, and footwear.

NAUGARD™ XL-1

Dual function antioxidant and metal deactivator, designed for use in polyolefins and polystyrenics that have residual metallic ions as a result of mineral fillers, inorganic pigments, or catalysts.

NAUGARD™ XL-1 combines an antioxidant and a metal deactivator for outstanding protection in variety of polyolefin and polystyrene systems. It is especially useful in resin systems that are mineral filled or have residual metallic ions from catalysts and inorganic pigments. NAUGARD™ XL-1 is non-discoloring and FDA regulated for use in most polymers. Appearance: White to off-white powder Specific Gravity (@20 °C): 1.12 Color (Trans @425 nm): 98.0 Molecular Weight: 697 g/mol Flash Point (closed cup): 260 °C Melting Point: 170-180 °C Functions as both a metal deactivator and an antioxidant Synergizes with other antioxidants FDA regulated Non-discoloring

NB-60, SW

Zinc Stearate NB-60 SW is the zinc salt of distilled hydrogenated fatty acids.

Zinc stearate is a metal salt of a fatty acid. PMC Biogenix offers zinc stearate in both precipitated and fused forms in a wide variety of end use applications. Total ash: 17.00-18.50 Water soluble salts: 0.00-0.50 Water: 0.00-1.00% Fineness thru 325 mesh: 99.80-100.00% Free fatty acids (as stearic): 0.00-2.00 Exceptional resistance to reaction with acid catalysts Soluble in many oils and waxes Can be used for lacquer sanding sealers as a sanding aid to minimize possibilities of "bloom" and "frost" development in subsequently applied top coats of synthetic varnishes containing acid catalysts.

n-Decane 95 Tech

n-Decane 95 Tech is a technical grade high-purity hydrocarbon excellently suited for crystallization, extraction and chromatography processes.

Haltermann Carless n-Decane 95 Tech is a high-purity hydrocarbon with higher n-Paraffins providing performance benefits suitable to highly specialized applications. n-Decane 95 tech provides low vapour pressure and high boiling point making it ideal for niche solvent applications. Color: <10 Density: 733 Distillation Range: 172-177 Evaporation Rate: 67 Refractive Index: 1.412 Aniline Point: 77 Aromatic Content: <0.01 Non-volatile Matter: <5 Flash Point: +45°C Vapor Pressure: 0.16 Kinetic Viscosity: 1.12

n-Dodecane 95 Tech

A clear & colorless high-purity hydrocarbon with a low vapor pressure of 0.02. It is commonly used as a distillation chaser and can also be an active component in fragrances or lubricants and greases.

Haltermann Carless n-Dodecane 95 Tech is a high-purity hydrocarbon with higher n-paraffins lengths for specialty applications. n-Dodecane 95 Tech has low vapour pressure and high boiling point making it ideal for specialty solvent applications. Color: <10 Density: 753 Distillation Range: 214-219 Refractive Index: 1.422 Aniline Point: 85 Aromatic Content: <0.1 Non-volatile Matter: <5 Flash Point: +79°C Vapor Pressure: 0.02 Kinetic Viscosity: 1.87

Paraloid™ K-130D

Paraloid™ K-130D is a processing aid in the production of vinyl that works to boost clarity and improve production performance.

This is a free-flowing acrylic process aid designed to improve the fusion, flow, strength and surface appearance of rigid or flexible vinyl. Acrylic polymer-based compound Free-flowing white powder Density (g/cc) 0.39 -0.49 High clarity in vinyl products Increased efficiency in production Maintains die-swell and viscosity for blow-molding Raises melt strength for better thermoforming

Pationic® 1042K

Pationic® 1042K is a glycerol monostearate (GMS) with 42% alpha-monoester content. It can be used as an internal mold release or for antistatic agent properties. This product is certified Kosher.

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid %: 1 max Free Glycerine %: 1 max Gardner Color: 3 max Iodine Value: 3 max Melting Point °C 60: 64 Monoglyceride %: 42 min FDA Approved

Pationic® 1052K

Pationic® 1052K is a 52% glycerol mono stearate to be used as an additive to polyolefins, styrenics, PVC, TPO and TPE

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1% Max Free Glycerine 1.5% Max Iodine Value 3 Max Monoglyceride 52% Min FDA Approved

Pationic® 1052P

Pationic® 1052P is a glycerol mono stearate (GMS) with 52% monoglyceride content that is palm oil derived

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier and dispersing agent. Free Fatty Acid 1% Max Free Glycerine 1% Max Iodine Value 3 Max Monoglyceride 52% Min Peroxide Value 1 meq/kg Max FDA Approved

Pationic® 1061

Pationic® 1061 is a 42% glycerol monooleate (GMO) with Mixed Tocopherols and Citric Acid

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti-fogging agent, flow modifier and dispersing agent. Melting Point: 140–145 °F / 60–63 °C Acid Value: 2.00 max Free Fatty Acid %: 1max Free Glycerine %: 1max Gardner Color: 3max Iodine Value: 87 - 114 Moisture %: 0.50 max Monoglyceride %: 42.00 min Peroxide Value meq/kg: 1 max Saponification Value: 170 - 190 FDA Approved Kosher

Pationic® 1240 Kosher

Pationic® 1240 is a lactic acid with 19 - 20% calcium. It can be used as a catalyst residue neutralizer. This product is certified Kosher.

Pationic® products offer diverse solutions for antistats, antifog, lubricants and mold releases. Calcium %: 19 - 20 pH (5% Solution): 11 min Sieve (40 Mesh Through) %: 98 min Calcium lactate-based additive Acid neutralizer

Pationic® 1530

Pationic® 1530 is a specialty glycerol ester containing Propylene Glycol with Propyl Gallate and Citric Acid and formulated to remain a liquid

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1% Max Iodine Value 55 Min 70 Max Monoglyceride 46% Min FDA Approved Stable Liquid

Pationic® 901K

Pationic® 901K is glycerol monostearate (GMS) with 95% monoglyceride derived from vegetable oil

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1.2% Max Free Glycerine 1.5% Max Iodine Value 3 Max Monoglyceride 95% Min 100% Max FDA Approved Produced to polymer additive heat stability standards

Pationic® 901RF

Pationic® 901RF is a glycerol monostearate (GMS) with 95% monoglyceride derived from hydrogenated vegetable oil and formulated for heat stability Pastille version of Pationic 901K

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1.2% Max Free Glycerine 1.5% Max Iodine Value 3 Max Monoglyceride 95% Min Peroxide Value 1 meq/kg Max FDA Approved Pastille form allows for easy handling Kosher Certified

Pationic® 907

Pationic® 907 is a 94.5% unsaturated, distilled monoglyeride and mixed with Asorbic Acid and Tocopherols

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti-fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1.20% Max Free Glycerine 1.20% Max Iodine Value 80 Min 115 Max Monoglyceride 94.50% Min Peroxide Value meq/kg: 2.00 max FDA Approved Wash off resistant Kosher Certified

Pationic® 909

Pationic® 909 is a glycerol monostearate (GMS) with 99% mono glyceride and 1% triglycerides. It can be used in PP, PE and EPS. This product is certified Kosher.

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Capillary Melt Point C: 72 - 75 Free Fatty Acid %: 1.20 max Free Glycerine %: 1.50 max Gardner Color: 3 max Iodine Value: 3 max Monoglyceride %: 95 min Sieve (100 Mesh Through) %: 98 - 100 Sieve (200 Mesh Through) %: 90 - 100 Triglyceride %: 1 max

Pationic® 915

Pationic® 915 is a glycerol monostearate (GMS) with 95% monoglyceride

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1.2% Max Free Glycerine 1.5% Max Iodine Value 5 Max Monoglyceride 92% Min FDA Approved Produced to polymer additive heat stability standards Kosher Certified

Pationic® 919

Pationic® 919 is a glycerol tristearate (GTS) with 99-100% triglycerides. It can be used as an external lubricant or mold release. This product is certified Kosher.

Pationic® products offer diverse solutions for antistats, antifog, lubricants and mold releases. Capillary Melt Point °C: 65 - 73 Free Fatty Acid %: 1 max Free Glycerine %: 1 max Gardner Color: 3 max Iodine Value: 3 max Sieve (100 Mesh Through) %: 98 - 100 Triglyceride %: 95 - 100 High purity Narrow particle size Stability Continuous and homogeneous

Pationic® 930

Pationic® 930 is a lactic acid derivative. It can be used as a general purpose acid acceptor. This product is certified Kosher.

Pationic® products offer diverse solutions for antistats, antifog, lubricants and mold releases. Calcium %: 4.20 - 5.20 Gardner Color: 9 max Melting Point °C: 45 - 55 pH: 5 - 7 Sieve (20 Mesh Through) %: 99 min Lubricant and neutralizer

Pationic®1083

Pationic® 1083 is a glycerol mono oleate product and has a 52% minimum alpha-monoester content

Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an antifogging agent, flow modifier and dispersing agent. Free Fatty Acid 1.0% Max Free Glycerine 1.5% Max Iodine Value 70 Min 80 Max Monoglyceride 52% Min FDA Approved Kosher

PhosGard® 700

Phosphorus/Nitrogen Intumescent flame retardant.

PhosGard 700 is a non halogenated flame retardant for use in polyolefins, TPU and Thermosets. It is a blend of Phosphorus (17%) and Nitrogen (21%). The nitrogen content helps in char formation and thereby is an effective intumescent. Appearance: White powder Phosphorus: 17 to 21% Nitrogen: 21 to 22% Moisture: ≤0.50% Particle size, D50: ≤10 microns Specific gravity: 1.2 High Purity Good thermal stability Non halogenated Thermosets Adhesives Coatings

PhosGard® APP

Ammonium Polyphosphate

PhosGard APP is a fine particle crystal phase II modified Ammonium Polyphosphate with phosphorus content of 31% and Nitrogen content of 15%. PhosGard APP is a low cost flame retardant used to achieve intumescence because the nitrogen present aids in char formation. PhosGard APP is also effective in water based coatings, polyurethanes, thermosets and polyolefins. Appearance: Fine white powder Phosphorus content: 31 to 32% Nitrogen content: 14 to 15% Moisture: ≤0.25% Solubility in water, @ 25°C (g/100 ml): ≤0.5% Decomposition temperature: ≥275°C PH value: 5.5 to 7 Particle size, D50: ≤10 microns Low cost Fine particle size Compatible with a wide variety of resins Helps in Char formation Intumescent Flame Retardants Water based coatings Polyurethanes Thermosets

PhosGard® TCP

Tricresyl Phosphate with phosphorus content of 8.4%

PhosGard TCP is a low viscosity phosphorus flame retardant /plasticizer used in PVC, PE and polyurethane coatings and foam. It is recommended for use in synthetic rubber, butylated rubber and chloroprene rubber. Appearance: Clear transparent liquid Phosphorus (theoretical): 8.4% Phenol content: ≤500 ppm Moisture: ≤0.10% Color (APHA): ≤0.10 Viscosity (25°C, mPa.s): 56 to 62 Specific gravity: 1.16 to 1.18 Low viscosity Excellent hydrolytic stability Electric insulation Mildew and abrasion resistance Polyurethane Coatings Polyurethane foam Rubber formulations

POLYBOND™ 1009

Acrylic modified polyethylene additive to improve adhesion of PE to metals and other polar surfaces

POLYBOND™ 1009 can be applied as a coupling agent for glass or mica filled polyethlyene and provides good adhesion to aluminum, stainless steel, tin-plated steel, and a variety of other substances. Appearance: Off-white pellet Melt Flow Rate (@ 190°C): 5.0g/10 min Acrylic Acid Content: 5.5-6.5% Density (@ 23°C): 0.95 g/cm³ Bulk Density: 0.5 g/cm³ Melting Point: 127 °C Low gel count makes this grade ideal for use as a coupling agent and adhesion promoter in sheet and film applications. Improves strength and other physical properties when used as a coupling agent in glass or mineral-filled Polyethylene applications Enhances hydrolytic stability and impact strength when used as a compatibilizer in polythethylene-polyamide blends Some food contact approvals Improves adhesion of polyethylene to metals and other polar surfaces.

POLYBOND™ 3009

Maleic anhydride modified PE coupling agent for glass and mineral filled systems.

POLYBOND™ 3009 is a coupling agent for filled PE systems that provides improved physical properties including strength and impact resistance. It provides good adhesion in film and sheet applications. Appearance: Off-white pellet Melt Flow Rate (@ 190°C): 5.0g/10 minutes Maleic Anhydride Content: 0.8-1.2% Density (@ 23°C): 0.95 g/cm³ Bulk Density: 0.6 g/cm³ Melting Point: 127 °C Low gel count makes this grade ideal for use as a coupling agent and adhesion promoter in sheet and film applications. Improves strength and other physical properties when used as a coupling agent in glass or mineral-filled Polyethylene applications Enhances hydrolytic stability and impact strength when used as a compatibilizer in polythethylene-polyamide blends Some food contact approvals Improves adhesion in sheet and film applications; improves hydrolytic stability in PE/nylon blends; improves impact strength in mineral-filled PE applications; improves strength in glass-filled PE applications

POLYBOND™ 3029

Maleic anhydride modified HDPE coupling agent ideal for use in wood fiber composites where improved strength and reduced water uptake is essential.

POLYBOND™ 3029 provides improved tensile, flexural, and impact strength, as well as lower water absorption compared to general purpose coupling agents. It is ideal in wood and natural fiber-filled polyethylene compsites. Appearance: Off-white pellets Melt Flow Rate (@190 °C): 4.0 g/10 minutes Maleic Anhydride Content: 1.5-1.7% Density (@ 23°C): 0.95 g/cm³ Bulk Density: 0.60 g/cm³ Melting Point: 130 °C High functionality reduces water uptake and improves strength in PE wood composites Enhances hydrolytic stability in polyethylene - polyamide blends Improves strength and impact properties in composites with high-loading rates of glass or mineral fillers Improves dispersion and of halogen-free flame retardants in wire and cable compounds Some food-contact approvals Ideal for use as a coupling agent in PE wood composites; dispersion aid in wire and cable compounds utilizing halogen-free flame retardants; improves strength in PE composites with high mineral or glass filler loading rates

POLYBOND™ 3349

Coupling agent and compatibilizer for linear low density polyethylene and polyamide blends; excellent for use in composites with high levels of glass or mineral fillers.

POLYBOND™ 3349 is a coupling agent for glass-filled polyethylene composites with high mineral filler levels. It gives enhanced hydrolytic stability and strength when used to compatibalized polyethylene/polyamide blends. It also functions as a process aid for halogen-free flame retardant wire and cable compounds by providing improved dispersion and mechanical properties. Appearance: Off-white pellet Melt Flow Rate (@190 °C): 8.0g / 10 minute Maleic Anhydride Content: 1.0-1.4% Density (@ 23°C): 0.93 g/cm³ Bulk Density: 0.6 g/cm³ Melting Point: 123 °C Improves dispersion of halogen-free flame retardants in wire and cable compounds High maleic anhydride content gives sufficient functionality for use with high mineral filler loading levels Halogen free flame retardant compounds for wire and cable; linear low density polyethylene (LLDPE) / polyamide blends; LLDPE composites with high mineral or glass filler loading

Regular, Powder

Manufactured using the fusion process. The regular grade is often used for general purposes & ceramics.

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. Appearance: white powder Melting Point: 160 °C Insoluble in H2O Great tin uses such as thin fibers and films. Does not melt , but will reach plastic phase at a normal processing temperature. Great catalyst/neutralizer.

Stoner® A320 Mold Cleaner

Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for molds.

Stoner® A320 All Purpose Cleaner is a time saving, concentrated, water-based cleaner for rotational molds, injection molds, cast urethane molds & more. This powerful, high pH concentrate removes oily dirt, grime, mold release and left behind resin on rotational molds. Powerful, concentrated, water-based all-purpose cleaner for rotational molds Quickly cleans within seconds Reduces the need for sandblasting and breaking down molds Safe for use on all rotational mold finishes, plastic, rubber, waxes and metal. <iframe width="397" height="224" src="https://www.youtube.com/embed/WCU5foP6N78" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

T-1 GE

Sodium Stearate is a sodium salt of distilled hydrogenated fatty acids.

Vulcanized promotor, generally used in polymers however specifically seen in room deodorants. Moisture: 3.0% Free fatty acid: 0.2-1.5% Fineness, % thru 100 mesh: 85 Softening point: 205 °C (typical) Soluble in water, methanol, and ethanol High softening point Excellent resistance to hear discoloration Sodium Stearate T-1 is applicable for high impact polystyrene and polypropylene in meeting processing requirements. Can also be used as a dispersant and wetting agent in paper and paperboard processing. In latex paints, it can be sued as a dispersant and emulsifier.

TraSys® 414

Heavy-duty release ideal for parting lines, removable pins and inserts, and complex molds with negative spaces and high difficulty in de-molding.

A great mold release coating that will satisfy production, environmental, and safety requirements when removing mold. Excellent durability and lubricity Does not use the use of oils and is solvent-free

TraSys® 420

Semi-permanent mold release for PE & cross link polyethylene. Work horse release for rotational molding.

A great mold release coating that will satisfy production, environmental, and safety requirements when removing mold. Great for rotational mold internals Has great control on the release process when needed

TraSys® 500

Hi-Heat (open flame) mold release for rotational molding applications reaching above 600F.

A great mold release coating that will satisfy production, environmental, and safety requirements when removing mold. Great for rotational mold internals Releases at a controlled rate

TraSys® 715

Light release designed for a consistent, controlled release in rotational molding. Formulated for large or thin plastic parts.

A great mold release coating that will satisfy production, environmental, and safety requirements when removing mold. TraSys® 715 is ideal for rotational mold internals and other molding applications where a consistent, controlled release is desired

TraSys® RotoFlow™

This easy-to-use aerosol formula is designed to aid the flow of polyolefin and nylon resins into difficult to fill areas of rotational molds, producing fully-molded parts.

TraSys® RotoFlow™ is a high-efficiency mold coating for rotomolded polyolefin and nylon resins. By enhancing the flow of resin, TraSys® 4000 RotoFlow™ fills voids around inserts, tight radii, threads, and deep cavities in molds, thus improving the operational performance of the resulting part and removing pinholes, bridging, thinning and static lines from the surface for an improved appearance. Designed with user and environmental safety in mind, TraSys® RotoFlow™ does not contain Class I or II ozone depleting substances, CFC or HCFC propellants, or chlorinated solvents. Improves quality and consistency of rotomolded polyolefin, nylon and cross-link parts Increases strength of inserts Removes pinholes, voids and blow outs Reduces bridging, thinning, blowholes, and static lines Improves appearance and operational performance of threads Formulated for user and environmental safety

TraSys® ZIP SLIP®

ZIP-SLIP® is an excellent preventative maintenance product that seals the edges of a mold when applied to the parting line of a rotational mold.

ZIP-SLIP® eliminates unwanted build-up of resin on the parting line that can cause gaps, leaks, messes, increase equipment maintenance and clean-up time. ZIP-SLIP® improves efficiencies by maintaining a tighter seal on the parting line, it helps eliminate pinholes, voids, and blowholes. Colorless Non-staining Eliminate unwanted build-up of resin on the mold's parting line Maintain a tighter mold seal, reducing leaks and messes Improves part appearance and reduces defects caused by gaps in the parting line Saves time on equipment maintenance and clean up Stoner® M520 ZIP SLIP® is a preventative maintenance product for Rotational Molding to eliminate build-up on the outer sealing edge of molds. <iframe width="560" height="315" src="https://www.youtube.com/embed/pmVsCkMe6G8" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Twinkling Star ATO

Synergist used in conjunction with brominated or Chlorinated compounds to reduce flammability.

Twinkling Star is a brand of Antimony Trioxide (ATO) that is a white, solid powder used as a fire retardant in conjunction with a halogen to reduce a product's flammability. It functions as a synergist thereby reducing the amount of halogen-based product required to achieve desired levels of flammability. Antimony Trioxide (ATO) does not melt or vaporize during normal use and will not form vapors unless heated to extremely high temperatures. Color: White crystalline powder Assay: 99.5% min (High Tint) Arsenic (As): 0.06% max Iron (Fe): 0.004% max Lead (Pb): 0.08% max Tin (Sn): 0.008% max Mesh: 0.10% max Particle Size: 1.2 to 1.8 microns (cubic crystals) Low cost Low impurities Fine particle size Synergist to provide flame retardancy Catalyst for PET manufacture Frictional additive in automotive brake linings Clarifier for glass Opacifier for enamels Coating for titanium dioxide

ULTRANOX™ 626

High performance solid phosphite antioxidant that improves color stability and reduces polymer degradation during compounding, fabrication, and end use in a variety of resins.

ULTRANOX™ 626 is a solid organophosphite antioxidant that improves gas fading performance and color stability during compounding, fabrication, and end use. It delivers high performance at low loading rates, making this a cost effective addition to polymer formulas. ULTRANOX™ 626 synergizes with benzophenone and benzotriazole light stabilizers. ULTRANOX™ 626 is so effective, it can replace another phosphite antioxidant in your formula and deliver equivalent performance at a significantly lower dosing rate. We've provided a handy calculator below to help you determine the dose of ULTRANOX™ 626 needed to replace your current phosphite antioxidant.<div id="dosing-rate-calc" class=""> <h3>Dosing Rate Calculator</h3> <div class="calc-item"><span>Current Phosphite</span> <div id="js-phosphite-calc" class="wrapper-dropdown" tabindex="1"><span id="js-phosphite-value">Select your Option</span><ul class="dropdown"><li><a href="#" data-percent=".048">ALK240/168</a></li><li><a href="#" data-percent=".044">TNPP</a></li><li><a href="#" data-percent=".073">Doverphos 9228</a></li><li><a href="#" data-percent=".098">Adekastab PEP-36</a></li><li><a href="#" data-percent=".059">Hostanox PEP-Q</a></li></ul></div> <div class="calc-row"><div class="calc-item"><span>Current Dosage</span><div class="input-wrapper"><input type="type" data-formula="dosage" placeholder="Enter Dosage"><div class="input--unit-wrapper"> <div class="input--unit"><input class="radio-btn" type="radio" id="ppm" name="dosage-unit" value="ppm" checked><label for="ppm">ppm</label></div> <div class="input--unit"><input class="radio-btn" class="radio-btn" type="radio" id="wt" name="dosage-unit" value="wt%" ><label for="wt">wt%</label></div></div></div></div><div class="calc-item result"><span class="trade-mark">ULTRANOX</span> <span>626 &nbsp; Dosage</span><div id="ultra-dosage">0</div></div><div class="calc-item"><span>Current Phosphite Annual Vol</span><div class="input-wrapper"><input type="type" data-formula="annual" placeholder="Enter Annual Vol"><div class="input--unit-wrapper"><div class="input--unit"><input class="radio-btn" type="radio" id="kg" name="vol-unit" value="kg" checked><label for="kg">kg</label></div><div class="input--unit"><input class="radio-btn" type="radio" id="lbs" name="vol-unit" value="lbs"><label for="ppm">lbs</label></div></div></div></div><div class="calc-item result"><span class="trade-mark">ULTRANOX</span> <span>626 &nbsp; Annual Vol</span><div id="ultra-annual">0</div></div></div><button class="reset-calc" onclick="resetCalc()">Reset</button></div> <style> #grade-details-page #dosing-rate-calc { width: 720px; } #js-phosphite-calc.error { color: red; outline: 1px solid red; margin-left: 1px; } #grade-details-page #dosing-rate-calc #js-phosphite-value.error { color: red; } #grade-details-page #dosing-rate-calc .wrapper-dropdown { position: relative; width: 250px; padding: 6px 10px; background: #fff; border: 1px solid rgba(0,0,0,0.15); box-shadow: 0 1px 1px rgba(50,50,50,0.1); cursor: pointer; /* outline: none; */ } #grade-details-page #dosing-rate-calc .wrapper-dropdown span { display: block; } #grade-details-page #dosing-rate-calc .wrapper-dropdown:after { content: ""; width: 0; height: 0; position: absolute; right: 15px; top: 50%; margin-top: -3px; border-width: 6px 6px 0 6px; border-style: solid; border-color: #8aa8bd transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown { display: none; position: absolute; top: 45px; left: 0; right: 0; padding: 0; background: white; border-radius: inherit; border: 1px solid rgba(0,0,0,0.17); box-shadow: 0 0 5px rgba(0,0,0,0.1); font-weight: normal; -webkit-transition: all 0.5s ease-in; -moz-transition: all 0.5s ease-in; -ms-transition: all 0.5s ease-in; -o-transition: all 0.5s ease-in; transition: all 0.25s ease-in; list-style: none; /* Hiding */ opacity: 0; pointer-events: none; z-index: 50; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown:after { content: ""; width: 0; height: 0; position: absolute; bottom: 100%; right: 15px; border-width: 0 6px 6px 6px; border-style: solid; border-color: #fff transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown:before { content: ""; width: 0; height: 0; position: absolute; bottom: 100%; right: 13px; border-width: 0 8px 8px 8px; border-style: solid; border-color: rgba(0,0,0,0.1) transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li a { display: block; padding: 10px; text-decoration: none; color: #8aa8bd; border-bottom: 1px solid #e6e8ea; box-shadow: inset 0 1px 0 rgba(255,255,255,1); -webkit-transition: all 0.3s ease-out; -moz-transition: all 0.3s ease-out; -ms-transition: all 0.3s ease-out; -o-transition: all 0.3s ease-out; transition: all 0.3s ease-out; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li i { float: right; color: inherit; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:first-of-type a { border-radius: 7px 7px 0 0; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:last-of-type a { border: none; border-radius: 0 0 7px 7px; } /* Hover state */ #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:hover a { background: #f3f8f8; } /* Active state */ #grade-details-page #dosing-rate-calc .wrapper-dropdown.active .dropdown { display: block; opacity: 1; pointer-events: auto; } #grade-details-page #dosing-rate-calc .no-opacity .wrapper-dropdown .dropdown, #grade-details-page #dosing-rate-calc .no-pointerevents .wrapper-dropdown .dropdown { display: none; opacity: 1; /* If opacity support but no pointer-events support */ pointer-events: auto; /* If pointer-events support but no pointer-events support */ } #grade-details-page #dosing-rate-calc .no-opacity .wrapper-dropdown.active .dropdown, #grade-details-page #dosing-rate-calc .no-pointerevents .wrapper-dropdown.active .dropdown { display: block; } #grade-details-page #dosing-rate-calc h3 { font-family: 'pluto_sans_bold',Arial,sans-serif; font-size: 18px; line-height: 28px; letter-spacing: 1px; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .calc-row { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row wrap; flex-flow: row wrap; -webkit-box-align: start; -ms-flex-align: start; align-items: flex-start; } #grade-details-page #dosing-rate-calc .calc-item { margin-bottom: 35px; } #grade-details-page #dosing-rate-calc #ultra-dosage, #grade-details-page #dosing-rate-calc #ultra-annual { width: 320px; } #grade-details-page #dosing-rate-calc .input-wrapper { position: relative; display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-align: center; -ms-flex-align: center; align-items: center; width: 365px; } #grade-details-page #dosing-rate-calc #wt, #grade-details-page #dosing-rate-calc #pmp, #grade-details-page #dosing-rate-calc #kg, #grade-details-page #dosing-rate-calc #lb { background-color: transparent; border: unset; } #grade-details-page #dosing-rate-calc select, #grade-details-page #dosing-rate-calc input[type="type"] { width: 250px; padding: 0; padding-left: 10px; font-size: 21px; line-height: 40px; color: #54575A; } #grade-details-page #dosing-rate-calc select { display: block; height: 44px; border: 1px solid #EAECEE; } #grade-details-page #dosing-rate-calc input[type="type"] { margin-right: 2px; border: 1px solid #EAECEE; } #grade-details-page #dosing-rate-calc input[type="type"].error::placeholder { font-size: 16px; color:#e03e3e; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .radio-btn { -webkit-appearance: radio; margin-left: 10px; padding-left: 5px; color: #54575A; } #grade-details-page #dosing-rate-calc .radio-btn + label { margin: 0; color: #54575A; } #grade-details-page #dosing-rate-calc .radio-btn:checked + label { padding-left: 2px; font-weight: 600; color: #0099d8; } #grade-details-page #dosing-rate-calc .input--unit-wrapper { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row; flex-flow: row; } #grade-details-page #dosing-rate-calc .input--unit { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row; flex-flow: row; align-items: center; } #grade-details-page #dosing-rate-calc #ultra-dosage, #grade-details-page #dosing-rate-calc #ultra-annual { width: 250px; padding: 0 10px; font-size: 21px; color: #54575A; line-height: 44px; background-color: #EAECEE; border-radius: 6px; } #grade-details-page #dosing-rate-calc .calc-item span { font-size: 14px; font-weight: 600; line-height: 32px; color: #415055; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .result { width: 250x; margin-left: 45px; } #grade-details-page #dosing-rate-calc .trade-mark { position: relative; margin-right: 23px; } #grade-details-page #dosing-rate-calc .trade-mark::after { position: absolute; top: -13px; right: -17px; content: "TM"; font-size: 9px; } #grade-details-page #dosing-rate-calc .reset-calc { margin-top: 5px; padding: 0 51px; font-size: 14px; line-height: 43px; color: white; text-transform: uppercase; background-color: #0099D8; border: unset; } #grade-details-page #dosing-rate-calc #over-ride-selectjs { width: 250px; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxItText { position: relative; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxItText.error { position: absolute; bottom: -4px; left: 0; color: #e03e3e; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxIt:focus { margin-left: 1px; outline: 1px solid red; } @media (max-width: 719px) { #dosing-rate-calc { width: 500px; } .result { margin-left: 0; } .input-wrapper { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: vertical; -webkit-box-direction: normal; -ms-flex-flow: column; flex-flow: column; -webkit-box-align: start; -ms-flex-align: start; align-items: flex-start; } .input--unit-wrapper { margin-top: 5px; } } @media (max-width: 1054px) { #grade-details-page #dosing-rate-calc .calc-row { flex-flow: column; } #grade-details-page #dosing-rate-calc .result { margin-left: 0; } #grade-details-page #dosing-rate-calc .input-wrapper { align-items: flex-start; } } </style> <script> document.addEventListener("DOMContentLoaded", function(){ let currentPhosphite = 0; const ultraPhosphite = 0.103; let dosageWT = false; let dosagePPM = true; let annualVolKG = true; let annualVolLBS = false; let dosage = ""; let annualVol = ""; let unit = ""; let roundedDosage = 0; let finalCount = 1; const calc = document.getElementById("dosing-rate-calc"); const dosageOutput = document.getElementById("ultra-dosage"); const annualOutput = document.getElementById("ultra-annual"); // gather values const radioBtns = [...calc.getElementsByClassName("radio-btn")]; const inputTypes = [...calc.querySelectorAll('[type="type"]')]; let phosGather = document.getElementById("js-phosphite-value"); // data-formula getPhosVal = () => { phosGatherVal = phosGather.innerHTML; // console.log(phosGather); switch (phosGatherVal) { case 'ALK240/168': currentPhosphite = 0.048; break; case 'TNPP': currentPhosphite = 0.044; break; case 'Doverphos 9228': currentPhosphite = 0.073; break; case 'Adekastab PEP-36': currentPhosphite = 0.098; break; case 'Hostanox PEP-Q': currentPhosphite = 0.0590; break; } // console.log("updated phos " + currentPhosphite); return currentPhosphite; } // ULTRANOX 626 Dosage = (Current Phos % / U626 Phos %) x (Current Phos dose) // https://www.rapidtables.com/convert/number/Percent_to_PPM.html#how ultraDosage = (e) => { let currentDosageUnit = dosagePPM ? " ppm" : "%"; if (dosage === "") { // console.log("in Ultra enter doage"); } else { currentPhosphite = getPhosVal(); // console.log("in Ultra line65 phosPhite Value " + currentPhosphite); if (currentPhosphite === 0) { // console.log("zero"); phosGather.innerHTML = "Select your Current Phosphite"; // phosGather.style.fontSize ="10px"; phosGather.classList.add("error"); document.getElementById("js-phosphite-calc").classList.add("error"); phosGather.focus(); resetCalc(); return; } // phosGather.style.fontSize ="unset"; phosGather.classList.remove("error"); document.getElementById("js-phosphite-calc").classList.remove("error"); // console.log(`in Ultra ${currentPhosphite} / ${ultraPhosphite} x ${dosage}`); finalCount = ((currentPhosphite / ultraPhosphite) * dosage); // console.log("in Ultra final count " + finalCount); roundedDosage = Math.round(finalCount * 100) / 100; console.log("in Ultra currentUnit " + currentDosageUnit); dosageOutput.innerHTML = roundedDosage + currentDosageUnit; } } //https://www.rapidtables.com/convert/weight/kg-to-pound.html ultraAnnual = (e) => { let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (annualVol === "") { console.log("enter annual vol"); } else { currentPhosphite = getPhosVal(); if (currentPhosphite === 0) { console.log("zero"); phosGather.innerHTML = "Select your Current Phosphite"; phosGather.style.fontSize ="10px"; phosGather.classList.add("error"); phosGather.focus(); resetCalc(); return; } phosGather.style.fontSize ="unset"; phosGather.classList.remove("error"); finalCount = ((currentPhosphite / ultraPhosphite) * annualVol); roundedDosage = Math.round(finalCount * 100) / 100; annualOutput.innerHTML = roundedDosage + currentAnnualUnit; } } convert = (val, unit) => { let value = 0; if (unit === "%") { value = val / 10000; dosage = value; } else if (unit === "ppm") { value = 10000 * val; dosage = value; } else if (unit === "kg") { value = val * 0.45359237; //lbs to kg annualVol = value; } else if (unit === "lbs") { value = val / 0.45359237; //kg to lbs annualVol = value; } else { value= "error"; } // value = Math.round(value * 100) / 100; return value; } getInputValues = () => { inputTypes.forEach(function(el) { el.addEventListener('change', function(e) { let currentDosageUnit = dosagePPM ? " ppm" : "%"; let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (el.dataset.formula === "dosage") { dosage = event.target.value; if(isNaN(dosage)) { el.value = "Numbers only"; el.style.color = "red"; return; } else { el.style.color = "#54575A"; el.value = dosage + currentDosageUnit; } if ( dosageWT && dosage > 100 ) { el.value = ""; el.placeholder = "enter dosage max 100%"; el.classList.add("error"); el.style.fontSize = "16px"; dosageOutput.innerHTML = "0"; return; } else { el.placeholder = "Enter Dosage"; // el.style.color = "#54575A"; el.classList.remove("error"); el.style.fontSize = "21px"; } ultraDosage(); } else if (el.dataset.formula === "annual") { annualVol = event.target.value; if(isNaN(annualVol)) { el.value = "Numbers only"; el.style.color = "red"; return; } else { el.style.color = "#54575A"; el.value = annualVol + currentAnnualUnit; } console.log("in getInputValue currentUnit " + currentDosageUnit); ultraAnnual(); } }); }); } changeUnit =(type, unit) => { inputTypes.forEach(function(el) { let currentDosageUnit = dosagePPM ? " ppm" : "%"; let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (el.dataset.formula === "dosage" && type === "dosage") { if (el.value === "") { el.value = ""; el.placeholder = "Enter Dosage in " + unit; } else { console.log("inChange dosage before " + dosage); console.log("inChange unit sending to convert " + unit); console.log("inChangedosage before " + dosage); dosage = convert(dosage, unit); console.log("inChangedosage converted " + dosage); // el.value = dosage + currentDosageUnit; el.value = (Math.round(dosage * 100) / 100) + currentDosageUnit; console.log("inChange el value " + el.value + "sending to ultra"); ultraDosage(); } } else if (el.dataset.formula === "annual" && type === "annual") { if (el.value === "") { el.value = ""; el.placeholder = "Enter Vol in " + currentAnnualUnit; } else { // inputVal = el.value; annualVol = convert(annualVol, unit); el.value = (Math.round(annualVol * 100000) / 100000) + currentAnnualUnit; // el.value = annualVol + currentAnnualUnit; ultraAnnual(); } } }); } updateRadioCheck = (oldUnit, newUnit) => { radioBtns.forEach(function(el) { }); } getRadioBtnValues = () => { radioBtns.forEach(function(el) { el.addEventListener('change', function() { let currentDosageUnit = dosagePPM ? " ppm" : "%"; if (el.checked) { let radio = el.getAttribute("value"); switch(radio) { case 'wt%': // debugger; dosageWT = true; dosagePPM = false; console.log("in getRadioBtn currentUnit " + currentDosageUnit); changeUnit("dosage", "%"); break; case 'ppm': dosagePPM = true; dosageWT = false; changeUnit("dosage", "ppm"); break; case 'kg': annualVolKG = true; annualVolLBS = false; changeUnit("annual", "kg"); break; case 'lbs': annualVolLBS = true; annualVolKG = false; changeUnit("annual", "lbs"); break; } } }) }); } function DropDown(el) { this.dd = el; this.placeholder = this.dd.children('span'); this.opts = this.dd.find('ul.dropdown > li'); this.val = ''; this.index = -1; this.initEvents(); } DropDown.prototype = { initEvents : function() { var obj = this; obj.dd.on('click', function(event){ $(this).toggleClass('active'); return false; }); obj.opts.on('click',function(){ var opt = $(this); obj.val = opt.text(); obj.index = opt.index(); obj.placeholder.text(obj.val); }); }, getValue : function() { return this.val; }, getIndex : function() { return this.index; } } $(function() { var dd = new DropDown( $('#js-phosphite-calc') ); $(document).click(function() { // all dropdowns $('#js-phosphite-value').addClass('active'); // resetValues(); }); }); document.getElementById("js-phosphite-value").addEventListener('click', function() { resetValues(); }) resetValues = () => { inputTypes.forEach(function(el) { el.value = ""; }); dosageOutput.innerHTML = "0"; annualOutput.innerHTML = "0"; // getRadioBtnValues(); dosageWT = false; dosagePPM = true; annualVolKG = true; annualVolLBS = false; currentPhosphite = 0; radioBtns.forEach(function(el) { if (el.id === "ppm" || el.id === "kg") { el.checked = true; } else { el.checked = false; } }); console.log("in reset Values - cleared values"); } resetCalc = () => { resetValues(); document.getElementById("js-phosphite-value").innerHTML = "Select your option"; } resetCalc(); getRadioBtnValues(); getInputValues(); });// end of DocumentLoad </script> Appearance: White powder Melting Point: 170-180 °C Acid Number: 1.0 mg KOH/g Free 2,4-di-t-butylphenol Content: 1.0% max Phosphorus Content: 10.0-10.3% Triisopropanolamine Content: 0.5-1.0% Molecular Weight: 604 g/mol Flash Point (Closed Cup): 168 °C Bulk Density @ 20 °C: 0.43 g/ml Food contact approvals Excellent color stability during compounding, fabrication and end use Improved gas fading performance Synergizes with benzophenone and benzotriazole light stabilizers High performance at low load rates Polyolefins, styrenics, engineering thermoplastics

ULTRANOX™ 626A

High performance solid phosphite antioxidant that improves color stability and reduces polymer degradation during compounding, fabrication, and end use in a variety of resins. Similar to ULTRANOX® 626 but in a granular form.

ULTRANOX™ 626A is a solid organophosphite antioxidant that improves gas fading performance and color stability during compounding, fabrication, and end use. It delivers high performance at low loading rates, making this a cost effective addition to polymer formulas. ULTRANOX™ 626A synergizes with benzophenone and benzotriazole light stabilizers. ULTRANOX™ 626A is so effective, it can replace another phosphite antioxidant in your formula and deliver equivalent performance at a significantly lower dosing rate. We've provided a handy calculator below to help you determine the dose of ULTRANOX™ 626A needed to replace your current phosphite antioxidant.<div id="dosing-rate-calc" class=""> <h3>Dosing Rate Calculator</h3> <div class="calc-item"><span>Current Phosphite</span> <div id="js-phosphite-calc" class="wrapper-dropdown" tabindex="1"><span id="js-phosphite-value">Select your Option</span><ul class="dropdown"><li><a href="#" data-percent=".048">ALK240/168</a></li><li><a href="#" data-percent=".044">TNPP</a></li><li><a href="#" data-percent=".073">Doverphos 9228</a></li><li><a href="#" data-percent=".098">Adekastab PEP-36</a></li><li><a href="#" data-percent=".059">Hostanox PEP-Q</a></li></ul></div> <div class="calc-row"><div class="calc-item"><span>Current Dosage</span><div class="input-wrapper"><input type="type" data-formula="dosage" placeholder="Enter Dosage"><div class="input--unit-wrapper"> <div class="input--unit"><input class="radio-btn" type="radio" id="ppm" name="dosage-unit" value="ppm" checked><label for="ppm">ppm</label></div> <div class="input--unit"><input class="radio-btn" class="radio-btn" type="radio" id="wt" name="dosage-unit" value="wt%" ><label for="wt">wt%</label></div></div></div></div><div class="calc-item result"><span class="trade-mark">ULTRANOX</span> <span>626 &nbsp; Dosage</span><div id="ultra-dosage">0</div></div><div class="calc-item"><span>Current Phosphite Annual Vol</span><div class="input-wrapper"><input type="type" data-formula="annual" placeholder="Enter Annual Vol"><div class="input--unit-wrapper"><div class="input--unit"><input class="radio-btn" type="radio" id="kg" name="vol-unit" value="kg" checked><label for="kg">kg</label></div><div class="input--unit"><input class="radio-btn" type="radio" id="lbs" name="vol-unit" value="lbs"><label for="ppm">lbs</label></div></div></div></div><div class="calc-item result"><span class="trade-mark">ULTRANOX</span> <span>626 &nbsp; Annual Vol</span><div id="ultra-annual">0</div></div></div><button class="reset-calc" onclick="resetCalc()">Reset</button></div> <style> #grade-details-page #dosing-rate-calc { width: 720px; } #js-phosphite-calc.error { color: red; outline: 1px solid red; margin-left: 1px; } #grade-details-page #dosing-rate-calc #js-phosphite-value.error { color: red; } #grade-details-page #dosing-rate-calc .wrapper-dropdown { position: relative; width: 250px; padding: 6px 10px; background: #fff; border: 1px solid rgba(0,0,0,0.15); box-shadow: 0 1px 1px rgba(50,50,50,0.1); cursor: pointer; /* outline: none; */ } #grade-details-page #dosing-rate-calc .wrapper-dropdown span { display: block; } #grade-details-page #dosing-rate-calc .wrapper-dropdown:after { content: ""; width: 0; height: 0; position: absolute; right: 15px; top: 50%; margin-top: -3px; border-width: 6px 6px 0 6px; border-style: solid; border-color: #8aa8bd transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown { display: none; position: absolute; top: 45px; left: 0; right: 0; padding: 0; background: white; border-radius: inherit; border: 1px solid rgba(0,0,0,0.17); box-shadow: 0 0 5px rgba(0,0,0,0.1); font-weight: normal; -webkit-transition: all 0.5s ease-in; -moz-transition: all 0.5s ease-in; -ms-transition: all 0.5s ease-in; -o-transition: all 0.5s ease-in; transition: all 0.25s ease-in; list-style: none; /* Hiding */ opacity: 0; pointer-events: none; z-index: 50; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown:after { content: ""; width: 0; height: 0; position: absolute; bottom: 100%; right: 15px; border-width: 0 6px 6px 6px; border-style: solid; border-color: #fff transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown:before { content: ""; width: 0; height: 0; position: absolute; bottom: 100%; right: 13px; border-width: 0 8px 8px 8px; border-style: solid; border-color: rgba(0,0,0,0.1) transparent; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li a { display: block; padding: 10px; text-decoration: none; color: #8aa8bd; border-bottom: 1px solid #e6e8ea; box-shadow: inset 0 1px 0 rgba(255,255,255,1); -webkit-transition: all 0.3s ease-out; -moz-transition: all 0.3s ease-out; -ms-transition: all 0.3s ease-out; -o-transition: all 0.3s ease-out; transition: all 0.3s ease-out; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li i { float: right; color: inherit; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:first-of-type a { border-radius: 7px 7px 0 0; } #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:last-of-type a { border: none; border-radius: 0 0 7px 7px; } /* Hover state */ #grade-details-page #dosing-rate-calc .wrapper-dropdown .dropdown li:hover a { background: #f3f8f8; } /* Active state */ #grade-details-page #dosing-rate-calc .wrapper-dropdown.active .dropdown { display: block; opacity: 1; pointer-events: auto; } #grade-details-page #dosing-rate-calc .no-opacity .wrapper-dropdown .dropdown, #grade-details-page #dosing-rate-calc .no-pointerevents .wrapper-dropdown .dropdown { display: none; opacity: 1; /* If opacity support but no pointer-events support */ pointer-events: auto; /* If pointer-events support but no pointer-events support */ } #grade-details-page #dosing-rate-calc .no-opacity .wrapper-dropdown.active .dropdown, #grade-details-page #dosing-rate-calc .no-pointerevents .wrapper-dropdown.active .dropdown { display: block; } #grade-details-page #dosing-rate-calc h3 { font-family: 'pluto_sans_bold',Arial,sans-serif; font-size: 18px; line-height: 28px; letter-spacing: 1px; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .calc-row { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row wrap; flex-flow: row wrap; -webkit-box-align: start; -ms-flex-align: start; align-items: flex-start; } #grade-details-page #dosing-rate-calc .calc-item { margin-bottom: 35px; } #grade-details-page #dosing-rate-calc #ultra-dosage, #grade-details-page #dosing-rate-calc #ultra-annual { width: 320px; } #grade-details-page #dosing-rate-calc .input-wrapper { position: relative; display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-align: center; -ms-flex-align: center; align-items: center; width: 365px; } #grade-details-page #dosing-rate-calc #wt, #grade-details-page #dosing-rate-calc #pmp, #grade-details-page #dosing-rate-calc #kg, #grade-details-page #dosing-rate-calc #lb { background-color: transparent; border: unset; } #grade-details-page #dosing-rate-calc select, #grade-details-page #dosing-rate-calc input[type="type"] { width: 250px; padding: 0; padding-left: 10px; font-size: 21px; line-height: 40px; color: #54575A; } #grade-details-page #dosing-rate-calc select { display: block; height: 44px; border: 1px solid #EAECEE; } #grade-details-page #dosing-rate-calc input[type="type"] { margin-right: 2px; border: 1px solid #EAECEE; } #grade-details-page #dosing-rate-calc input[type="type"].error::placeholder { font-size: 16px; color:#e03e3e; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .radio-btn { -webkit-appearance: radio; margin-left: 10px; padding-left: 5px; color: #54575A; } #grade-details-page #dosing-rate-calc .radio-btn + label { margin: 0; color: #54575A; } #grade-details-page #dosing-rate-calc .radio-btn:checked + label { padding-left: 2px; font-weight: 600; color: #0099d8; } #grade-details-page #dosing-rate-calc .input--unit-wrapper { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row; flex-flow: row; } #grade-details-page #dosing-rate-calc .input--unit { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: horizontal; -webkit-box-direction: normal; -ms-flex-flow: row; flex-flow: row; align-items: center; } #grade-details-page #dosing-rate-calc #ultra-dosage, #grade-details-page #dosing-rate-calc #ultra-annual { width: 250px; padding: 0 10px; font-size: 21px; color: #54575A; line-height: 44px; background-color: #EAECEE; border-radius: 6px; } #grade-details-page #dosing-rate-calc .calc-item span { font-size: 14px; font-weight: 600; line-height: 32px; color: #415055; text-transform: uppercase; } #grade-details-page #dosing-rate-calc .result { width: 250x; margin-left: 45px; } #grade-details-page #dosing-rate-calc .trade-mark { position: relative; margin-right: 23px; } #grade-details-page #dosing-rate-calc .trade-mark::after { position: absolute; top: -13px; right: -17px; content: "TM"; font-size: 9px; } #grade-details-page #dosing-rate-calc .reset-calc { margin-top: 5px; padding: 0 51px; font-size: 14px; line-height: 43px; color: white; text-transform: uppercase; background-color: #0099D8; border: unset; } #grade-details-page #dosing-rate-calc #over-ride-selectjs { width: 250px; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxItText { position: relative; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxItText.error { position: absolute; bottom: -4px; left: 0; color: #e03e3e; } #grade-details-page #dosing-rate-calc #clac-overSelectBoxIt:focus { margin-left: 1px; outline: 1px solid red; } @media (max-width: 719px) { #dosing-rate-calc { width: 500px; } .result { margin-left: 0; } .input-wrapper { display: -webkit-box; display: -ms-flexbox; display: flex; -webkit-box-orient: vertical; -webkit-box-direction: normal; -ms-flex-flow: column; flex-flow: column; -webkit-box-align: start; -ms-flex-align: start; align-items: flex-start; } .input--unit-wrapper { margin-top: 5px; } } @media (max-width: 1054px) { #grade-details-page #dosing-rate-calc .calc-row { flex-flow: column; } #grade-details-page #dosing-rate-calc .result { margin-left: 0; } #grade-details-page #dosing-rate-calc .input-wrapper { align-items: flex-start; } } </style> <script> document.addEventListener("DOMContentLoaded", function(){ let currentPhosphite = 0; const ultraPhosphite = 0.103; let dosageWT = false; let dosagePPM = true; let annualVolKG = true; let annualVolLBS = false; let dosage = ""; let annualVol = ""; let unit = ""; let roundedDosage = 0; let finalCount = 1; const calc = document.getElementById("dosing-rate-calc"); const dosageOutput = document.getElementById("ultra-dosage"); const annualOutput = document.getElementById("ultra-annual"); // gather values const radioBtns = [...calc.getElementsByClassName("radio-btn")]; const inputTypes = [...calc.querySelectorAll('[type="type"]')]; let phosGather = document.getElementById("js-phosphite-value"); // data-formula getPhosVal = () => { phosGatherVal = phosGather.innerHTML; // console.log(phosGather); switch (phosGatherVal) { case 'ALK240/168': currentPhosphite = 0.048; break; case 'TNPP': currentPhosphite = 0.044; break; case 'Doverphos 9228': currentPhosphite = 0.073; break; case 'Adekastab PEP-36': currentPhosphite = 0.098; break; case 'Hostanox PEP-Q': currentPhosphite = 0.0590; break; } // console.log("updated phos " + currentPhosphite); return currentPhosphite; } // ULTRANOX 626 Dosage = (Current Phos % / U626 Phos %) x (Current Phos dose) // https://www.rapidtables.com/convert/number/Percent_to_PPM.html#how ultraDosage = (e) => { let currentDosageUnit = dosagePPM ? " ppm" : "%"; if (dosage === "") { // console.log("in Ultra enter doage"); } else { currentPhosphite = getPhosVal(); // console.log("in Ultra line65 phosPhite Value " + currentPhosphite); if (currentPhosphite === 0) { // console.log("zero"); phosGather.innerHTML = "Select your Current Phosphite"; // phosGather.style.fontSize ="10px"; phosGather.classList.add("error"); document.getElementById("js-phosphite-calc").classList.add("error"); phosGather.focus(); resetCalc(); return; } // phosGather.style.fontSize ="unset"; phosGather.classList.remove("error"); document.getElementById("js-phosphite-calc").classList.remove("error"); // console.log(`in Ultra ${currentPhosphite} / ${ultraPhosphite} x ${dosage}`); finalCount = ((currentPhosphite / ultraPhosphite) * dosage); // console.log("in Ultra final count " + finalCount); roundedDosage = Math.round(finalCount * 100) / 100; console.log("in Ultra currentUnit " + currentDosageUnit); dosageOutput.innerHTML = roundedDosage + currentDosageUnit; } } //https://www.rapidtables.com/convert/weight/kg-to-pound.html ultraAnnual = (e) => { let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (annualVol === "") { console.log("enter annual vol"); } else { currentPhosphite = getPhosVal(); if (currentPhosphite === 0) { console.log("zero"); phosGather.innerHTML = "Select your Current Phosphite"; phosGather.style.fontSize ="10px"; phosGather.classList.add("error"); phosGather.focus(); resetCalc(); return; } phosGather.style.fontSize ="unset"; phosGather.classList.remove("error"); finalCount = ((currentPhosphite / ultraPhosphite) * annualVol); roundedDosage = Math.round(finalCount * 100) / 100; annualOutput.innerHTML = roundedDosage + currentAnnualUnit; } } convert = (val, unit) => { let value = 0; if (unit === "%") { value = val / 10000; dosage = value; } else if (unit === "ppm") { value = 10000 * val; dosage = value; } else if (unit === "kg") { value = val * 0.45359237; //lbs to kg annualVol = value; } else if (unit === "lbs") { value = val / 0.45359237; //kg to lbs annualVol = value; } else { value= "error"; } // value = Math.round(value * 100) / 100; return value; } getInputValues = () => { inputTypes.forEach(function(el) { el.addEventListener('change', function(e) { let currentDosageUnit = dosagePPM ? " ppm" : "%"; let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (el.dataset.formula === "dosage") { dosage = event.target.value; if(isNaN(dosage)) { el.value = "Numbers only"; el.style.color = "red"; return; } else { el.style.color = "#54575A"; el.value = dosage + currentDosageUnit; } if ( dosageWT && dosage > 100 ) { el.value = ""; el.placeholder = "enter dosage max 100%"; el.classList.add("error"); el.style.fontSize = "16px"; dosageOutput.innerHTML = "0"; return; } else { el.placeholder = "Enter Dosage"; // el.style.color = "#54575A"; el.classList.remove("error"); el.style.fontSize = "21px"; } ultraDosage(); } else if (el.dataset.formula === "annual") { annualVol = event.target.value; if(isNaN(annualVol)) { el.value = "Numbers only"; el.style.color = "red"; return; } else { el.style.color = "#54575A"; el.value = annualVol + currentAnnualUnit; } console.log("in getInputValue currentUnit " + currentDosageUnit); ultraAnnual(); } }); }); } changeUnit =(type, unit) => { inputTypes.forEach(function(el) { let currentDosageUnit = dosagePPM ? " ppm" : "%"; let currentAnnualUnit = annualVolKG ? " kg" : " lbs"; if (el.dataset.formula === "dosage" && type === "dosage") { if (el.value === "") { el.value = ""; el.placeholder = "Enter Dosage in " + unit; } else { console.log("inChange dosage before " + dosage); console.log("inChange unit sending to convert " + unit); console.log("inChangedosage before " + dosage); dosage = convert(dosage, unit); console.log("inChangedosage converted " + dosage); // el.value = dosage + currentDosageUnit; el.value = (Math.round(dosage * 100) / 100) + currentDosageUnit; console.log("inChange el value " + el.value + "sending to ultra"); ultraDosage(); } } else if (el.dataset.formula === "annual" && type === "annual") { if (el.value === "") { el.value = ""; el.placeholder = "Enter Vol in " + currentAnnualUnit; } else { // inputVal = el.value; annualVol = convert(annualVol, unit); el.value = (Math.round(annualVol * 100000) / 100000) + currentAnnualUnit; // el.value = annualVol + currentAnnualUnit; ultraAnnual(); } } }); } updateRadioCheck = (oldUnit, newUnit) => { radioBtns.forEach(function(el) { }); } getRadioBtnValues = () => { radioBtns.forEach(function(el) { el.addEventListener('change', function() { let currentDosageUnit = dosagePPM ? " ppm" : "%"; if (el.checked) { let radio = el.getAttribute("value"); switch(radio) { case 'wt%': // debugger; dosageWT = true; dosagePPM = false; console.log("in getRadioBtn currentUnit " + currentDosageUnit); changeUnit("dosage", "%"); break; case 'ppm': dosagePPM = true; dosageWT = false; changeUnit("dosage", "ppm"); break; case 'kg': annualVolKG = true; annualVolLBS = false; changeUnit("annual", "kg"); break; case 'lbs': annualVolLBS = true; annualVolKG = false; changeUnit("annual", "lbs"); break; } } }) }); } function DropDown(el) { this.dd = el; this.placeholder = this.dd.children('span'); this.opts = this.dd.find('ul.dropdown > li'); this.val = ''; this.index = -1; this.initEvents(); } DropDown.prototype = { initEvents : function() { var obj = this; obj.dd.on('click', function(event){ $(this).toggleClass('active'); return false; }); obj.opts.on('click',function(){ var opt = $(this); obj.val = opt.text(); obj.index = opt.index(); obj.placeholder.text(obj.val); }); }, getValue : function() { return this.val; }, getIndex : function() { return this.index; } } $(function() { var dd = new DropDown( $('#js-phosphite-calc') ); $(document).click(function() { // all dropdowns $('#js-phosphite-value').addClass('active'); // resetValues(); }); }); document.getElementById("js-phosphite-value").addEventListener('click', function() { resetValues(); }) resetValues = () => { inputTypes.forEach(function(el) { el.value = ""; }); dosageOutput.innerHTML = "0"; annualOutput.innerHTML = "0"; // getRadioBtnValues(); dosageWT = false; dosagePPM = true; annualVolKG = true; annualVolLBS = false; currentPhosphite = 0; radioBtns.forEach(function(el) { if (el.id === "ppm" || el.id === "kg") { el.checked = true; } else { el.checked = false; } }); console.log("in reset Values - cleared values"); } resetCalc = () => { resetValues(); document.getElementById("js-phosphite-value").innerHTML = "Select your option"; } resetCalc(); getRadioBtnValues(); getInputValues(); });// end of DocumentLoad </script> Appearance: White granule Melting Point: 170-180 °C Acid Number: 1.0 mg KOH/g Free 2,4-di-t-butylphenol Content: 1.0% max Phosphorus Content: 10.0-10.3% Triisopropanolamine Content: 0.5-1.0% Molecular Weight: 604 g/mol Flash Point (Closed Cup): 168 °C Bulk Density @ 20 °C: 0.56 g/ml Food contact approvals Excellent color stability during compounding, fabrication and end use Improved gas fading performance Synergizes with benzophenone and benzotriazole light stabilizers High performance at low load rates Non-dusting Polyolefins, styrenics, engineering thermoplastics

ULTRANOX™ 627AV

characteristics.

High performance solid phosphite antioxidant that improves color stability and reduces polymer degradation during compounding, fabrication, and end use in a variety of resins. Similar to ULTRANOX™ 626 but in a free-flowing form with an inorganic neutralizer for improved handling...

ULTRANOX™ 627A is a solid organophosphite antioxidant that improves gas fading performance and color stability during compounding, fabrication, and end use. It delivers high performance at low loading rates, making this a cost effective addition to polymer formulas. ULTRANOX™ 627A synergizes with benzophenone and benzotriazole light stabilizers. Appearance: White granule Melting Point: 160-175 °C Acid Number: 1.0 mg KOH/g Free 2,4-di-t-butylphenol Content: 1.5% Phosphorus Content: 9.1% DHT-4A Content: 6.0-8.0% Molecular Weight: 604 g/mol Flash Point (Closed Cup): > 100 °C Bulk Density @ 20 °C: 0.51 g/ml Particle Size Distribution: 95% greater than 60 mesh Food contact approvals Excellent color stability during compounding, fabrication and end use Improved gas fading performance Synergizes with benzophenone and benzotriazole light stabilizers High performance at low load rates Non-dusting Polyolefins, engineering thermoplastics, styrenics

ULTRANOX™ 813

ULTRANOX™ 813

W, Powder

General use grade, metal powder lubricant. Most cost effective grade.

The zinc salt distilled from hydrogenated fatty acids. Usually found in paints, lacquers and industrial coatings. Appearance: White powder Melting Point: 120 °C Boiling Point: 160 °C Insoluble in H2O A good lubricant to use in polyethylene and other polymers. Also used as dust-on anti blocks for sticky rubbers or plastics. In adhesives Can be in contact with aqueous and fatty foods when a component of paper Use as lubricant Good for rubber articles

WESTON™ DPP

Diaryl phosphite ester antioxidant with a high phosphorus content and relatively low molecular weight. Improves color and light stability in polymers that do not require food contact.

WESTON™ DPP is a phosphite ester antioxidant that improves color and light stability in polyolefins and other polymers that do not require food contact approvals. It has a high phosphorus content, relatively low molecular weight and can be used to prevent plate-out in PVC. Appearance: Clear liquid Specific Gravity @ 25 °C: 1.200-1.220 Acid Number: 15.0 mg KOH/g Refractive Index @ 25 °C: 1.5550-1.5575 Phosphorus Content: 11.6-12.0% Color (APHA, Pt/Co): 50 max Molecular Weight: 234 g/mol Flash Point (Closed Cup): 143 °C Viscosity @ 38 °C: 10.5 cps Density @ 25 °C: 1.21 g/mL Vapor Pressure @ 5 mm Hg: 140 °C Soluble: Most common aprotic organic solvents Insoluble: Water, with hydrolyze in the presence of water Prevents plate-out in PVC Unsaturated polyesters

WESTON™ 398

Versatile phosphite stabilizer that improves color, processing stability, and end-use of a variety of polymers.

WESTON™ 398 is a phosphite antioxidant that improves color and processing stability during recovery, drying, compounding, processing and end use. It has low nonylphenol content and synergizes when used along side hindered phenolic antioxidants. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.980-0.992 Color (Pt - Co): 75 max Flash Point (Closed Cup): 196 °C Density @ 25 °C: 0.98 g/mL Vapor Pressure @ 6 mm Hg: 245 °C Molecular Weight: 688 g/mol Viscosity @ 60 °C: 250 cps Acid Number: 0.25 mg KOH/g Refractive Index @ 25 °C: 1.5250-1.5280 Free Nonylphenol Content: ≤0.1 Phosphorus Content: 4.1-4.5% Chlorine Content: < 25 ppm Free Phenol Content: < 50 ppm Specific Heat: 0.4 mcal/mg°C Thermal Conductivity: 0.0003 gcal/sec(cm²)(°C/cm) Auto-ignition Temperature: 439 °C Low color Low nonylphenol content Synergizes when used along side phenolic antioxidants High density polyethylene, linear low density polyethylene

WESTON™ 399

Versatile phosphite stabilizer that improves color, processing stability, and end-use of a variety of polymers; similar to WESTON™ 398 but with food contact approvals.

WESTON™ 399 is a phosphite antioxidant that improves color and processing stability during recovery, drying, compounding, processing and end use. It has low nonylphenol content, is approved for food contact, and synergizes when used along side hindered phenolic antioxidants. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.980-0.992 Color (Pt - Co): 75 max Flash Point (Closed Cup): 196 °C Density @ 25 °C: 0.98 g/mL Vapor Pressure @ 6 mm Hg: 245 °C Molecular Weight: 688 g/mol Viscosity @ 60 °C: 250 cps Acid Number: 0.25 mg KOH/g max Refractive Index @ 25 °C: 1.5250-1.5280 Free Nonylphenol Content: 4.0% max Phosphorus Content: 4.1-4.5% Chlorine Content: <25 ppm Free Phenol Content: <50 ppm Specific Heat: 0.4 mcal/mg°C Thermal Conductivity: 0.0003 gcal/sec(cm²)(°C/cm) Auto-ignition Temperature: 439 °C Low color Low nonylphenol content Food contact approvals Synergizes when used along side phenolic antioxidants High density polyethylene, linear low density polyethylene

WESTON™ 618F

Highly effective, phosphite-based color and molecular weight stabilizer for polymers, elastomers, and adhesives.

WESTON™ 618F is a phosphite antioxidant that is highly effective at stabilizing color and molecular weight for a variety of polymers, elastomers, and adhesives. WESTON™ 618F contributes to the thermal and UV stability of these materials as well. Appearance: White flakes Specific Gravity @ 15.5 °C: 0.92-0.935 Acid Number: 1.0 mg KOH/g Refractive Index @ 60 °C: 1.456-1.459 Phosphorus Content: 7.8-8.2% Flash Point (Closed Cup): 185 °C Bulk Density: 0.43 g/mL Melting Point: 37-46 °C Molecular Weight: 732 g/mol Food contact approvals Excellent color stability during processing, fabrication, and end use Synergizes when used with benzophenone and benzotriazole light stabilizers Reduced discoloration of polymers containing pigments like TiO₂ High performance at low loading levels Reduces discoloration of polymers with high processing temperatures that are stabilized with a sulfur-containing, nickel-organic complex Polyolefins, polyesters, elastomers, styrenics, engineering thermoplastics, and adhesives

WESTON™ 619F

Highly effective, phosphite-based color and molecular weight stabilizer for polymers, elastomers, and adhesives, similar to WESTON™ 618F but with improved hydrolytic stability.

WESTON™ 619F is a phosphite antioxidant similar to WESTON™ 618F with improved hydrolytic stability. It is highly effective at stabilizing color and molecular weight for a variety of polymers, elastomers, and adhesives. WESTON™ 619F contributes to the thermal and UV stability of these materials as well. Appearance: White flakes Specific Gravity @ 15.5 °C: 0.92-0.935 Acid Number: 1.0 mg KOH/g Refractive Index @ 60 °C: 1.456-1.459 Phosphorus Content: 7.8-8.2% Flash Point (Closed Cup): 188 °C Bulk Density: 0.43 g/mL Melting Point: 37-46 °C Molecular Weight: 732 g/mol Food contact approvals Excellent color stability during processing, fabrication, and end use Synergizes when used with benzophenone and benzotriazole light stabilizers Reduced discoloration of polymers containing pigments like TiO₂ High performance at low loading levels Reduces discoloration of polymers with high processing temperatures that are stabilized with a sulfur-containing, nickel-organic complex Polyolefins, polyesters, elastomers, styrenics, engineering thermoplastics, and adhesives

WESTON™ 705

Nonylphenol-free phosphite antioxidant, designed as a drop-in replacement for TNPP with a 20% lower loading rate.

WESTON™ 705 is an industry pioneering phosphite stabilizer which is free of nonylphenol. It can be used in a variety of polymer systems such as HDPE, LLDPE, SBR, NBR, SBC, SBS, ABS, PVC. WESTON™ 705 reduces both plate-out and gel formation by a factor of 10. Based on proprietary chemistry and technology, it has been developed to replace TNPP in food-contact applications. Appearance: Colorless liquid free of particulates Phosphorus Content: 5.2% Assay: > 98% Specific Gravity (@ 25°C, @ 15°C): 1.004, 1.035 Acid Number: <0.5 mg KOH/g Nonylphenol-free Drop-in replacement for TNPP, able to reduce loading by 20% while matching TNPP performance Superior solubility in PE Compared to AO168/ALKANOX® 240: Tenfold reduction in plate-out Tenfold reduction in gel formation 90% less additive blooming Threefold improvement in melt flow retention allows for increased usage of regrind Threefold improvement in color retention upon exposure to NOx gas Broad food contact approvals Food packaging

WESTON™ 705T

Nonylphenol-free phosphite antioxidant, designed as a drop-in replacement for TNPP with a 20% lower loading rate. Similar to WESTON™ 705 but with improved hydrostability.

WESTON™ 705T is an industry pioneering phosphite stabilizer which is free of nonylphenol. It can be used in a variety of polymer systems such as HDPE, LLDPE, SBR, NBR, SBC, SBS, ABS, PVC. Based on proprietary chemistry and technology, it has been developed to replace TNPP in food-contact applications. It has improved hydrostability when compared to WESTON™ 705. Appearance: Colorless liquid free of particulates Phosphorus Content: 5.0% Assay: >98% Specific Gravity @ 25 °C: 1.004-1.035 Acid Number: <0.5 mg KOH/g TIPA Content: 0.5% Nonylphenol-free Drop-in replacement for TNPP, able to reduce loading by 20% while matching TNPP performance Superior solubility in PE Compared to AO168/ALKANOX® 240: Tenfold reduction in plate-out Tenfold reduction in gel formation 90% less additive blooming Threefold improvement in melt flow retention allows for increased usage of regrind Threefold improvement in color retention upon exposure to NOx gas Broad food contact approvals Food packaging

WESTON™ PDDP

Alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polymers that do not require food contact approvals. Similar to WESTON™ DPDP, but with a higher molecular weight and lower phosphorus content.

WESTON™ PDDP is an alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polycarbonate, polyurethanes, ABS polymers, PET fibers, and coatings. It also functions as a secondary antioxidant in PVC. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.938-0.947 Acid Number: 0.05 mg KOH/g Refractive Index @ 25 °C: 1.4780-1.4810 Phosphorus Content: 7.1% Color (APHA, Pt/Co): 50 max Molecular Weight: 438 g/mol Flash Point (Closed Cup): 182 °C Viscosity @ 38 °C: 12.0 cps Density @ 25 °C: 0.94 g/mL Vapor Pressure @ 5 mm Hg: 190 °C Soluble: Most common aprotic organic solvents Insoluble: Water Functions as a secondary antioxidant for color and heat stability in PVC PET fiber

WESTON™ TNPP

Versatile phosphite stabilizer that improves color, processing stability, and end-use of a variety of polymers; similar to WESTON® 399, but with a higher flash point.

WESTON™ TNPP is a cost-effective phosphite antioxidant that improves color and processing stability during recovery, drying, compounding, processing and end use. It has low nonylphenol content, is approved for food contact, and synergizes when used along side hindered phenolic antioxidants. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.980-0.992 Color (Pt - Co): 75 max Flash Point (Closed Cup): 207 °C Density @ 25 °C: 0.98 g/mL Vapor Pressure @ 6 mm Hg: 245 °C Molecular Weight: 688 g/mol Viscosity @ 60 °C: 250 cps Acid Number: 0.05 mg KOH/g Refractive Index @ 25 °C: 1.5250-1.5280 Free Nonylphenol Content: 3.0% Phosphorus Content: 4.1-4.5% Chlorine Content: < 25 ppm Free Phenol Content: < 50 ppm Specific Heat: 0.4 mcal/mg°C Thermal Conductivity: 0.0003 gcal/sec(cm²)(°C/cm) Auto-ignition Temperature: 439 °C Low color Low nonylphenol content Synergizes when used along side phenolic antioxidants Food contact approvals High density polyethylene, linear low density polyethylene

WESTON™ TPP

Versatile aryl phosphite ester antioxidant that regulates viscosity, improves color, and prevents scorch in a variety of polymers.

WESTON™ TPP is a phosphite ester antioxidant that can be used in a variety of materials, including adhesives, coatings, styrenics, and polyurethanes to improve color stability, prevent scorch, and regulate viscosity. Acts as a catalyst adjuvant when used in polyolefins. Appearance: Clear liquid Specific Gravity @ 25 °C: 1.180-1.186 Acid Number: 0.20 mg KOH/g max Refractive Index @ 25 °C: 1.5880-1.5900 Phosphorus Content: 10% Color (APHA, Pt/Co): 50 max Molecular Weight: 310 g/mol Flash Point (Closed Cup): 146 °C Viscosity @ 38 °C: 10.2 cps Density @ 25 °C: 1.18 g/mL Vapor Pressure @ 5 mm Hg: 205 °C Soluble: Most aprotic organic solvents Insoluble: Water Regulates viscosity and improves color stability in polyester Catalyst adjuvant in polyolefins Prevents scorch during curing in polyurethanes Styrenics, engineering thermoplastics

Zinc Stearate 42

Zinc Stearate 42 is the zinc salt of distilled hydrogenated fatty acids.

Zinc stearate is a metal salt of a fatty acid. PMC Biogenix offers zinc stearate in both precipitated and fused forms in a wide variety of end use applications. Total ash: 13.00-15.00 Fineness, % thru 325 mesh: 99.80-100.00 Free fatty acids (as stearic): 0.00-2.00 Water: 0.00-1.00% Water soluble salts: 0.00-0.50 Soluble in many oils and waxes such as turpentine, benzene, toluene, xylene, and vegetable oils Low temperature solubility Zinc Stearate 42 is often used as a lubricant alongside urea and melamine-formaldehyde resins in fiber-reinforced polyesters and copy toners.