There are no products found that meet this criteria.

• 

  132

  This aluminum salt derived from distilled, hydrogenated fatty acids is designed for protective and decorative coatings. Has the highest free fatty acid content and lowest aluminum metal content.

  This product has strong lubrication characteristics, thickening ability, thermal stability, and water-repellent characteristics. Total Ash: 5.50 – 7.50 Fineness % Thru 20 Mesh: 100.00 (Min) Fineness % Thru 200 Mesh: 90.00 – 100.00 Free Fatty Acids (As Stearic): 25.0 – 35.0 Water: 0.00 – 1.00 Water Soluble Salts: 0.00 – 1.00 Yields the lowest viscosity increase. Great for dry lubrication and thickening of ink manufacture. It is commonly used in the production of coatings(protective and decorative) such as paints, enamels, varnishes, and lacquers. additionally, it acts as a dry lubricant in metal processing and as a water repellents.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 25lb Bag

• 

  ANOX® 1315

  Low viscosity liquid phenolic antioxidant with some FDA approvals.

  ANOX® 1315 is a highly effective, non-discoloring, liquid antioxidant. It is ideal for a variety of polymers, engine and cutting lubricating oils, and polyols used in polyurethane foams for both storage and scorch protection. Appearance: Viscous, clear yellow liquid Melting Point: -56 °C Specificity Gravity (@ 20 °C): 0.94 g/cm³ Viscosity (@30 °C): ~200 mPa · s Flash Point: 229 °C Liquid form FDA approvals for use in specific polymers Low viscosity allows for extra easy handling High antioxidant efficiency in many different polymers including polyolefins, synthetic rubbers, PVC, polyols (PU) and lubricant oils

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 418.87lb Drum

• 

  ANOX® 20 Granular

  High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging. Similar to ANOX® 20 Powder, but in granular form.

  ANOX® 20 Granular is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 570 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 1102.3lb Supersac, 1102.3lb Supersac, 44.09lb Bag

• 

  ANOX® 20 Powder

  High molecular weight hindered phenolic primary antioxidant. Effective as a process stabilizer, but is especially powerful at preventing polymer degradation during long-term aging.

  ANOX® 20 Powder is a high molecular weight hindered phenolic antioxidant that primarily functions as a polymer stabilizer preventing degradation in long-term aging. Also provides defense against polymer degradation and discoloration during processing. Ethanox 310 has been rebranded to ANOX® 20. Appearance: White free-flowing powder Molecular Weight: 1178 g/mol Bulk Density: 650 kg/m3 Melting Point: 110-125 °C Flash Point: 299 °C Non-blooming Excellent resistance to extraction from polymer compounds Synergizes with phosphites like Alkanox 240, Weston 705, and TNPP Prevents processing-induced degradation AND degradation from long-term aging Prevents discoloration at high processing temperatures Broad food-contact approvals CAS equivalent to Ethanox 310 and Irganox 1010 Available in powder, granular, non-dusting pellet form, alone and in binary blends Food packaging, automotive underhood, wire and cable

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 1102.3lb Supersac, 44.09lb Bag

• 

  ANOX® PP18 NDB

  High molecular weight hindered phenolic antioxidant, provides effective protection against polymer degradation during processing and in long term aging in many polymer systems.

  ANOX® PP18 stabilizer effectively reduces oxidative degradation of most polymers during processing and end-use application. It is ideal for polyolefins, styrenics, block co-polymers, elastomers, adhesives, PVC, and polyurethanes. It is available in granular, powder, and non-dusting blend form. Appearance: White pellets Melting Point: 50-55 °C Flash Point: 273 °C Molecular Weight: 531 g/mol Non-dusting Broad food-contact approvals

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 1100lb Supersac, 44.09lb Bag

• 

  ANOX® PP18 Powder

  High molecular weight hindered phenolic antioxidant, provides effective protection against polymer degradation during processing and in long term aging in many polymer systems.

  ANOX® PP18 stabilizer effectively reduces oxidative degradation of most polymers during processing and end-use application. It is ideal for polyolefins, styrenics, block co-polymers, elastomers, adhesives, PVC, and polyurethanes. It is available in granular, powder, and non-dusting blend form. Appearance: White, free flowing solid Melting Point: 50-55 °C Flash Point: 273 °C Molecular Weight: 531 g/mol Bulk Density: 570 kg/m³ Available in multiple forms (powder, granular, non-dusting blend) Broad food-contact approvals

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 44.09lb Bag

• 

  Armeen® 18D, Flake

  Octadecylamine used as processing aid in wax emulsions, hydrophobing agent for silica, chemical intermediates and optimal filming amine for corrosion inhibitor

  Used as an emulsifying agent, thickener, filming and boundary lubrication Equivalent weight: 269 Appearance at 25C: Solid Melting Point (C): 46 Flash Point (C): >150 Vapor Pressure (mm Hg @20C): <0.1 Specific Gravity (C): 0.791(60), 0.784(70) Chain Length: C18 HLB (Davies Scale 0-40): 8 Viscosity (SSU): 43.5(55), 42.2(65), 39.9(75) Solubility of H2O% (C): 9.3(65), 7.5(70), 4.0(80) Specific Heat (BTU/Lb/F): 0.54 pKb in Water: 3.4 Initial Boiling Point (C): 2(166), 8(196), 32(232), 349(760) Excellent in mold release applications Requires lower temperatures Reduces post mold shrinkage and weight loss and less susceptible to blistering. Facilitate filler and pigment dispersion in paints and inks

  Manufacturer: Nouryon | Product Line: Nouryon Nitrogen Derivatives | Package Sizes: 200lb Drum

• 

  Armoslip 18 LF Beads

  Armoslip 18 LF beads are stearamides with typical usage in caps and closures or in rubbers and inks

  These fatty amides provide a range of plastic additives, wax additives and lubricants to various plastics applications Free Fatty Acid .05% Max (as Stearic Acid) Assay 98.5% Min Moisture 0.1% Max Iodine value (g I₂/100 g): 3 max Melting point: 99-109°C Excellent anti-blocking activity Facilitates over-printing and wet-printing Water soluble

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides

• 

  Armoslip E, Beads

  Armoslip E beads are formulated from refined rapeseed oil and offers excellent slip effects and provides good anti-blocking performance

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Assay 98.5% Min Free Fatty Acid Content 0.2% Max Moisture 0.05% Max Iodine Value 74 Min 79 Max (g I₂/100 g Melting point 80-84°C Rapeseed oil based Low volatility and high temperature stability

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 44.092lb Bag

• 

  Armoslip® CP - Beads

  Armoslip® CP is formulated from refined oleamides and provides excellent slip effect and has a moderate performance when used for anti-blocking

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Iodine Value 84 Moisture .25% Max Amide 98% Min Bead form allows for easy transportation Insoluble in water

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 20kg Bag, 44.092lb Bag

• 

  CELOGEN® 754A

  Chemical foaming agent for thermoplastics and rubber with a moderate decomposition temperature that does not require the addition of an activator.

  CELOGEN® 754A is a chemical blowing agent designed for rubber and thermoplastics. It contains an effective activation system; adding strong activators such as zinc oxide, zinc stearate or ACTICELL® U is unnecessary unless lowering the decomposition temperature is desired. Appearance: Yellow-orange powder Specific Gravity @25 °C: 1.68 Decomposition Point: 165-180 °C Gas Yield: 200 ml/g Decomposition Gases: N₂, CO₂, CO, NH₃ Soluble: Alkaline solutions Insoluble: Most organic solvents, water Non-discoloring Decomposition residue is white Contains an effective activation system Natural and synthetic rubbers, thermoplastics, ethylene vinyl acetate, shoe soles, automotive extrusions

  Manufacturer: CelChem LLC | Product Line: Celogen® Chemical Foaming Agents | Package Sizes: 55.11lb Bag

• 

  Eastman DTBHQ Crystalline

  Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).

  Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.

  Manufacturer: Eastman | Product Line: Eastman Hydroquinone And Derivatives | Package Sizes: 154.322lb Drum

• 

  Eastman MTBHQ Dry

  Secondary inhibitor (co-inhibitor) and antioxidant for nonfood fats and oils.

  Eastman™ MTBHQ (mono t-butyl hydroquinone) is commonly used as a polymerization inhibitor and antioxidant in many industrial applications. Effective in higher temperatures due to its higher solubility and potency compared to unsubstituted hydroquinone. Appearance: Light tan solid Flash point: 171°C (340°F) Boiling point: 295°C (563°F) Melting point: 125°C (257°F) Specific gravity 20°C/20°C: 1.05 Molecular weight: 166.22 CAS: 1948-33-0 Very effective polymerization inhibitor Good performing antioxidant in unstable organic liquids Excellent performance as a heat and stabilizer for pressure-sensitiveness adhesives Used as a polymerization inhibitor and industrial antioxidant in many applications.

  Manufacturer: Eastman | Product Line: Eastman Hydroquinone And Derivatives | Package Sizes: 55lb Bag

• 

  Eastman™ THQ Toluhydroquinone

  Highly effective process inhibitor used in the production of highly reactive unsaturated polyesters.

  Eastman™ THQ (Toluhydroquinone) is a tan to white crystalline solid that goes through similar chemical reactions as Hydroquinone. However, due to the presence of a methyl group in the ortho position, THQ becomes a highly active inhibitor in the free radical polymerization of vinyl monomers and unsaturated polyesters. Appearance: Off-white solid Flash point: 172°C (342°F) Boiling point: 279°C (534°F) Melting point: 127°C (261°F) Specific gravity: 1.3 Molecular weight: 124.13 CAS: 95-71-6 Better solubility in styrene than Hydroquinone Highly effective cook stabilizer in unsaturated polyesters Good performing antioxidant for oleates, linseed oil, and other nonfood fats and oils Used as an inhibitor, antioxidant, and intermediate manufacturing.

  Manufacturer: Eastman | Product Line: Eastman Hydroquinone And Derivatives | Package Sizes: 110.23lb Drum

• 

  FG

  This stearate's grade is a fine grind and fused.

  Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. APPEARANCE: WHITE POWDER FINENESS - THRU 200 MESH %: 95.0-100.0 FREE FATTY ACIDS (AS STEARIC) %: 0.0-0.5 TOTAL ASH %: 11.0-12.0 WATER %: 0.0-3.2 Great for PVC formulations, polypropylenes, and polyolefins.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 50lb Bag

• 

  FN Powder

  A fused stearate derived from hydrogenated fatty acids. Used as a catalyst neutralizer in polypropylenes.

  Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. Total Ash: 9.30 – 11.50 Fineness, % Thru 325 Mesh: 85.00 – 100.00 Free Fatty Acids: 0.00 – 1.00 Water %: 0.00 – 3.50 Appearance: White Powder Catalyst neutralizer Lubrication in polypropylene's Anti-static agent and acid scavenger in PVC Calcium Stearate FN Powder is a wide variety of applications ranging from waterproofing/ water repelling fabric, stops caking in dehydrated vegetables, as well as a stabilizer in PVC production.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 50lb Bag, 50lb Bag, 50lb Bag

• 

  Kemamide® E Ultra, Bead

  Formulated from unsaturated fatty primary monoamide from vegetable sources and demonstrates excellent color stability

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Amide 98% Gardner Color: 1 Closed Tube Melt Point: 82 °C Water: 0.05% Does not contain Phthalates or BPA Available in bags, drums, and bulk sacks

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum, 1999.5722lb Supersac, 50lb Bag

• 

  Kemamide® S, Bead

  Formulated from Stearic Acid, this product is a saturated fatty primary monoamide and is most commonly used for its anti-block properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® S, Powder

  Same as Kemamide® S Bead, in powder form.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 98.0 108.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 0.0 – 3.0 Water %: 0.00 – 0.25 Exceptional stability to air and light Insoluble in water and most organic solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum, 50lb Bag

• 

  Kemamide® U, Powder

  Same as Kemamide® U Pastille, in powder form

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 97.0 – 100.0 Closed Tube Melt Point °C: 68.0 – 78.0 Gardner Color (1963): 0.0 – 2.0 Iodine Value: 72.0 – 90.0 Water %: 0.00 – 0.20 Low solubility in water Available in multiple forms

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® VO, Bead

  Derived from oleic acid from vegetable sources, this product is an unsaturated fatty primary amide

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  Kemamide® VO, Powder

  Same as Kemamide® VO Bead, in powder.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Number: 0.00 – 1.00 Amide %: 98.0 – 100.0 Closed Tube Melt Point °C: 65.0 – 80.0 Gardner Color (1963): 0.0 – 2.0 Heat Stability 205°C: 0.0 – 4.0 Iodine Value: 80.0 – 99.0 Water %: 0.00 – 0.20 Low solubility in water FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 25kg Bag, 55lb Bag

• 

  Kemamide® W-20, Pellet

  Synthetic wax with a relatively high melting point and excellent slip properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® W-20, Prill

  Synthetic wax with a relatively high melting point and excellent slip properties.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 10.0 Closed Tube Melt Point °C: 114.0 – 120.0 Gardner Color (1963): 0.0 – 5.0 Total Amine Value: 0.00 – 10.00 High melting point FDA approved for a variety of applications

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 100lb Drum

• 

  Kemamide® W-40 DF, Prill

  This product is a wax that benefits calendering processes, injection and blow molding, and extrusion processing.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 Compatible with a wide variety of waxes and plasticizers Increases surface's resistance to salt, heat, moisture, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® W-40 Prill

  Formulated from stearic acid, this is used a synthetic wax, as a process lubricant.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 7.0 Total Amine Value: 0.00 – 2.00 Gardner Color (1963): 0.0 – 3.0 Closed Tube Melt Point: 140.0 – 145.0 Water %: 0.00 – 0.20 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  Kemamide® W-40, Powder

  Same as Kemamide® W-40 Prill, in powder form.

  These fatty amides provide a range of plastic additives, wax additives, and lubricants to various plastics applications. Acid Value: 0.0 – 5.0 Garner Color (1963): 0.0 – 3.0 Closed Tube Melt Point °C: 140.0 – 145.0 Total Amine Value: 0.00 – 5.00 Total Ash: 0.00 – 0.05 Fineness % Thru 100 Mesh: 100.00 (Min) Fineness % Thru 325 Mesh: 99.50 – 100.00 High melting point Compatible with most plasticizes and waxes Improves surface resistance to moisture, heat, salt, and most solvents

  Manufacturer: PMC Biogenix | Product Line: Kemamide Amides | Package Sizes: 50lb Bag

• 

  LOWILITE® 28

  Benzotriazole type UV light absorber, provides strong protection for a variety of polymers from degradation when exposed to UV in the range of 290-400 nm.

  LOWILITE® 28 is a strong benzotriazole UV light absorber that prevents yellowing and degradation of wide variety of polymers including two part epoxies and urethanes. Appearance: Off-white powder Bulk Density: 260 kg/m³ Molecular Weight: 351 g/mol Specific Gravity (@ 25 °C): 1.17 Melting Point: 80 °C Flash Point: 230 °C Protection from UV in the range of 290-400 nm Available in powder and granular forms Unsaturated polyesters, acrylics, thermoplastic urethanes, moisture cured urethanes, two part epoxies and urethanes, oil alkyds and thermosetting acrylic enamels

  Manufacturer: SI Group | Product Line: Si Group Uv Stabilizers | Package Sizes: 44.092lb Bag

• 

  Microthene® FA 700-00

  20 micron high density polyethylene powder with a melt index of 10.

  Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  Microthene® FA 709-00

  20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

  Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

  Manufacturer: LyondellBasell | Product Line: Microthene® F Microfine Polyolefin Powders | Package Sizes: 50lb Bag

• 

  NAUGARD® 445 Granular

  Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

  NAUGARD® 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Box

• 

  NAUGARD® 445 Powder

  Amine antioxidant with significant synergy with phenolics, particularly effective in extreme heat and oxygen environments.

  NAUGARD® 445 is an aromatic amine antioxidant and heat stabilizer for rubber and plastics characterized by high amine antioxidant activity, good color, and low volatility. It is available in granular and powder form. Appearance: White powder or granules Molecular Weight: 406 g/mol Melting Point: 98-100 °C Color APHA: 20 Specific Gravity (@55 °C): 1.14 Flash Point: 277 °C Effective protection against extreme heat and oxygen Significant synergy with phenolic and phosphite antioxidants Low volatility Minimal susceptibility to bloom Protection at low loading levels Little to no effect on cure rate Low water extractability and inherent resistance to chlorinated water Low adsorption onto fillers Recommended for use in natural and synthetic rubber products such as NBR, SBR, EAM; thermoplastic products such as polyolefins, polyurethane and other foam products; latex and hot melt adhesive products, petroleum stabilizers

  Manufacturer: SI Group | Product Line: Si Group Specialty Antioxidants | Package Sizes: 55.11lb Bag

• 

  NAUGARD® DLTDP

  Thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.

  NAUGARD® DLTDP is a FDA-sanctioned antioxidant in polyolefins and other polymer systems. Used as an auxiliary stabilizer for polyethylene, polypropylene and synthetic rubbers to promote long term heat aging properties. Appearance: White flakes Melting Point: 39-41 °C Molecular Weight: 515 g/mol Odor: Mild Fatty Soluble: Heptane, toluene Slightly Soluble: Alcohol, ethyl acetate Non-dusting Some food contact approvals Synergy with hindered phenolic antioxidants such as ANOX® 20 and ANOX® PP18 to yield: Excellent color Excellent processing stability Excellent long term aging stability

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 44.09lb Bag

• 

  NAUGARD® DSTDP

  Thioester based secondary antioxidant that imparts excellent long-term aging in polyolefins and synthetic rubber.

  NAUGARD® DLTDP is a FDA-sanctioned antioxidant in polyolefins and other polymer systems. Used as an auxiliary stabilizer for polyethylene, polypropylene and synthetic rubbers to promote long term heat aging properties. Appearance: White powder or beads Set Point: 67 °C Molecular Weight: 683 g/mol Odor: Mild fatty Soluble: Heptane, toluene Slightly Soluble: Alcohol, ethyl acetate Non-dusting Some food contact approvals Synergy with hindered phenolic antioxidants such as ANOX® 20 and ANOX® PP18 to yield: Excellent color Excellent processing stability Excellent long term aging stability

  Manufacturer: SI Group | Product Line: Si Group Main Antioxidants | Package Sizes: 44.09lb Bag

• 

  Paraloid EXL™ 2314

  Paraloid EXL™ 2314 is a specialty acrylic modifier that reacts with resin systems for significantly improved toughening, ideal for both weatherable and non-weatherable applications.

  Paraloid EXL™ Additives increase the ductility of injection moldings, lower temperature toughness, and reduce melt viscosity for engineering resins. Exceptional part surface finish Good retention of part rigidity Increase toughness even at thick sections

  Manufacturer: Dow | Product Line: Dow Paraloid™ Plastic Additives | Package Sizes: 50lb Bag

• 

  Pationic® 1240 Kosher

  Pationic® 1240 is a lactic acid with 19 - 20% calcium. It can be used as a catalyst residue neutralizer. This product is certified Kosher.

  Pationic® products offer diverse solutions for antistats, antifog, lubricants and mold releases. Calcium %: 19 - 20 pH (5% Solution): 11 min Sieve (40 Mesh Through) %: 98 min Calcium lactate-based additive Acid neutralizer

  Manufacturer: Corbion | Product Line: Pationic® Glycerol Esters | Package Sizes: 40lb Box

• 

  Pationic® 901K

  Pationic® 901K is glycerol monostearate (GMS) with 95% monoglyceride derived from vegetable oil

  Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Free Fatty Acid 1.2% Max Free Glycerine 1.5% Max Iodine Value 3 Max Monoglyceride 95% Min 100% Max FDA Approved Produced to polymer additive heat stability standards

  Manufacturer: Corbion | Product Line: Pationic® Glycerol Esters | Package Sizes: 50lb Box

• 

  Pationic® 909

  Pationic® 909 is a glycerol monostearate (GMS) with 99% mono glyceride and 1% triglycerides. It can be used in PP, PE and EPS. This product is certified Kosher.

  Derived from natural fats and oils, this is often used as internal lubricant in PVC, and can also be used as an anti fogging agent, flow modifier, and dispersing agent. Capillary Melt Point C: 72 - 75 Free Fatty Acid %: 1.20 max Free Glycerine %: 1.50 max Gardner Color: 3 max Iodine Value: 3 max Monoglyceride %: 95 min Sieve (100 Mesh Through) %: 98 - 100 Sieve (200 Mesh Through) %: 90 - 100 Triglyceride %: 1 max

  Manufacturer: Corbion | Product Line: Pationic® Glycerol Esters | Package Sizes: 40lb Box

• 

  TEP Liquid

  Clear, colorless liquid used as a solvent in many applications and carries flame retardant attributes.

  Eastman™ TEP (Triethyl Phosphate) is a process solvent that can also be used as a plasticizer for tough, fire-resistant plastics. Commonly used as an intermediate for agricultural chemicals when preparing TEPP (tetraethyl pyrophosphate). Appearance: Clear, colorless liquid Molecular weight: 182.16 Flash point: 99°C (210°F) Boiling point: 209°C (408°F) Specific gravity @ 20°C/20°C: 1.067-1.072 Viscosity @ 20°C: 1.76 cP Viscosity @ 71°C: 0.82 cP CAS: 78-40-0 Effective viscosity reducer in systems filled with aluminum trihydrate (ATH) Enhanced flame resistance in ATH systems Resin intermediates - Used as a viscosity reducer and flame retardant Oil field drilling chemicals - TEP is used in the manufacturing of oil and gas well fracturing agents known as fracturing gels Oil extraction aid - Used as a stimulant for deep wells (most US production) Polyester production - Used in the production of PET, evidently as a catalyst Silicate glass produciton - Used to incorporate phosphorous into silicate glass

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 485lb Drum

• 

  TraSys® 258

  Yields a long life release coating (3000+ cycles) for natural rubber parts, BR (Butadiene Rubber) parts and other polymers. Best release for Fluoropolymer parts.

  Exhibits outstanding release or anti stick properties with low friction. Appearance: White liquid Odor: alcohol-like Freezing Point: -89 Degrees C Volatile: 95% Partly H2O soluble Very clean and non-oily. Does not stain.

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 15.41kg Drum, 1gl Drum

• 

  TraSys® 809

  A PTFE mold release coating designed for hot mold applications using a water-based dispersion.

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing Point: 0°C Boiling Point: 100°C Great for compression and transfer molding of most rubber compounds It will not interfere with post-finishing operations Can also function in high temperatures

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 5gl Drum

• 

  TraSys® 817

  A very clean, nonoily, fluorochemical mold release coating for hot mold applications.

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing Point: 0°C Boiling Point: 100°C Ideal for touch-up for molds coating with TraSys® 158,158W, and 155 Already pre-diluted for an easy use

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems

• 

  TraSys® 818

  A very clean, nonoily, fluorochemical mold release coating for hot mold applications.

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing Point: 0°C Boiling Point: 100°C Great for easy application due to dilution already implemented. Great for rubbers, molded fluoropolymer, and plastic laminates

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 210.43kg Drum, 55gl Drum, 5gl Drum

• 

  TraSys® 825

  For elastomer compounds - offers a durable film on the mold surface which delivers multiple releases

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: white liquid pH: 7 Freezing point: 0°C Boiling point: 100°C Volatile: 94-98% Great for elastomer compounds with a desired controlled release Will produce a very durable film on the mold service Good for hot, clean, and dry surfaces

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 55gl Drum, 5gl Drum

• 

  TraSys® 9825

  Ideal for compression, transfer and injection molding of rubber compounds (great for polished surfaces)

  A mold release coating for rubbers, plastics, and epoxy and plastic laminates. Does not interfere with post-finishing operations. Appearance: bulk white liquid Density: 1.04 (H2O=1) VOCs: 1-20% Great for compression, transfer, and injection molding of rubber compounds Very clean and will not interfere with post-finishing operations

  Manufacturer: Stoner | Product Line: Trasys® Mold Release Systems | Package Sizes: 1gl Drum, 5gl Drum

• 

  WESTON® 430

  Specialty alkyl phosphite antioxidant that effectively stabilizes heat, color and viscosity in a variety of polymers.

  WESTON® 430 is a specialty alkyl phosphite antioxidant that is particularly effective at stabilizing color, as well as heat and viscosity in polymers such as polyester fibers. It has a hydroxyl number of 395 mg KOH/gm. Appearance: Clear liquid Specific Gravity @ 25 °C: 1.088-1.098 Molecular Weight: 430 g/mol Color (Pt - Co): 50 max Acid Number: 0.20 mg KOH/g max Refractive Index @ 25 °C: 1.4600-1.4635 Viscosity @ 38 °C: 42.2 cps Phosphorus Content: 7.2% Density @ 25 °C: 1.09 g/mL Vapor Pressure @ 10 mm Hg: 145 °C Flash Point (Closed Cup): 118 °C Excellent color stability Stabilizes viscosity Polyester fibers

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 473.98lb Drum

• 

  WESTON® 618F

  Highly effective, phosphite-based color and molecular weight stabilizer for polymers, elastomers, and adhesives.

  WESTON® 618F is a phosphite antioxidant that is highly effective at stabilizing color and molecular weight for a variety of polymers, elastomers, and adhesives. WESTON® 618F contributes to the thermal and UV stability of these materials as well. Appearance: White flakes Specific Gravity @ 15.5 °C: 0.92-0.935 Acid Number: 1.0 mg KOH/g Refractive Index @ 60 °C: 1.456-1.459 Phosphorus Content: 7.8-8.2% Flash Point (Closed Cup): 185 °C Bulk Density: 0.43 g/mL Melting Point: 37-46 °C Molecular Weight: 732 g/mol Food contact approvals Excellent color stability during processing, fabrication, and end use Synergizes when used with benzophenone and benzotriazole light stabilizers Reduced discoloration of polymers containing pigments like TiO₂ High performance at low loading levels Reduces discoloration of polymers with high processing temperatures that are stabilized with a sulfur-containing, nickel-organic complex Polyolefins, polyesters, elastomers, styrenics, engineering thermoplastics, and adhesives

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 44.09lb Bag

• 

  WESTON® 619F

  Highly effective, phosphite-based color and molecular weight stabilizer for polymers, elastomers, and adhesives, similar to WESTON® 618F but with improved hydrolytic stability.

  WESTON® 619F is a phosphite antioxidant similar to WESTON® 618F with improved hydrolytic stability. It is highly effective at stabilizing color and molecular weight for a variety of polymers, elastomers, and adhesives. WESTON® 619F contributes to the thermal and UV stability of these materials as well. Appearance: White flakes Specific Gravity @ 15.5 °C: 0.92-0.935 Acid Number: 1.0 mg KOH/g Refractive Index @ 60 °C: 1.456-1.459 Phosphorus Content: 7.8-8.2% Flash Point (Closed Cup): 188 °C Bulk Density: 0.43 g/mL Melting Point: 37-46 °C Molecular Weight: 732 g/mol Food contact approvals Excellent color stability during processing, fabrication, and end use Synergizes when used with benzophenone and benzotriazole light stabilizers Reduced discoloration of polymers containing pigments like TiO₂ High performance at low loading levels Reduces discoloration of polymers with high processing temperatures that are stabilized with a sulfur-containing, nickel-organic complex Polyolefins, polyesters, elastomers, styrenics, engineering thermoplastics, and adhesives

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 44.09lb Bag

• 

  WESTON® DPDP

  Alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polymers that do not require food contact approvals.

  WESTON® DPDP is an alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polycarbonate, polyurethanes, ABS polymers, and coatings. It also functions as a secondary antioxidant in PVC. Appearance: Clear liquid Specific Gravity @ 25 °C: 1.022-1.032 Acid Number: 0.05 mg KOH/g Refractive Index @ 25 °C: 1.5160-1.5190 Phosphorus Content: 8.3 % Color (APHA, Pt/Co): 50 max Molecular Weight: 374 g/mol Flash Point (Closed Cup): 154 °C Viscosity @ 38 °C: 10.3 cps Density @ 25 °C: 1.03 g/mL Vapor Pressure @ 5 mm Hg: 170 °C Soluble: Most common aprotic organic solvents Can function as both a primary and a secondary antioxidant

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 451.943lb Drum

• 

  WESTON® PDDP

  Alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polymers that do not require food contact approvals. Similar to WESTON® DPDP, but with a higher molecular weight and lower phosphorus content.

  WESTON® PDDP is an alkyl-aryl phosphite ester antioxidant that provides color and processing stability in polycarbonate, polyurethanes, ABS polymers, PET fibers, and coatings. It also functions as a secondary antioxidant in PVC. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.938-0.947 Acid Number: 0.05 mg KOH/g Refractive Index @ 25 °C: 1.4780-1.4810 Phosphorus Content: 7.1% Color (APHA, Pt/Co): 50 max Molecular Weight: 438 g/mol Flash Point (Closed Cup): 182 °C Viscosity @ 38 °C: 12.0 cps Density @ 25 °C: 0.94 g/mL Vapor Pressure @ 5 mm Hg: 190 °C Soluble: Most common aprotic organic solvents Insoluble: Water Functions as a secondary antioxidant for color and heat stability in PVC PET fiber

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 418.87lb Drum

• 

  WESTON® TDP

  Trialkyl phosphite ester antioxidant that functions as a secondary stabilizer in a variety of polymers that do not require food contact.

  WESTON® TDP is a trialkyl phosphite ester antioxidant that acts as a peroxide scavenger, providing color and processing stability in a variety of polymers and other materials such as coatings and lubricants. Appearance: Clear liquid Specific Gravity @ 25 °C: 0.884-0.984 Acid Number: 0.05 mg KOH/g Refractive Index @ 25 °C: 1.4530-1.4610 Phosphorus Content: 6.2% Color (APHA, Pt/Co): 50 max Molecular Weight: 502 g/mol Flash Point (Closed Cup): 160 °C Viscosity @ 38 °C: 11.6 cps Density @ 25 °C: 0.89 g/mL Vapor Pressure @ 5 mm Hg: 180 °C Soluble: Most common aprotic organic solvents Effective in a variety of materials including coatings and lubricants PET fibers

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 396.83lb Drum

• 

  WESTON® TPP

  Versatile aryl phosphite ester antioxidant that regulates viscosity, improves color, and prevents scorch in a variety of polymers.

  WESTON® TPP is a phosphite ester antioxidant that can be used in a variety of materials, including adhesives, coatings, styrenics, and polyurethanes to improve color stability, prevent scorch, and regulate viscosity. Acts as a catalyst adjuvant when used in polyolefins. Appearance: Clear liquid Specific Gravity @ 25 °C: 1.180-1.186 Acid Number: 0.20 mg KOH/g max Refractive Index @ 25 °C: 1.5880-1.5900 Phosphorus Content: 10% Color (APHA, Pt/Co): 50 max Molecular Weight: 310 g/mol Flash Point (Closed Cup): 146 °C Viscosity @ 38 °C: 10.2 cps Density @ 25 °C: 1.18 g/mL Vapor Pressure @ 5 mm Hg: 205 °C Soluble: Most aprotic organic solvents Insoluble: Water Regulates viscosity and improves color stability in polyester Catalyst adjuvant in polyolefins Prevents scorch during curing in polyurethanes Styrenics, engineering thermoplastics

  Manufacturer: SI Group | Product Line: Si Group Phosphite Antioxidants | Package Sizes: 518.08lb Drum