Armeen® 18D, Flake

Octadecylamine used as processing aid in wax emulsions, hydrophobing agent for silica, chemical intermediates and optimal filming amine for corrosion inhibitor

Used as an emulsifying agent, thickener, filming and boundary lubrication Equivalent weight: 269 Appearance at 25C: Solid Melting Point (C): 46 Flash Point (C): >150 Vapor Pressure (mm Hg @20C): <0.1 Specific Gravity (C): 0.791(60), 0.784(70) Chain Length: C18 HLB (Davies Scale 0-40): 8 Viscosity (SSU): 43.5(55), 42.2(65), 39.9(75) Solubility of H2O% (C): 9.3(65), 7.5(70), 4.0(80) Specific Heat (BTU/Lb/F): 0.54 pKb in Water: 3.4 Initial Boiling Point (C): 2(166), 8(196), 32(232), 349(760) Excellent in mold release applications Requires lower temperatures Reduces post mold shrinkage and weight loss and less susceptible to blistering. Facilitate filler and pigment dispersion in paints and inks

FN VEG, Powder

Vegetable source. This food grade carboxylate is derived from hydrogenated fatty acids and is used as a catalyst neutralizer.

Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. White powder Insoluble in water Flash point: 176° C Melting point 160° C Insoluble in water Lubricant Mold releasing agent Anti-caking agent FINENESS - THRU 200 MESH %: 99.00 FINENESS - THRU 40 MESH %: 100.00 FREE FATTY ACIDS (AS STEARIC) %: 0.00-2.00 HEAVY METALS %: 0.0-10.0 TOTAL ASH %: 9.00-10.50 USP TEST ARSENIC ppm: 0.0-1.5 WATER %: 0.0-4.00

Industrene® 7018, Flake

Industrene® 7018 is a saturated fatty acid composed of 70% stearic acid.

Industrene® saturated and unsaturated fatty acids are high-quality fatty acids obtained from animal fat and vegetable oils. Acid Number: 201 - 207 Iodine Value: 0 - 1 Titer: 58 - 62 Unsaponifiables: 0 - 0.50 70% Stearic acid Used for alkyd resins, rubber, mineral-flotation, adjuvants, foam depressants, caulking compounds, lubricants, buffing polishes, metallic soaps, abrasives, metal treating compounds, candles, crayons, emulsifiers, etc.

Microthene® FA 700-00

20 micron high density polyethylene powder with a melt index of 10.

Microthene FA 700-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. FA 700-00 has the highest peak melting point of all the Microthene grades. Melt index: 10 g/10 min Density: 0.952 g/cc Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1 % Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

Microthene® FA 709-00

20 micron high density polyethylene powder with a melt index of 10. Flow enhanced version of Microthene FA 700-00.

Microthene FA 709-00 is a 20 micron ultra-fine spherical polyethylene powder that is mostly used as an additive in a broad range of specialty applications. FA 709-00 is a flow enhanced version of FA 700-00. It has small amounts of fumed silica to reduce bridging and clumping. Microthene powders offer the properties of polyolefin resins but in a microfine particle size making it suitable for dispersion in aqueous systems. Melt index: 10 g/10 min Density: 0.952 g/cc Vicat softening point: 125.0°C/257.0°F Peak melting point: 134.0°C/273.2°F Low temperature brittleness: -76.0°C/-104.8°F Tensile strength @ break: 11.7/1,700 Mpa/psi Elongation @ break: 400% Flexural modulus: 1,103/160,000 Mpa/psi Hardness, Shore D: 66 Particle shape: Spherical Average particle size: 20 micron Particle size distribution: 5-50 micron Maximum moisture content: 0.1% Microfine particle size Uniform particle distribution Spherical shape Long shelf life Easy to disperse Flow enhanced version - reduces bridging and powder clumping Low shrink additive for composites Improve gloss in plastic molded parts Binder in filters and batteries Antitack (pellet dusting) for tacky polymers Viscosity modifier in grease, inks, coatings Carrier/Matrix for fabrics, paper Sintering agent in ceramics

QuaCorr 1001 Resin

The furfural diluted version of QuaCorr 1300, making it more pourable and wettable onto reinforcement fibers.

Quacorr 1001 is used to manufacture fiberglass reinforced plastic or FRP equipment. These products tends to exhibit a wide range of solvent and chemical resistance combined with excellent flame spread, physical nd smoke development properties. Specific gravity (25°C): 1.22 Viscosity, cps (25°C): 300-600 Weight, lbs./gal.: 10.1 Fufuryl alcohol content, typical: 7 Color: Dark reddish brown Odor: Furfural odor Flash point, °C: 75.6 Storage stability (25°C): >1 year Solids yield, % unfilled: 85-90* Carbon yield, % unfilled: 45-50* *dependent on catalyst Excellent resistance to acids, bases, solvents and many other combinations. Able to withstand short temperature rises up to 400F with little loss of mechanical properties. Resistance to chemical attack at high temperatures. Excellent flame spread and smoke development properties for ducting, scrubbers and stacks Ease of fabrication by hand lay up, spray up or filament winding Can also be used for large structures and pressure vessels Water insoluble, but can be diluted in many organic solvents

Stoner® A538 All Purpose Cleaner

Powerful, concentrated, water-based all-purpose cleaner for rotational molds; Quickly cleans within seconds; Reduces the need for sandblasting and breaking down molds

TraSys® 3218

TraSys® 3218 is an ideal mold release for paper rolls, plastic film rolls and guides & epoxy plastic-wood laminating operations. It is a dry release that does not interfere with post-finishing operations.

Appearance: translucent liquid Odor: alcohol-like Boiling Point: 82 Volatile: 91-96% Density: 0.800g/cm3