Select Your Region
ADCOTE™ L86-145
ADCOTE™ L86-145 is a two component polyurethane adhesive system that is used in the production of sterilizable and boil-proof laminates.
Fulfilled By ChemPoint
- Manufacturer: Bostik, Inc.
- Product Line: Bostik Laminating Adhesives
- Product: ADCOTE™
- Industries: Adhesives
- Authorized Countries: Canada | Mexico | United States
Fulfilled By ChemPoint
Quantity
Documents
Overview
ADCOTE™ L86-145 is one component of a 2K polyurethane adhesive system that produces high strength bonds with remarkable heat, chemical and moisture resistance. It is recommended to be used with an isocyanate coreactant like C-33 or ADCOTE™ 811B. The heat and chemical resistance of ADCOTE™ L86-145 make it an ideal laminating adhesive for the production of multilayer films used in autoclave, steam sterilization, and retort packaging applications.
Specifications
Solids Content: 61%
Viscosity (25°C): 1200 - 4500 mPa·S
Density: 1.11
Volatile Solvent: Ethyl Acetate
Mix Ratio by Weight (PBW): 100
Wet Appearance: Clear colorless to slightly yellow liquid
Primary Chemistry: Polyurethane
Features & Benefits
- High initial tack.
- Outstanding heat and chemical resistance.
- FDA 21CFR177.1390 Approval.
Problems Solved
Adhesive bond failure at high temperatures.
Adhesion failure caused by moisture or chemical attack.
Poor green bond strength during film lamination.
Applications
ADCOTE™ L86-145 is used in the production of high temperature laminations that are useful in food and medical packaging. Some of the most common end use applications for laminates produced using ADCOTE™ L86-145 are hot fill, boil-in bag, and steam sterilizable packaging. ADCOTE™ L86 is recommended for both film to film and film to foil laminations and can be used to bond metallized films, PET, treated PE, and silicon dioxide coated films. The ADCOTE™ L86-145 adhesive system is recommended to be applied at 25-35% solids by reverse gravure, direct gravure, or with a smooth roller system. The system can be diluted to a working solids concentration with MEK, EAc, or acetone. ADCOTE™ L86 should be applied at a coating weight of 1.5 - 5.0 g/m² and for good lamination bonds a nip temperature of 60 - 90°C should be maintained. Slitting and rewind of laminates produced with ADCOTE™ L86-145 is possible after 12- 24 hours and full cure properties are achieved after 2 days at 45°C or 7 days at 25°C.
Related Applications
Adhesives
Related Chemistries
Adhesives
Related Functions
Adhesives
Have questions? Can't find the right product?
Ask our Experts
Talk to an Expert
Can't find the right product?
When You're Ready
Get a Quote
Ask a Question
Request a Sample
Request a Document
Document Download
Thank you
Your document download will begin shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint.
We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - United States
