ADCOTE™ 33R4G is a gel lacquer, solvent based, heat seal coating commonly used for lidding, hot fill condiments, and other food packaging applications.
partner icon image
Fulfilled by ChemPoint


Product Overview
ADCOTE™ 33R4G heat seal adhesive should be applied to solvent stable substrates at 3-5 lbs per ream coating weight. It will then dry to a transparent, low blocking film. Once applied ADCOTE™ 33R4G can subsequently be heat sealed to polyethylene, polypropylene, aluminum foil, polyester and polyvinyl chloride. ADCOTE™ 33R4G has excellent hot tack and is typically recommended for lidding of hot fill condiment containers made from polyethylene, polypropylene, and PVC. ADCOTE™ carries broad FDA compliance and can be used as a heat seal coating for food packaging requiring direct and indirect food contact approval.
Product Specifications
Application Method: Gravure | Wire Wound Rods
Coating Weight: 3-5 lbs/ream
Carrier: Toluene
Chemistry: Ethylene Vinyl Acetate
Color: Opaque Liquid
Density: 7.2 lbs/gallon
Recommended Diluent: Toluene, Esters, Aliphatics
Drying Web Temperature: 180 °F
Applied Solids: 20-27 %
Supplied Solids: 27 %
Solvent: Toluene
Apply To Substrate: OPP, PET, Foil, Paper Seal To Substrate: PE, PP, PET, Foil, HIPS, PVDC/HIPS, PVC, XT polymer, PAN Thinner Toluene, Esters, Aliphatics Nominal Application Temperature: Room Temperature
Viscosity 300-600 cPs

Primary Chemistry: Ethylene Vinyl Acetate
Features & Benefits
Good blocking resistance
Great hot tack properties
High chemical resistance
Problems Solved
Failure of heat sealed bonds due to exposure to chemicals
Adhesion failure due to poor hot tack of heat seal lacquers
Heat sealing packaging
Condiment Packaging
Portion Packs