Gel lacquer heat seal coating that works best on solvent stable substrates, such as polypropylene films or aluminum foil.
Adcote 33R4G is designed to heat seal a variety of substrates including aluminum foil, polyester, polyethylene, polystyrene, polyvinyl chloride, polypropylene, Barex, and XT polymer. Adcote 33R4G is specifically recommended for polyethylene, polypropylene, and polyvinyl chloride containers. Application Method: Gravure | Wire Wound Rods Coating Weight: 3-5 lbs/ream Carrier: Toluene Chemistry: Ethylene Vinyl Acetate Color: Opaque Liquid Density: 7.2 lbs/gallon Recommended Diluent: Toluene, Esters, Aliphatics Drying Web Temperature: 180 °F Applied Solids: 20-27 % Supplied Solids: 27 % Solvent: Toluene Apply To Substrate: OPP, PET, Foil, Paper Seal To Substrate: PE, PP, PET, Foil, HIPS, PVDC/HIPS, PVC, XT polymer, PAN Thinner Toluene, Esters, Aliphatics Nominal Application Temperature: Room Temperature Viscosity 300-600 cPs Good blocking resistance Great hot tack properties High chemical resistance Condiment Packaging, Portion Packs
Water-based dispersion based on high molecular weight ethylene interpolymers for applications that require a low temperature heat seal.
Adcote™ 37P295HV-BW is a water-based dispersion based on high molecular weight ethylene interpolymers. Adcote™ 37P295HV is suggested for applications where a low temperature heat seal and good hot tack properties are needed. It may be heat sealed to untreated polyethylene. Adcote™ 37P295HV-BW is suggested for applications where a low temperature heat seal and good hot tack properties are needed. This product exhibits good adhesion to Mylar, polyethylene, polypropylene, aluminum foil and PVDC-coated glassine. It may be heat sealed to untreated polyethylene. This product has good block resistance to packaging films and has excellent hot tack. Solids: 40% Viscosity: 1000 cps** pH: 10 Weight/Gallon: 8.2 lb Shelf life: 360 Days (unopened containers) *These items are provided for general information only. They are approximate values and are not considered part of a product specification. ** Viscosity controlled to approximately 1000 cps. Adhesion to high slip films Low activation temperature Low odor Peelable bonds The major use for this dispersion is in the paper, film, and foil-converting industries where it may function as a heat seal coating, pigment binder, laminating adhesive, or a primer.
Chemical resistant, vinyl primer for aluminum foil and heat seal coatings.
Adcote™ 35D9 primer is a chemical-resistant, vinyl primer for aluminum foil or heat seal coating for aluminum foil or paper applications. Resistant to oils, many chemicals, and moisture. Solids 30% Viscosity 500 cps @ 77°F Weight/gallon 7.60 lb Solvents Acetone Diluents MEK, Toluene or Acetone/MEK with some toluene to enhance flow-out Shelf life 360 days (unopened container) Excellent adhesion to aluminum foil and paper Forms strong bonds to foil and polyvinyl chloride ADCOTE™ 35D9 primer provides excellent chemical resistance and improved anchorage of heat seal coatings when used as a wash coat or primer on aluminum foil. A primer coating weight of 0.5-1.0 lb/ream will protect the foil from corrosion and improve the adhesion on vinyl and EVA-based heat seal coatings. When used as a heat seal coating, ADCOTE™ 35D9 primer will provide excellent adhesion of itself, aluminum foil, or PVC. A dry coating weight of 1.5-4.0 lb/ream is recommended for these applications.
Water-based dispersion that is based on high molecular weight ethylene interpolymers.
ADCOTE™ 37P295-BW is suggested for use as a heat seal coating, pigment binder, laminating adhesive, primer, or as a fomulating base to produce other functional coatings. It is formulated to seal polyester, both treated and untreated polyethylene, polypropylene films, aluminum foil, and PVDC coated glassine paper. Binding resin, Blending or modifying resin Food and medical and industrial packaging Heat seal coating Low temp heat seal Primer
Water-based dispersion based on high molecular weight ethylene interpolymers; used as a heat seal coating for medical packaging and peelable lidding applications.
Adcote™ 37R345-PS is a water-based dispersion that is based on high molecular weight ethylene interpolymers. When properly applied, it will produce a porous, gas-sterilizable coating for Tyvek1 spun bonded polyolefin and sterilizable paper. It is formulated to seal to polystyrene, vinyl, XT2 polymer, ND the polyethylene side of a polyester/polyethylene laminate. It may be compounded in order to produce other functional coatings. Solids: 45% Viscosity: 400 cps @ 77°F Density: 8.2 lbs./gal. pH: 10 Gurley porosity: 50 - 105 sec. Minimum heat activation range: 170°F to 250°F Great opacity Block resistant Good porosity Medical and pharmaceutical packaging and other peelable lidding applications
Very low heat activating, water based dispersion based on high molecular weight ethylene interpolymers. Viscosity: 150 cPs.
Adcote™ 37R972 is a very low heat activating, water-based dispersion that is based on high molecular weight ethylene interpolymers. It exhibits good heat seal bonds when exposed to low temperature heat sealing conditions. It also has good clarity that may be achieved at low web temperatures. Solids 45% Viscosity 150 cps @ 77°F Density 8.2 lb/gal pH 10 Shelf life 360 days (unopened containers) Freeze/thaw stability None Minimum heat activation range 150°F to 225°F Good clarity Low activation temperature Low odor Peelable bonds Adcote™ 37R972 is suggested for use as a heat seal coating, pigment binder, laminating adhesive, primer, and as a formulating base to produce other functional coatings It can be applied to paper, various treated films, and aluminum foil. Adcote™ 37R972 is formulated to seal to polyester, polyethylene, polypropylene, aluminum foil, and PVDC-coated glassine paper.
Water-based dispersion that is based on high molecular weight ethylene interpolymers with a viscosity of 50-2,000 cPs.
Adcote™ 37T77 is formulated to provide higher levels of moisture resistance than normally associated with waterborne coatings. It will provide peelable seals to HIPS, PVDC coated HIPS, polypropylene and high density polyethylene. Solids: 35% Viscosity @77°F 50 – 2000 cps Density: 8.2 lb/gal. pH: 10.2 Provides higher levels of moisture resistance than normally associated with waterborne coatings Adcote™ 37T77 is used as a heat seal coating on paper, primed or unprimed aluminum foil, treated polyester, polypropylene and polyethylene films. It is suggested for use as a heat seal coating in lidding applications for food packaging where moisture resistance is required (i.e. containers for creamers, portion packed jellies and syrups).
Corrosion resistant, low friction, thermoplastic slip coating.
Adcote™ FE-4A is used to provide aluminum foil or paper with a surface having lowest possible coefficient of friction and resistance to staining and corrosion. Coating provides slip level required for operating on spiral winding machine mandrels without use of slip sheets. Principal uses are in paper laminated aluminum foil stocks used as inner liners in spirally wound fiber cans for motor oil, caulking compounds, refrigerated biscuits and frozen citrus juice concentrates. Also, this product can be used as a mar-proof label top coating for print paper or printed foil. Solids: 28% Viscosity: 25 + 5 sec., #4 Zahn @ 77°F (25°C) Weight/Gallon: 7.6 lb (0.911g/cm3) Solvent: MEK, acetone, toluene Corrosion resistant Low friction Paper laminated aluminum foil stocks used as inner liners in spirally wound fiber cans for motor oil, caulking compounds, refrigerated biscuits and frozen citrus juice concentrates. Also, this product can be used as a mar-proof label top coating for print paper or printed foil.
Ambient liquid, heat seal coating designed for application on solvent-stable substrates.
Adcote™ HS 33-193 is an ambient liquid, heat seal coating. It is formulated to eliminate the need to pre-melt the drums and the need to heat for application requirements. It is a room temperature applied fluid heat seal coating designed for application on solvent-stable substrates. Adcote™ HS 33-193 is specifically recommended as the heat activating coating for polyethylene, polypropylene containers Solids Content (by wt): 31.5 – 33.5% Weight/Gallon(125°F): 7.0 lbs. Viscosity (125°F) 250 - 550 cps (Brookfield) Solvent Toluene Thinner Toluene Slightly hazy Good blocking resistance Excellent hot tack properties Permits subsequent heat sealing to a variety of substrates, including aluminum foil, paper, and such plastics as polyester, polyethylene, polystyrene, polyvinyl chloride,
Modified EVA heat seal coating for HIPS and PVC cup stocks in lidding applications.
Adcote™ HS 33-213 is specially formulated to provide good grease and oil resistance, but this product is not recommended for applications where a high degree of clarity is required. Adcote™ HS 33-213 is a solution coating and does not require special heating for application. Adcote™ HS 33-213 and its analogs are not recommended for coating on polyolefin. Weight Solids: 35% Weight per Gallon @ 77°F: 8.37 lb Viscosity @ 77°F: 500 cps Solvent: n-propyl acetate, ethyl acetate Flash Point: 28°F Condiment packaging, portion packs, microwave packaging
Chemical resistant vinyl heat seal coating for aluminum foil or paper applications.
Adcote™ HS 36X101 heat seal coating is a chemical resistant, vinyl heat seal coating for aluminum foil or paper applications. Coatings made from Adcote™ HS 36X101 provides excellent adhesion to aluminum foil and paper, and form strong bonds to foil and polyvinyl chloride for use in pill blister packaging. Solids: 34% Viscosity: 350 cps @ 77°F Weight/Gallon: 7.70 lb. Solvent: Acetone Suggested Diluents: MEK, Toluene, Acetone/MEK with some toluene to enhance flow-out Good clarity Adhesion to foil and metallized films Low activation temperature Peelable bonds