Halocarbon® 1000N Oil is a premium lubricating oil from Halocarbon, formulated with polychlorotrifluoroethylene (PCTFE) base and an ultra-high viscosity of 1000 cSt at 37.8°C.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥133
Pour point, °C: 10
Cloud point, °C: 18
Density, g/mL: 1.95
Water solubility: Insoluble
Viscosity, cSt @ 37.8°C: 1000
Viscosity, cSt @ 71.1°C: 83
Refractive index: 1.415
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 1000N Oil is a premium lubricating oil from Halocarbon, formulated with polychlorotrifluoroethylene (PCTFE) base.
Halocarbon® 1000N Oil is an ultra-high viscosity PCTFE lubricating oil engineered for extreme service environments where standard lubricating fluids fail. It is produced through a controlled polymerization and stabilization process to deliver exceptional quality and performance. It is the highest viscosity inert oil of Halocarbon’s line of reactive gas lubricants and is manufactured with a viscosity of 1000 cSt at 37.8°C. This fluorinated synthetic fluid provides superior film strength, low compressibility, thermal stability, and excellent lubrication for demanding operating conditions. Halocarbon® 1000N Oil is nonflammable, nonhazardous, and chemically inert, with no flash point, allowing it to be used in systems containing chlorine, oxygen, or other reactive gases. Halocarbon® 1000N Oil is recommended for use in reactive gas service applications, mechanical seal barrier systems, and as a general-purpose lubricant for bearings, gearboxes, compressors, and pumps.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥133
Pour point, °C: 10
Cloud point, °C: 18
Density, g/mL: 1.95
Water solubility: Insoluble
Viscosity, cSt @ 37.8°C: 1000
Viscosity, cSt @ 71.1°C: 83
Refractive index: 1.415
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 1000N Oil is a premium lubricating oil from Halocarbon, formulated with polychlorotrifluoroethylene (PCTFE) base.
Thermal stress and fluid degradation in high-temperature conditions
High volatility of traditional fluids such as hydrocarbons, silicones, etc.
Poor safety properties of other lubricants and fluids containing hazardous ingredients
Poor material compatibility of fluids with plastics, polymers, metals, or elastomers
Reduced operational efficiency from the chemical breakdown of fluids
Rust or corrosion of equipment parts
Breakdown of lubricants and fluids in reactive chemical systems
Hazardous reactions in oxygen, chlorine, or other reactive gases
Reactive gas service applications
Aerospace Lubricants
Wire drawing fluids
Suspension fluids
Biological staging oils
Hydraulic fluids
Instrument Fill Fluid
Low temperature baths
Metalworking fluids
Chemical manufacturing
Compressor applications
Vacuum pump fluids
Mechanical seal barrier fluids
Low temperature calibration applications
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
