Halocarbon® 95 is a medium-viscosity polychlorotrifluoroethylene (PCTFE) lubricating oil (CAS No. 9002-83-9), available as a water-white liquid with a neutral pH. It has a viscosity of 95 cSt at 37.8°C and provides excellent stability across a wide temperature range.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥13
Pour point, °C: -26
Cloud point, °C: -21
Density, g/mL: 1.92
Water solubility: Insoluble
Viscosity, cSt @ 37.8°C: 95
Viscosity, cSt @ 71.1°C: 16
Refractive index: 1.411
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 95 is a medium-viscosity polychlorotrifluoroethylene (PCTFE) lubricating oil (CAS No. 9002-83-9) available as a water-white liquid.
Halocarbon® 95 Oil is a high-quality chlorotrifluoroethylene (PCTFE) polymer formulated by Halocarbon to deliver exceptional performance and stability in extremely low-temperature environments. It is produced using a controlled polymerization process to remove hydrogen or oxygen at the atomic level, yielding a state-of-the-art, fully saturated, low-molecular-weight polymer that is chemically inert, nonflammable, and nonhazardous. This lubricating oil can be widely used in reactive gas service applications and as a general-purpose lubricant for bearings, gearboxes, compressors, and pumps. It offers a range of valuable performance characteristics, including nonreactivity, excellent lubrication, high thermal stability, and good heat-transfer properties.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥13
Pour point, °C: -26
Cloud point, °C: -21
Density, g/mL: 1.92
Water solubility: Insoluble
Viscosity, cSt @ 37.8°C: 95
Viscosity, cSt @ 71.1°C: 16
Refractive index: 1.411
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 95 is a medium-viscosity polychlorotrifluoroethylene (PCTFE) lubricating oil (CAS No. 9002-83-9) available as a water-white liquid.
Thermal stress and fluid degradation in high-temperature conditions
High volatility of traditional fluids such as hydrocarbons, silicones, etc.
Poor safety properties of other lubricants and fluids containing hazardous ingredients
Poor material compatibility of fluids with plastics, polymers, metals, or elastomers
Reduced operational efficiency from the chemical breakdown of fluids
Rust or corrosion of equipment parts
Breakdown of lubricants and fluids in reactive chemical systems
Hazardous reactions in oxygen, chlorine, or other reactive gases
Reactive gas service applications
Aerospace Lubricants
Wire drawing fluids
Suspension fluids
Biological staging oils
Hydraulic fluids
Instrument Fill Fluid
Low temperature baths
Metalworking fluids
Chemical manufacturing
Compressor applications
Vacuum pump fluids
Mechanical seal barrier fluids
Low temperature calibration applications
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
