LOCTITE® EA 3475 is an aluminum-filled epoxy adhesive available in a two-part formulation intended to be mixed in a 1:1 ratio to form a high-strength adhesive bond for industrial repair, bonding, and maintenance applications. It consists of a resin and a hardener that cure at room temperature upon mixing and provide an operating temperature of ─20°C to 120°C.
Appearance: Gray putty
Open Time (mixed), minutes @ 20°C: 60
Shore Hardness, ISO 868, Durometer D: 85
Linear Shrinkage, ASTM D792, %: 0.1
Tensile Strength, ISO 527-2 N/mm² (psi): 50 (7,300)
Tensile Modulus , ISO 527 N/mm² (psi): 7,000 (1,000,000)
Primary Chemistry:
Epoxy
LOCTITE® EA 3475 is a two-part aluminum-reinforced adhesion compound designed by Henkel for repairs, seals, fills, and resurfacing of worn and damaged machinery. It is ideal for on-site maintenance or repairs, with gap-filling capabilities of up to 1.0 mm. It develops exceptional functional strength in 12 hours at room temperature, providing a highly resistant bond with excellent durability and low shrinkage properties. LOCTITE® EA 3475 is a non-sagging adhesive and cures to a durable, rust-resistance, aluminum-like finish.
Appearance: Gray putty
Open Time (mixed), minutes @ 20°C: 60
Shore Hardness, ISO 868, Durometer D: 85
Linear Shrinkage, ASTM D792, %: 0.1
Tensile Strength, ISO 527-2 N/mm² (psi): 50 (7,300)
Tensile Modulus , ISO 527 N/mm² (psi): 7,000 (1,000,000)
Primary Chemistry:
Epoxy
Sliding wear on moving parts
Structural defects in castings
Mechanical wear or corrosion of metal parts
Leaks in vessels, tanks, and valves
Industrial maintenance
Repairing non-structural defects in worn or corroded metal parts
Metal repair
Filling cavitated areas
Sealing vessels, tanks, and valves
Resurfacing worn parts
Renews stripped threads
Emergency repairs
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
