BIOBAN™ BP-30 is a bronopol-based, broad-spectrum biocide with numerous FDA clearances and is especially effective in combination with other biocides.
DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Liquid Color: Colorless to yellow Odor: Mild pH: 4.5 Liquid Density: 1.19 - 1.21 g/cm3 at 20°C Broad-spectrum bacterial efficacy Control of slime-forming bacteria Multiple FDA Clearances Especially effective in combination with other biocides Adhesives, paints and latex, mineral slurries, all purpose cleaners, detergents, wipes, water based agricultural pesticide concentrates
BIOBAN™ BP-PLUS is a 99% solid bronopol-based, broad-spectrum biocide with numerous FDA clearances.
DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Solid Color: White Odor: Odorless pH 5.1 - 7.0 Melting point/range: 123-130°C (253 - 266°F) Broad-spectrum bactericide Efficacy against Pseudomonas sp. Control of slime-forming bacteria Control of anaerobic organisms responsible for microbiologically induced corrosion Control of Legionella pneumophilia Broad FDA clearances Application approvals in numerous international markets Printing inks and fount solutions, chemical toilets, water based pesticide concentrates, dishwashing liquids, surface cleaners, surfactants
Liquid containing 20% water, used as a general-purpose copromoter for many unsaturated polyester formulations.
Eastman™ DMAA (N-Dimethylacetoacetamide) is a low color generating copromotor in many resin based formulations. It has shown better performance compared with DMA as a copromoter at equivalent treat rates in PG, NPG, and other glycols. Appearance: Liquid Assay: 79-83 wt% Specific gravity @ 20°C/20°C: 1.06 Flash point open cup: 122°C (252°F) Water: 17-21 wt% Molecular weight: 129.2 CAS: 2044-64-6 Low color and toxicity Easy handling with liquid form Used as a copromoter for paints and coatings and intermediate manufacturing for agricultural chemicals.
An aqueous mixture of methylchloroisothiazolinone and methylisothiazolinone (CMIT/MIT). While Kathon CG/ICP and Kathon CG/ICP II contain the same concentration of actives, Kathon CG/ICP II is a low-salt formulation that typically contains 2.80% magensium salts.
These CMIT/MIT based products are EPA registered for the in-can preservation of industrial and household products. Kathon CG/ICP I & II are odorless and colorless biocides compatible across a broad spectrum pH range. Appearance: clear liquid Color: pale blue to pale green Odor: mild Specific gravity at 20°C: 1.02 Density, lb/gal: 8.4 pH, as supplied: 2.5-4.5 Broad spectrum of activity Effective over a wide pH range Low dosage requirements No color or odor imparted into end products Excellent compatibility with surfactants Safe at recommended use levels Rapidly biodegradable All purpose liquid-cleaners, furniture and floor polishes, anti-tarnish products, air fresheners, carpet cleaners, liquid dishwashing detergents, automotive appearance products and liquid laundry products
Copromoter for unsaturated polyesters, typically used in pharmaceuticals, fragrances and pesticides.
Eastman™ MAA (Methyl Acetoacetate) is a colorless liquid used mostly as an intermediate for agricultural and pharmaceutical chemicals. MAA develops desirable hardness more rapidly than resins copromoted with DMA at equivalent treat rates. Appearance: Liquid Molecular weight: 116.1 Flash point: 74°C (165°F) Boiling point: 166°C (331°F) Melting point: -55°C Specific gravity @ 20°C/20°C: 1.078 CAS: 105-45-3 Low toxicity Low viscosity Extended gel time compared with DMA Does not impart brown color to polyesters compared to amine promoters Readily soluble in styrenated resins Used as a process solvent and intermediate manufacturing for herbicides, insecticides, and pharmaceutical chemicals.