2-Methyl-2-Butene

2-Methyl-2-Butene, Commercial Grade, 88%. A clear, colorless to pale-yellow liquid commonly used in organic synthesis, hydrogenation, halogenation, alkylation and condensation reactions.

2-Methyl-2-Butene also known as 2MB2, 2M2B or Isoamylene is an alkene hydrocarbon with the molecular formula C5H10. This material can be used across numerous major industries from paint thinners to dry cleaning fluids to pharmaceuticals. Total Isoamylene: 99.0%-99.8% 2-Methyl-2-Butene: 88%-95.2% 2-Methyl-1-Butene: 7.0 wt% API Gravity: 81.0 Density @ 60 F: 5.56 Distillation EP: 104 Distillation IBP: 97 Related Isomers: 0.1 wt% Saybolt Color: +30 Specific Gavity 60/60 F: 0.665

AAA (Acetoacetanilide)

White powder that is used in conjunction with styrenated resins to form pigments and agricultural chemicals.

Eastman™ AAA is often used as an intermediate to manufacture pigments, dyes, and fungicides. When used as a copromoter can be blended with DMAA at a 70/30 (DMAA/AAA) ratio resulting in superior performance compared to DMA in equal concentrations in resins utilizing neopentyl glycol. Appearance: White to off-white powder Assay: 99.8% Specific gravity @ 20°C/20°C: 1.26 Flash point open cup: 167°C (332°F) Flash point closed cup: 150°C (302°F) Fire point: 178°C (352°F) CAS: 102-01-2 Low color and toxicity as a copromoter Accelerates reactions in polyester resins and pigment manufacturing Good performance in producing yellow pigments Used as an intermediate for pigments, dyes, paints, graphic arts and agricultural chemicals. AAA is also used as a co-promoter for unsaturated polyesters.

AAEM (Acetoacetoxy Ethyl Methacrylate)

Low solution viscosity with excellent solubility, adjust final pH to 6-7 to improve stability.

Eastman™ AAEM is a methacrylic monomer used in high-solid acrylic resins and acrylic emulsion formulations resulting in lower VOC emissions. This product is commonly used to react with amines and hydrazides to make monomers for self-crosslinkable, room temperature cure acrylic emulsions. Appearance: Clear, light yellow liquid Viscosity @ 25°C: 6.9 cP Flash point: 134°C (273°F) Specific gravity @ 25°C/25°C: 1.12 AAEM: 95.0 wt % min HEMA: 4.0 wt % max Methacrylic acid: 0.5 wt % max CAS: 21282-97-3 Excellent flexibility and corrosion resistance Reduces viscosity in resins for lower VOC emissions Improves adhesion to metal substrates Used in applications such as automotive oems, polymers and plastics.

Advantis 510W

A waterborne, chlorine-free and APEO free adhesion promoter for adhesion of coatings to thermoplastic polyolefins or polypropylene substrates.

Advantis 510 is primarily used as a blend in additive for waterbased primers or basecoats in automotive bumper applications. It can also be used as a wash primer and suitable as an adhesion promoter in a variety of applications. Appearance: Off-white milky liquid Solids: 24 wt % pH@ 25°C: 8 Neutralization: Amine Stability Shelf life 1year: No siginificant change @ 40C, 4 weeks: No significant change Viscosity at 25°C: < 75 cP Water: 76 wt % Density: 970 g/l (8.1 lbs/gal) Particle Size: 0.03 microns Tg: < 0°C Green waterborne solvent free, APEA and halogen free making it VOC compliant in coatings Excellent compatibility with a variety of waterborne resins

AMICAL™ 48

Amical™ 48 is an in-can and dry film fungicide based on 95% active of diiodomethyl-p-tolylsulfone.

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Powder Color: Tan Odor: Odorless Melting point/range 150 °C ( 302 °F) Relative Density (water = 1): 2.2 at 22°C (72°F) Water solubility: 0.001 % at 25°C (77°F) Extremely effective active antifungal agent FDA clearances in the U.S. for several indirect food contact applications. Effective over a broad pH range (2-11) Available in easy-to-use liquid or powder forms Non dermally-irritating Most Concentrated form of Amical Adhesives, coatings, caulks, textiles

AMICAL™ Flowable

Amical™ Flowable is a water-based dispersion formulation based on the active Diiodomethyl-p-tolylsulfone. It is recommended for use in water-based formulations where high shear mixing is not used.

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Suspension Color: Gray Odor: Alcohols pH: 4 - 6 Boiling point (760 mmHg): 100°C (212 °F) Relative Density (water = 1): 1.32 - 1.33 at 25 °C Extremely effective active antifungal agent FDA clearances in the U.S. for several indirect food contact applications Effective over a broad pH range (2-11) Available in easy-to-use liquid or powder forms Non dermally-irritating Liquid Form designed for liquid blending Adhesives, coatings, caulks, textiles

AMICAL™ WP

Amical™ WP is a wettable powder based on the active Diiodomethyl-p-tolylsulfone. AMICAL™ WP is designed to be used in situations where dry blending of ingredients is desired.

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Powder Color: Tan Odor: Characteristic Bulk density: 48 - 52 lb/ft3 Extremely effective active antifungal agent FDA clearances in the U.S. for several indirect food contact applications Effective over a broad pH range (2-11) Available in easy-to-use liquid or powder forms Non dermally-irritating Designed to be used in situations where dry blending of ingredients is desired Adhesives, coatings, caulks, textiles

AP 550-1-25% Aromatic 100

A nonchlorinated polyolefin adhesion promoter supplied at 25% solids in aromatic 100.

Adhesion promoter for Polypropylene and thermoplastic olefin substrates. Form: Viscous liquid Color: Yellow Odor: Aromatic Specific gravity in water: Negligible Flash point (Pesky-Martens closed cup): 46,8°C Thermal decomposition Temperature (DSC): No exotherm to 500°C Excellent performance under 2K urethane coatings Excellent adhesion and gasoline resistance Soluble in aromatic hydrocarbon solvents such as xylene, toluene and aromatic 100 Can be used as a primer or an additive

AP 550-1-25% Xylene

A nonchlorinated polyolefin adhesion promoter supplied at 25% solids in xylene.

Adhesion promoter for polypropylene and thermoplastic olefin substrates. Form: Viscous liquid Color: Yellow Odor: Aromatic Specific gravity in water: <1 Boiling point: 137-144°C Solubility: Negligible Flash point (Pesky-Martens closed cup): 46,8°C Thermal decomposition temperature (DSC): No exotherm to 500°C Excellent performance under 2K urethane coatings Excellent adhesion and gasoline resistance Soluble in aromatic hydrocarbon solvents such as xylene, toluene and aromatic 100 Can be used as a primer or an additive

AQ™ 65S Polymer

AQ™ 65S is a water dispersible polyester used to provide excellent water and alcohol resistance with a low coefficient of friction.

AQ™ 65S polymer is a polyester supplied in pellet form. In aqueous dispersions, it provides excellent water and alcohol resistance. It's a low odor, low co-efficient of friction fast drying dispersion. Chemical type: Sulfopolyester Form: Amber colored pellets Solids: 100% Glass transition temperature (Tg): 63°C Odor: Low odor Excellent water and alcohol resistance Low coefficient of friction Low odor Fast drying rates Coatings and primers Printing inks and overprints

BIOBAN™ DXN

Bioban DXN is an EPA-registered biocide for the protection of water-based industrial products, processes and systems against microbiological growth and spoilage. It is a broad-spectrum biocide with efficacy against both bacteria and fungi.

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Liquid Color: Yellow to orange Odor: Pungent pH: 5.2 Boiling point (760 mmHg): 185°C (365°F) Flash point: 87°C (189°F) Broad-spectrum efficacy Non-formaldehyde release Soluble in water and in oil (hydrocarbons) Effective over a wide pH range (3-8) Non-halogenated, non-phenolic Compatible with anionic, cationic and non-ionic compounds Should not be used in systems containing high levels of ammonia and/or amines Paints, coatings, industrial adhesives, specialty industrial products

BIOBAN™ IPBC 40 Antimicrobial

Bioban™ IPBC is based on 40% active concentration of 3-Iodo-2 propynylbutylcarbamate

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: Liquid Color: Yellow Odor: Characteristic pH: 5.2 Boiling point (760 mmHg): 160 °C Relative Density (water = 1): 1.153 Low viscosity Easy pumping No settling of solids Low freezing point temperature Does not contain organometallic compounds Effective against a wide range of fungal organisms Adhesives, paints, stains, coatings

BIOBAN™ O 45

Bioban™ O 45 is a broad spectrum fungicide (not algaecide) based on a 45% active concentration of OIT

DuPont antimicrobials are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: liquid Color: yellow Odor: Odorless pH: 2.4 Melting point/range: -40°C Boiling point (760 mmHg): 188°C Flash point: 93°C Relative Density (water=1): 1.038 at 20°C Broad-spectrum fungicide Non-yellowing Solvent based Cost-effective Easy to handle liquid formulation Coatings, paints, adhesives, caulks, sealants, grouting, tackifier

Butyl Acrylate

Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

CA-394-60LF

CA-394-60LF is a low odor cellulose acetate with a very high melting point.

CA-394-60LF provides high strength and good resistance to UV light, hear, oils, and greases in various lacquers. It can be used in lacquers for glass, plastic, wire, and release coatings. ASTM-A viscosity, sec: 24 - 44 Acetyl by titration, wt%: 40.0 +/- 0.5 Moisture, wt%: 5.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion

CA-398-10

CA-398-10 is a medium viscosity cellulose acetate. It gives high strength and excellent chemical resistance in coatings and adhesives.

CA-398-10 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 8.0 - 13.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

CA-398-3

CA-398-3 is the lowest viscosity grade of the cellulose acetate range. It is used as additive in protective coatings for electronics, adhesives and plastic products.

CA-398-3 provides performance benefits in solvent- and grease-resistant coatings for textile, wire and paper products, barrier and release coatings for adhesives, protective coatings for plastic items and membrane material. Cellulose acetates are only soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 2.0 - 4.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

CA-398-30

CA-398-30 is the highest viscosity grade in the cellulose acetate range. It provides valuable properties in protective coatings.

CA-398-13 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 8.0 - 13.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

CA-398-6

CA-398-6 is a low viscosity cellulose acetate. It can be used as a performance additive in tapes and sealants.

CA-398-6 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 5.0 - 7.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

CAB-321-0.1

CAB-321-0.1 is a cellulose ester resin with a low butyryl content. The low viscosity permits higher solids concentrations.

CAB-321-0.1 is a cellulose ester resin with a low butyryl content low high viscosity content. Cellulose esters provide excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 14 - 24 Acetyl by GC, wt%: 28 - 31 Butyryl by GC, wt%: 16.5 - 19 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.4 Film toughness Heat resistance Improves flow and leveling Reduces cratering Reduces dry time Provides polishability Improves sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-381-0.1

CAB-381-0.1 is a cellulose ester resin with a medium butyryl content and has the lowest molecular weight of the 381 range. This product is designed for use in curing coatings and inks.

CAB-381-0.1 is with its medium butyryl content soluble and compatible with many resins and plastizers. It provides excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 0.07 - 0.16 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-381-0.5

CAB-381-0.5 is a cellulose ester with low viscosity and medium butyryl content. It is designed for relatively high solid applications.

CAB-381-0.5 is a general purpose cellulose ester and recommended for many types of coatings and inks. It provides excellent color, flexibility, flow control, pigment dispersion and weather resistance. 381 is compatible with many resins and is soluble in low-cost solvent systems. This low viscosity 381 provides wetting and adhesion improvement in inks. In coatings improved metal flake orientation, resistance to redissolve from the topcoat solvents and excellent sprayability are key benefits. CAB-381-0.5 is commonly used in nail coatings for its compatibility, it improves dry-time and flexibility of nail clearcoats. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-381-2

CAB-381-2 is a resin with a high viscosity. It is effective in increasing cold-crack resistance and results in greater film toughness.

CAB-381-2 is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 1.2 - 2.8 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-381-2 BP

CAB-381-2 BP is similar to CAB-381-2 designed to meet the needs of European formulators.

CAB-381-2 BP is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

CAB-381-20

CAB-381-20 has the highest viscosity in its range and can be used as both binder and thickener in coatings and inks.

CAB-381-20 is a cellulose ester resins with medium butyryl content and high viscosity. It provides excellent color, greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 17 - 28 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 35 - 39 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-381-20 BP

CAB-381-20 BP is a slightly modified version of CAB-381-20 designed to meet the needs of European formulators.

CAB-381-20 BP is a cellulose ester resins with medium butyryl content and high viscosity. It provides greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 12 -20 Acetyl by GC, wt%: 14 - 17 Butyryl by GC, wt%: 33.0 -38.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.5 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

CAB-500-5

CAB-500-5 has a high butyryl and low hydroxyl content and medium viscosity. It results in flexible films requiring limited amount of plasticizers.

CAB-500-5 is a cellulose acetate butyrate and used as binder or additive in coatings and inks. With a high butyryl level, CAB-500-5 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It has tolerance for nonpolar aliphatic and aromatic hydrocarbons. Viscosity ASTM-A, sec: 3 - 6 Acetyl by GC, wt%: 2.5 -5 Butyryl by GC, wt%: 49 - 53 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-531-1

CAB-531-1 is a high butyryl cellulose ester resin. It provides tough films with good marring resistance.

CAB-531-0.1 is used as binder or additive in coatings and inks. The high butyryl level provides high flexibility, high solubility, good adhesion and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. Viscosity ASTM-A, sec: 1.3 - 2.6 Acetyl by GC, wt%: 2 - 4 Butyryl by GC, wt%: 48 - 52 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.1 - 2.1 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

CAB-551-0.01

CAB-551-0.01 is the lowest viscosity cellulose ester resin with the highest butyryl substitution.

CAB-551-0.01 is used as binder or additive in coatings and inks. The high butyryl level contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. Due to its low molecular weight, 551-0.01 provides better flow and wetting. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. CAB-551-0.01 can be used by pultruders to enable higher pultrusion speed and prevent internal/external cracking. Viscosity ASTM-A, sec: 0.01 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 50-54 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.6 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Improve pultrusion speed Prevent pultrusion cracking

CAB-551-0.2

CAB-551-0.2 is a high butyryl, and relatively low molecular weight resin. It is compatible with numerous cross-linking resins.

CAB-551-0.2 is cellulose ester used as binder or additive in coatings and inks. With the high butyryl level, CAB-551 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is widely used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. CAB-551-0.2 can be used by pultruders to enable higher pultrusion speed and prevent internal/external cracking. Viscosity ASTM-A, sec: 0.16 - 0.25 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 49.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Improve pultrusion speed Prevent pultrusion cracking Soluble in alcohol

CAB-553-0.4

CAB-553-0.4 is a high butyryl, high hydroxyl cellulose ester resin. It is soluble in alcohols.

CAB-553-0.4 is used as binder or additive in various types of coatings and inks. The high butyryl level provides high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. CAB-553 is soluble in alcohol and organic solvents, it even tolerates a substantial portion of water. CAB-553-0.4 is also used in nail care products for its compatibility and solubility in alcohols. it provides improved clear film, flow and dry-time. Viscosity ASTM-A, sec: 0.16 - 0.40 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 44- 50 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 4.0 - 5.0 Soluble in alcohol Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

Capstone™ FS-63

Similar to FS-61, but contains isopropyl alcohol.

Capstone™ FS-63 is a water-soluble, anionic fluorosurfactant that provides low aqueous surface tensions with minimal foaming. Capstone™ FS-63 offers great wetting, leveling, anti-block, and dirt pick-up resistance. Appearance: Pale yellow to amber liquid pH: 7.5–9.0 Specific Gravity: 1.1 g/mL Stability: Freeze-thaw stable. Mix well before use. Composition: 35% solids, 20% isopropyl alcohol, 45% water Shelf Life: 5 years Flash Point: 26 °C (79 °F) Foam: Can foam with excessive shaking Anti-blocking Oil repellency Dirt pick-up resistance Wetting and enhanced leveling Re-wet characteristics in multi-coat applications Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency Reduced bath drag-out Very Low Foam REACH compliant Listed on TSCA inventory Architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning.

Capstone™ FS-64

Aqueous anionic fluorinated surfactant that is VOC-free, APEO-free, nonflammable, and provides excellent anti-blocking, oil repellency, and dirt pick-up resistance (DPR) with a minimum of 20% renewably sourced ingredients by weight.

FS-64, a VOC-free, APEO-free, non-flammable anionic fluorosurfactant, combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sourced™ material, which contains a minimum of 20% renewably sourced ingredients by weight. FS-64 is an environmentally preferred fluorosurfactant that provides all the general performance attributes you would expect from a fluorosurfactant, including: superior surface tension reduction, anti-block, oil repellency, dirt pick-up resistance (DPR), excellent leveling characteristics and stability in highly acidic and alkaline media. Appearance: Light yellow to amber, clear liquid pH: 7–9 Specific Gravity: 1.1 g/mL Stability: Freeze-thaw stable. Mix well before use. Composition: 15% solids Shelf Life: 5 years Flash Point: Does not flash Anti-blocking Oil repellency Wetting and enhanced leveling Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency Compatible with silicone additives REACH compliant Listed on TSCA inventory Architectural coatings, Industrial finishes, Water-Based Floor Care (Finishes, Waxes, and Polishes), Concentrated Cleaning Solutions, Additive to Water-Based Paints and Coatings

Capstone™ FS-65

Aqueous nonionic fluorinated surfactant that is VOC-free, APEO-free, and stable in acidic, basic, and brine environments.

FS-65 is VOC-free and APEO-free, and has a strong non-ionic character under all conditions. It is stable in acidic, basic and brine environments. In addition to providing superior performance, FS-65 meets the OECD 301B test methods criteria pertaining to biodegradability. Appearance: Yellow to amber liquid pH: 7.5–9 Specific Gravity: 1.1 g/mL Stability: Mix well before use. Freeze-thaw stable. Warm the product to room temperature, and mix before use after cold storage. Stable in brine and aggressive media. Composition: 25% solids Shelf Life: 5 years Foam: Can foam with excessive shaking VOC-free Water-soluble Anti-blocking Oil repellency Low foaming Wetting and enhanced leveling Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency REACH compliant Listed on TSCA inventory Architectural coatings, Industrial finishes, Water-based floor care (Finishes, Waxes, and Polishes), Concentrated cleaning solutions, Additive to water-based paints and coatings, etching applications, Stability and Surface Activity in Brine and Aggressive (Acidic and Basic) Media

Capstone™ FS-81

Aqueous nonionic fluoropolymer that can be combined with anionic fluorosurfactants to provide optimal performance for dirt pickup resistance (DPR).

APEO-free, non-flammable FS-81 is a self-dispersed, waterborne, partially fluorinated polymeric coating additive designed to improve cleanability of oily dirt and common household stains on flat architectural waterborne coatings and latex paints. Appearance: Off-white to yellow liquid Use Rate: (active ingredient) 0.1–0.2% 0.1–0.3% 0.07–0.1% Density: 1.08 g/mL Flash Point: >200 °F (93 °C) Composition: 33% active ingredient Foam: FS-81 has very low foam and does not cause additional foam in coating systems. Odor: Faint methyl isobutyl ketone odor Solubility: Dispersible directly in latex paint. The product can be diluted with water and has limited solubility in polar solvents. Shelf Life: Three years after production under normal storage conditions Low sheen Improves oil contact angles on interior, flat finish, Easy Clean latex coatings Improved cleanability of oily, dirt-based stains, such as dirty handprints, and other household stains Improved performance with dirt pickup resistance (DPR). Does not interfere with re-coat adhesion and does not affect water repellency Low Foaming Interior and exterior latex paints, oil-based stains, printing inks, architectural paints, waterborne coatings

Capstone™ FS-83

Nonionic fluoropolymer in butyl acetate that is APEO-free and nonflammable.

APEO-free, non-flammable FS-83 is solvent-borne, partially fluorinated copolymers that provide surface tension reduction and superior easy-clean performance in solvent-based coating systems. Appearance: Light pale to yellow liquid Composition: 35% solids in butyl acetate (BuOAc) Structure: Partially fluorinated acrylic copolymer Ionic Character: Non-ionic Specific Gravity: 0.97 g/mL Flash Point: 28 °C (82 °F) Stability: Product gels below 10 °C (50 °F), warming up the product to 25 °C (77 °F) will reverse gelling. Product is freeze-thaw stable. Mix well before use. Solubility: >5% in isopar-H, mineral spirits, butyl acetate, n-heptane Shelf Life: 2 years Improves wetting and leveling to eliminate craters, pinholes, fisheyes, and orange peel Compatible with many solvent-based waxes and polishes Improves water and oil repellency of dried film Improved dispersion stability REACH compliant Listed on TSCA inventory Paints and Coatings, Waxes and Varnishes, Fluoropolymer and PTFE Dispersion

CELLOSIZE™ EP-09

CELLOSIZE™ EP-09 is a water-soluble cellulose thickener. It has the lowest viscosity of the CELLOSIZE™ product range of 90-160 cP. EP stands for emulsion polymerization grade.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. EP-09 is surface treated to increase dispersion in water. Viscosity: 90 to 160 cP Volatiles: 6 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-100MH

CELLOSIZE™ QP-100MH has the highest molecular weight of all CELLOSIZE products. This grade provides a high thickening efficiency.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-100MH is widely used as thickener and yields a viscosity of 4,400 tp 6,000 cP. This grade provides the most pseudoplastic rheology and very effective where high thickening is desired. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 1.50 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective thickener Film former Good chemical compatibility

CELLOSIZE™ QP-15000H

CELLOSIZE™ QP-15000H is a cellulosic thickener with a medium molecular weight. As a general purpose thickener it is used in coatings, cleaners and adhesives.

CELLOSIZE™ QP-15000H EUR yields a viscosity of 1,100 to 1,500 cP. CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 1,100 to 1,500 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-300

CELLOSIZE™ QP-300 is a hydroxylethyl cellulose (HEC) polymer with a medium viscosity of 300-400 cP. It can be used as a thickener and film former.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 300 to 400 cP Volatiles: 5.0 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Thickener Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-30000H

CELLOSIZE™ QP-30000H is a general purpose thickener with a high molecular weight. It yields viscosity of 1,500-2,400 cP at low addition levels.

CELLOSIZE™ QP-30000H is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-30000H has a medium molecular weight. Viscosity: 1,500 to 2,400 cP Volatiles: 6 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-4400H EUR

CELLOSIZE™ QP-4400H is a medium viscosity water-soluble cellulosic polymer. This HEC is a general purposed thickener for various applications. It yield a viscosity of 4,800-6,000 cP at low addition levels.

CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 0.80 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CELLOSIZE™ QP-52000H

CELLOSIZE™ QP-52000H has a high molecular weight water-soluble thickener. It is a efficient thickener and commonly used in adhesives and cleaning products.

CELLOSIZE™ QP-52000H is due to its high molecular weight a very efficient thickener. CELLOSIZE™ hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE™ include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 2,400 - 3,000 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

CHDA HP

Excellent thermal stability for lower resin color and good humidity resistance.

Eastman™ CHDA HP is a cycloaliphatic diacid that offers many benefits to polyester resins for coatings and fiberglass-reinforced plastics. CHDA is approved in US and Europe for use in polyester resins to be used in food contact coatings. Appearance: White to off-white powder Viscosity @ 25°C: 6.9 cP Flash point: 235°C (455°F) Melting point: 164-167°C (327-333°F) Specific gravity @ 20°C/20°C: 1.38 Solubility in water @ 20°C: 1 wt% CAS: 1076-97-7 Rapid esterification Low resin color Harness and flexibility blaance Improved corrosion and stain resistance Better hydrolytic stability Great gloss retention and prevents yellowing Used in polyester resins for coatings and fiberglass-reinforced plastics. Can also be used in improving performance in waterborne, high solids, powder coatings, and coil coating applications.

CHDM D

Offered white waxy solid form. Requires a hot room or drum heater to melt the contents for removal.

Eastman™ CHDM-D is a cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It is often used in conjunction with Eastman NPG™ as a glycol modifier for resins. Appearance: White waxy solid Viscosity @ 23°C: 877 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-8 Hardness and Flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as building materials, coil coatings, contruction chemicals, machinery coatings, paints, drink packaging, polymer modification, and protective coatings.

CHDM D90

In solution of approximately 90% by weight CHDM-D and 10% water. Solution is liquid at room temperature for easier handling.

Eastman™ CHDM-D90 is a cycloaliphatic glycol in liquid form at room temperature. Used mostly to make saturated and unsaturated polyester resins. The 10 weight percent water in CHDM-D90 is removed during heating of the resin reaction process. Can also be used as a glycol modifier with Eastman NPG™ for resins. Appearance: Slightly hazy liquid Viscosity @ 23°C: 915 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-9 (90%) CAS: 7732-18-5 (10%) Hardness and flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as automotive coatings, paints, industrial coatings, protective coatings, and process additives.

CP 153-2-25% Xylene

A 25% solution of chlorinated polyolefin adhesion promoter in xylene with a 21-25% by weight chlorine.

CP 153-2 is a 25% solution of CPO in xylene with excellent heat stability at temperatures higher than typically encountered under actual use conditions. It is the only product currently available for PE based substrates. Form: 25% in Xylene Color, Gardner: 12-15 Specific gravity @25°C: 0.97 Flash point: 30°C(81°F) Fire point: 30°C(86°F) Chlorine: 21-25 wt% Specific gravity, solid CPO 25°C: 1.105 Provides excellent adhesion of coatings, inks and adhesives applied to polyethylene based substrates. Low chloride content makes it suitable for primer applications Can be formulated with EVA copolymers to improve adhesion performance

CP 164-1-100%

A 100% solid chlorinated polyolefin adhesion promoter with 18-23% chlorine.

CP 164-1 has a softening point of 80-105°C and is soluble in toluene and xylene. It has an increased resistance to primer coat re-dissolve during topcoat application due to it's limited solubility. Specific gravity @25°C: 1.016 Flash point tag closed cup: >204°C (>400°F) Color Gardner: 12-16 Softening point: 80-105°C (176-221°F) Chlorine: 18-23 wt% Improved gasoline and humidity resistance in PP and TPO over CP 343-1 when used in primer applications for paint adhesion Low chloride content makes it suitable for primer applications Soluble in aromatic hydrocarbon solvents

CP 164-1-25% Xylene

A liquid version of CP 164-1-100% adhesion promoter. The grade is readily dissolved in 25% xylene.

CP 164-1 has a softening point of 80-105°C. The product is readily dissolved in 25% xylene for easier use. It provides increased resistance to primer coat re-dissolve during topcoat application due to it's limited solubility. Specific gravity @25°C: 0.898 Flash point, tag closed cup: >23°C (74°F) Color, Gardner: 12-16 Chlorine: 18-23 wt% Improved gasoline and humidity resistance in PP and TPO over CP 343-1 when used in primer applications for paint adhesion Low chloride content makes it suitable for primer applications Soluble in aromatic hydrocarbon solvents

CP 310W

A water dispersed chlorinated polyolefin adhesion promoter with 30% solids by weight

A water dispersed chlorinated polyolefin with ammonia as a neutralizing amine and 24% CPO by weight content. Useful as a primer in adhesion promoters that are air dried prior to applying a topcoat. Solids: 30 wt % CPO: 24 wt % pH @25°C: 9-10 Amine: Ammonia Shelf, 1 yr: No change @50°C, 4wk: Slight settle Freeze thaw: Good Wt/Vol: 1012 g/L (8.4 lb/gal) Viscocity, Brookfield: 10 cP Chlorination: 18-23 % Water: 69 wt % color, Gardner: Beige Specific Gravity @25°C/25°C: 1.008 Used in primer for PP and TPO Compatible with most Polyurethane and acrylics dispersions resins Co-solvents can be added to improve wetting of the substrate Adhesion promoter in paints Coatings in automotive plastics Automotive OEM Coatings for plastic parts

CP 343-1-100%

A white solid powder containing 18-23% chlorine with excellent resistance to high temperatures with a softening point range of 80-95°C.

CP 343-1-100 is a chlorinated polyolefin soluble in both toluene and xylene. Due to it's limited solubility, solutions of CP 343-1- may become hazy or partially precipate from solution or gel with exposure to low temperatures. Warming the solution to 38-49°C will return the product back to it's original condition. Form: Powder Specific gravity @25°C: 1.03 Flash point, tag closed cup: 274°C (525°F) Color, Gardner: Light tan Softening point: 80-95°C (176-203°F) Chlorine: 18-23 wt% Excellent primer in PP, TPO, Non-olefin plastics and metal substrates Excellent humidity resistance Available in 25%, 40% and 50% by weight solids in xylene Modification of CP343-1 with ethylene vinyl acetate increases the softening point and cohesive strength of primer film.

CP 343-1-25% Xylene

A liquid version of CP 343-1-100% adhesion promoter. The grade is readily dissolved in 25% xylene.

A liquid version of CP 343-1-100 chlorinated polyolefin dissolved in xylene. The grade provides improved adhesion to PP, TPO, Non-olefin plastics and metal substrates. Specific gravity @25°C: 0.898 Flash point, tag closed cup: 27°C (81°F) Fire point: 30°C (86°F) Color, Gardner: 7 Autoignition temperature (Test method - D 2155): 485°C (905°F) Specific gravity, solid CPO @25°C: 0.99-1.03 Chlorine: 18-23 wt Excellent primer in PP, TPO, Non-olefin plastics and metal substrates Excellent humidity resistance Available in 25%, 40% and 50% by weight solids in xylene Modification of CP343-1 with ethylene vinyl acetate increases the softening point and cohesive strength of primer film.

CP 343-1-40% Xylene

A liquid version of CP 343-1-100% adhesion promoter. The grade is readily dissolved in 40% xylene.

A liquid version of CP 343-1-100 chlorinated polyolefin dissolved in xylene. The grade provides improved adhesion to PP, TPO, Non-olefin plastics and metal substrates. Specific gravity @25°C: 0.93 Flash point, tag closed cup: 23°C (74°F) Color, Gardner: 8 Specific gravity, solid CPO @25°C: 0.99-1.03 Chlorine: 18-23 wt Excellent primer in PP, TPO, Non-olefin plastics and metal substrates Excellent humidity resistance Available in 25%, 40% and 50% by weight solids in xylene Modification of CP343-1 with ethylene vinyl acetate increases the softening point and cohesive strength of primer film.

CP 343-1-50% Xylene

A liquid version of CP 343-1-100% adhesion promoter. The grade is readily dissolved in 50% xylene.

A liquid version of CP 343-1-100 chlorinated polyolefin dissolved in xylene. The grade provides improved adhesion to PP, TPO, Non-olefin plastics and metal substrates. Specific gravity @25°C: 0.935 Flash point, tag closed cup: 28°C (83°F) Fire point: 52°C (125°F) Color, Gardner: 8 Autoignition temperature (Test method - D 2155): 460°C (860°F) Specific gravity, solid CPO @25°C: 0.99-1.03 Chlorine: 18-23 wt Excellent primer in PP, TPO, Non-olefin plastics and metal substrates Excellent humidity resistance Available in 25%, 40% and 50% by weight solids in xylene Modification of CP343-1 with ethylene vinyl acetate increases the softening point and cohesive strength of primer film.

CP 343-3-25% Xylene

A higher chlorine version adhesion promoter. The grade is readily dissolved in 25% xylene with 26-32% chlorine.

CP343 is a higher chlorinated adhesion promoter that can be used as an additive in coatings, inks or adhesives. The higher chlorine content allow for improved solutbility in a variety of solvents and compatibility with different coatings, inks and adhesives systems. Specific gravity @25°C: 0.906 Flash point, tag closed cup: 23°C (74°F) Fire point: 36°C (97°F) Color, Gardner: 6-7 Autoignition temperature (Test method - D 2155): >538°C (>1000°F) Specific gravity, solid CPO @25°C: 1.108 Chlorine: 26-32 wt% Adhesion to polypropylene, Thermoplastic polyolefin, non olefin plastics and metals Good solvent tolerance for a wide range of solvents Excellent stir-in additive in industrial coatings and inks Enhanced compatibility with various resins

CP 343-3-50% Xylene

A higher chlorine version adhesion promoter. The grade is readily dissolved in 50% .xylene with 26-32% chlorine and a Gardner color of 6-7.

CP343 is a higher chlorinated adhesion promoter that can be used as an additive in coatings, inks or adhesives. The higher chlorine content allow for improved solutbility in a variety of solvents and compatibility with different coatings, inks and adhesives systems. Specific gravity @25°C: 0.986 Flash point, tag closed cup: 27°C (80°F) Color, Gardner: 11 Specific gravity, solid CPO @25°C: 1.108 Chlorine: 26-32 wt% Adhesion to polypropylene, Thermoplastic polyolefin, non olefin plastics and metals Good solvent tolerance for a wide range of solvents Excellent stir-in additive in industrial coatings and inks Enhanced compatibility with various resins

CP 347W

A water dispersed chlorinated polyolefin with 25% solids by weight.

A water dispersed chlorinated polyolefin containing 2-amino-2-methyl-1-propanol as a neutralizing amine and 20% CPO by weight content. Compatible with other waterborne resins making it more useful as an additive. also Compatible with many amine-neutralizable solution resins. Solids: 25 wt % CPO: 20 wt % pH @25°C: 9-10 Shelf, 1 yr: No change @50°C, 4wk: No change Freeze thaw: Good Wt/vol: 1010-1030 g/L (8.4-8.6 lb/gal) Viscosity, Brookfield: 10cP Chlorination: 18-23% Water: 74 wt % Color, Gardner: Tan Specific gravity @25°C: 1.020 Used in primer for PP and TPO Used as a stir-in additive in waterborne coatings to improve adhesion to PP and TPO Compatible with most Polyurethane and acrylics dispersions resins Co-solvents can be added to improve wetting of the substrate Adhesion promoter for paints Automotive OEM Coatings Coatings for automotive plastics Coatings for plastics parts Graphic arts General industrial coatings

CP 349W

A water dispersed chlorinated polyolefin with 26% solids by weight.

A water disperion of a chlorinated polyolefin containing 2-amino-2-methyl-1-propanol as a neutralizing amine with 5% ethylene glycol. Compatible with other waterborne resins making it useful as an additive. Solids: 26 wt % CPO: 20 wt % pH @25°C: 9-10 Wt/vol: 1010-1040 g/L (8.4-8.7 lb/gal) Viscosity, Brookfield: 10cP Chlorination: 18-23% Water: 69 wt % Organic solvents: 5 wt % Color, Gardner: Tan Specific gravity @25°C: 1.020 Features and Benefits similar to CP 347W Adhesion promoter for paints Automotive OEM Coatings Coatings for automotive plastics Coatings for plastics parts Graphic arts General industrial coatings

CP 515-2-40% Aromatic 100

A 40% solids chlorinated polyolefin adhesion promoter dissolved in Aromatic 100 with a chlorine content of 26-32 % weight.

CP515-2 can be used as an additive for coatings inks and adhesives with improved adhesion to Thermoplastic polyolefins, polypropylene and other difficult to adhere to substrates. Specific gravity @25°C: 0.944 Flash point, tag closed cup: 41°C (107°F) Color, Gardner: 7 Specific gravity, solid CPO @25°C: 1.04-1.09 Chlorine: 26-32 wt% Improved compatibility with a variety of resins to give clear solutions and deposit clear films. Excellent adhesion to a variety of substrates such as polypropylene, thermoplastic olefins, non-olefin plastics and metal Can be used as an additive in inks and coatings to improve adhesion High Temperature stability

CP 515-2-40% Toluene

A 40% solids chlorinated polyolefin adhesion promoter sin Toluene with a chlorine content of 26-32 % weight.

CP515-2 can be used as an additive for coatings inks and adhesives with improved adhesion to Thermoplastic polyolefins, polypropylene and other difficult to adhere to substrates. Form: 40% in Toluene Specific gravity @25°C: 0.96 Flash point, tag closed cup: 5°C(41°F) Color, Gardner: 6 Improved compatibility with a variety of resins to give clear solutions and deposit clear films. Excellent adhesion to a variety of substrates such as polypropylene, thermoplastic olefins, non-olefin plastics and metal Can be used as an additive in inks and coatings to improve adhesion High Temperature stability

CP 515-2-40% Xylene

A 40% solids chlorinated polyolefin adhesion promoter in Xylene with an autoignition temperature of 525°C and Color Gardner of 3.

CP515-2 can be used as an additive for coatings inks and adhesives with improved adhesion to Thermoplastic polyolefins, polypropylene and other difficult to adhere to substrates. Specific gravity @25°C: 0.955 Flash point, tag closed cup: 28°C (82°F) Fire point: 43°C (110°F) Color, Gardner: 3 Autoignition temperature D 2155: 525°C (975°F) Specific gravity, solid CPO @25°C: 1.04-1.09 Chlorine: 26-32 wt% Improved compatibility with a variety of resins to give clear solutions and deposit clear films. Excellent adhesion to a variety of substrates such as polypropylene, thermoplastic olefins, non-olefin plastics and metal Can be used as an additive in inks and coatings to improve adhesion High Temperature stability

CP 730-1-100%

100% solids chlorinated polyolefin adhesion promoter with 20-23% active ingredient.

Active component in primers used to enhance adhesion of color coats and topcoats to polypropylene and thermoplastics olefins plastics. Physical form: Solid (Granules) Color: Beige Specific gravity: >1 Softening point: > 100°C Flash point: Not applicable, combustible solid Chlorine 20.5-23.5% Solubility in water: Negligible Excellent adhesion to thermoplastics and polypropylene plastics Excellent humidity resistance Excellent gasoline resistance

CP 730-1-20% Aromatic 100

A 20% solid solution of CP 730-1-100% adhesion promoter dissolved in Aromatic 100.

Active component in primers used to enhance adhesion of color coats and topcoats to polypropylene and thermoplastics olefins plastics. Physical form: Liquid Color: Yellow Odor: Aromatic Specific gravity: <1 Boiling point: 155°C Flash point, Pensky-Martens closed cup: 40°C Thermal decomposition temperature (DSC): No exothermic to 450°C Excellent adhesion to thermoplastics and polypropylene plastics Excellent humidity resistance Excellent gasoline resistance

CP 730-1-20% Xylene

A liquid version of CP 730-1-100% adhesion promoter. the grade is dissolved in 20% xylene.

Active component in primers used to enhance adhesion of color coats and topcoats to polypropylene and thermoplastics olefins plastics. Physical form: Liquid Color: Yellow Odor: Slightly aromatic Specific gravity: <1 Boiling point: 135°C Viscosity at 25°C: 300-400 mPa.s Solubility in water: Negligible Flash point, Pensky-Martens closed cup: 40°C Thermal decomposition temperature (DSC): No exotherm to 450°C Excellent adhesion to thermoplastics and polypropylene plastics Excellent humidity resistance Excellent gasoline resistance

DryFilm 2000/IPA Dispersion

A 20% solids dispersion of specialty sized polytetrafluoroethylene (PTFE) in isopropyl alcohol (IPA).

DryFilm 2000/IPA dispersion, a lubricant that is very stable and designed for specially designed applications, such as blade coating and grease thickening. The exceptional performance of DryFilm 2000/IPA dispersion in these applications is a result of the small size and uniformity of its particles and the fact that it has a higher molecular weight than DryFilm formulations. Solids, wt%: 20 Melting Point: 323 °C (613.4 °F) Molecular Weight: 40,000 Density, g/cc: 2.16 Particle Size, μm: Average Bulk 4–12, Primary Particle <0.2 Volatiles, %: 80 Odor: Alcohol Form: Fluid Dispersion Color: Translucent Density, lb/gal: 8.3 Solvent: IPA Shelf Life: 2 years Extend-ability; allows for customization of the dispersion Can be extended with additional amounts of the base solvents Imparts high lubricity and nonstick properties Resistant to attack by nitric acid, hydrochloric acid, sodium hydroxide, and alcoholic potassium hydroxide in most applications Thermal stable Can be added to liquids (oils) and semisolid formulations to enhance lubricity, promote thickening, and retard fouling, blade coating and grease thickening. Not approved for food contact applications.

DryFilm RA Dispersion

A 15% solids dispersion of specialty sized polytetrafluoroethylene (PTFE) in HFC 43-10 solvent.

DryFilm RA dispersions is a very stable lubricant, suitable for dry film lubrication. Mold release and anti-stick applications. Solids, wt%: 15 Melting Point: 300 °C (581 °F) Molecular Weight: 3000 Density, g/cc: 2.2 Particle Size, μm: Mean: 3.7, Range: 1-15 Volatiles, %: 85 Odor: Oderless Form: Fluid Dispersion Color: Translucent Specific gravity: 1.63 Density, lb/gal: 13.6 Solvent: HFC 43-10 Low coefficient of friction Superior effectiveness as a dry lubricant Enhance lubricity Promote thickening Retard fouling Release agent in processes for molding of rubber and plastic parts, dry lubricant for leather, plastics and elastomers, coating and production of metal, fabrics, thread, cord twine, rope, additives for paints and finishes, paper and carbon paper coatings, and printing and writing inks.

DryFilm RA-IPA Dispersion

A 25% solids dispersion of specialty sized polytetrafluoroethylene (PTFE) in isopropyl alcohol (IPA).

DryFilm RA/IPA dispersion is a very stable lubricant, suitable for dry film lubrication. <old release and anti-stick applications. Solids, wt%: 25 Melting Point: 300 °C (581 °F) Molecular Weight: 3000 Density, g/cc: 2.2 Particle Size, μm: Mean: 3.7, Range: 1-15 Volatiles, %: 75 Odor: Alchohol Form: Fluid Dispersion Color: Translucent White Specific gravity: 0.94 Density, lb/gal: 7.8 Solvent: IPA Low coefficient of friction Superior effectiveness as a dry lubricant Enhance lubricity Promote thickening Retard fouling Release agent in processes for molding of rubber and plastic parts, dry lubricant for leather, plastics and elastomers, coating and production of metal, fabrics, thread, cord twine, rope, additives for paints and finishes, paper and carbon paper coatings, and printing and writing inks.

DryFilm RA-W Dispersion

A 20% solids dispersion of specialty sized polytetrafluoroethylene (PTFE) in water.

DryFilm RA-W dispersion is a very stable lubricant, suitable for dry film lubrication. Mold release and anti-stick applications. Solids, wt%: 20 Melting Point: 300 °C (581 °F) Molecular Weight: 3000 Density, g/cc: 2.2 Particle Size, μm: Mean: 3.7, Range: 1-15 Volatiles, %: 80 Odor: Slightly Sweet Form: Fluid Dispersion Color: Creamy White Specific gravity: 1.1 Density, lb/gal: 9.2 Solvent: Water Low coefficient of friction Superior effectiveness as a dry lubricant Enhance lubricity Promote thickening Retard fouling Release agent in processes for molding of rubber and plastic parts, dry lubricant for leather, plastics and elastomers, coating and production of metal, fabrics, thread, cord twine, rope, additives for paints and finishes, paper and carbon paper coatings, and printing and writing inks.

Eastman DTBHQ Crystalline

Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).

Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.

Eastman MTBHQ Dry

Secondary inhibitor (co-inhibitor) and antioxidant for nonfood fats and oils.

Eastman™ MTBHQ (mono t-butyl hydroquinone) is commonly used as a polymerization inhibitor and antioxidant in many industrial applications. Effective in higher temperatures due to its higher solubility and potency compared to unsubstituted hydroquinone. Appearance: Light tan solid Flash point: 171°C (340°F) Boiling point: 295°C (563°F) Melting point: 125°C (257°F) Specific gravity 20°C/20°C: 1.05 Molecular weight: 166.22 CAS: 1948-33-0 Very effective polymerization inhibitor Good performing antioxidant in unstable organic liquids Excellent performance as a heat and stabilizer for pressure-sensitiveness adhesives Used as a polymerization inhibitor and industrial antioxidant in many applications.

Elvacite® 2008

Low molecular weight methyl methacrylate copolymer used in lacquers and inks requiring low viscosity at high solids.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.18 @ 25°C Glass transition temp, onset: 111°C Particle size (D50): 140 - 240 microns Acid number: 9 Elongation at break (23°C, 50% R.H.): 0.5% Molecular weight: 37,000 Inherent viscosity: 0.172 - 0.194 % Moisture: 0.5 (max) Good pigment dispersion Highest tact temperature

Elvacite® 2008C

Same as Elvacite® 2008 however it's nonreactive and specifically used for reactive systems.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.18 @ 25°C Glass transition temp, onset: 111°C Particle size (D50): 140 - 240 microns Acid number: 9 Elongation at break (23°C, 50% R.H.): 0.5% Molecular weight: 37,000 Inherent viscosity: 0.172 - 0.194 % Moisture: 0.5 (max) Good pigment dispersion Highest tact temperature Improves rheology

Elvacite® 2013

Elvacite®2013 is a unique acrylic resin that also complies with compositional requirements of the FDA. Elvacite®2013 is softer than the methyl methacrylate grades.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.15 @ 25°C Glass transition temp, onset: 76°C Molecular weight: 34,000 Particle size (D50): 160-200 microns Acid number: 5 Tensile strength: 1,600 psi Elongation at break (23°C, 50% R.H.): 0.5% Methacrylic acid: 0.55-0.75% Inherent viscosity: 0.156 - 0.174 % Moisture: 0.35 (max) Fast dissolving Low viscosity Fast solvent release

Elvacite® 2014

Medium molecular weight methyl methacrylate copolymer; the softest and most flexible of the copolymer grades and provides great pigment wetting. Elvacite® 2014 also has a wide range of resin compatibility.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 41 Molecular weight: 119,000 Form: Spherical beads Particle size (D50): 120-200 microns Specific gravity: 1.14 Inherent viscosity b: 0.37-0.43 Acid number: 13 Moisture (% max): 0.5 Tukon hardness, knoop no. 4 Tensile strength, psi 3,500 Elongation at break (23°C, 50% RH): 18% Increased flexibility Soluble in alcohol Increased abrasion resistance Better wear Binder for concrete sealant and coating, traffic paint, clear, translucent or pigmented metal coatings, pigmented coatings to improve pigment wetting, seamless floors

Elvacite® 2016

General purpose low viscosity, low molecular weight methyl methacrylate/n-butyl methacrylate copolymer.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Glass transition temperature (°C): 59 Molecular weight: 60,000 Form: Spherical beads Particle size (Microtrac® D50): 170 - 265 microns Specific gravity: 1.13 Inherent viscosity b: 0.230-0.255 Acid number: 3.5 Moisture (% max): 0.50 Tukon hardness, knoop No. 8 Tensile strength, psi 2,300 Elongation at break (23°C, 50% RH): 2% Excellent hardness Low hazard High gloss Resistance to UV discoloration Fast dissolving Low viscosity Clear, translucent or pigmented metal coatings, heat seal lacquers, traffic marking paints, inks

Elvacite® 2028

Elvacite® 2028 has a low molecular weight therefore making it broad in solubility and compatibility.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 45°C Molecular weight: 59,000 Particle size (D50): 130-220 microns Acid number: 12 Tukon hardness, knoops no: 6 Tensile strength: 800 psi Elongation at break (23°C, 50% R.H.): 75% Inherent viscosity: 0.226-0.257 % Moisture: 0.8 (max) % Methacrylic acid 1.4 - 2.0 Improved pigment dispersion Can be used in brass coatings Soluble in some alcohols Use in no-reactive resins in reactive coatings

Elvacite® 2550

Medium molecular weight methacrylate copolymer resin providing excellent adhesion to metal and good flexibility.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.04 @ 25°C Glass transition temp, onset: 42°C Molecular weight: 110,000 Inherent viscosity: 0.300 - 0.340 Brookfield viscosity (cP) @ 25°C in toluene: 520 - 800 % Moisture: 0.75 (max) % Methacrylic acid: 2.20 - 2.70 Good flexibility Excellent adhesion to metal surfaces Medium molecular weight

Elvacite® 2552C

Elvacite® 2552C is specifically designed for transportation finishes such as automotive, motorcycle and bikes. It can be used as a high clear topcoat in multiple coats or as a binder in high gloss base coats

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Elvacite® 2552 is engineered for use in solvent-based coatings where high gloss and finish depth is required. This polymer is internally plasticized to resist cold cracking and crazing and to provide flexibility over a broad range of temperatures Appearance: Solid beads Specific gravity: 1.08 @ 25°C Glass transition temp, onset: 90°C Molecular weight: 75,000 Acid number: 0 Tukon hardness, knoops no: 15.5 Inherent viscosity: 0.30 - 0.34 % Moisture: 0.5 (max) High gloss and ultra-clear film formation Superior adhesion and durability High solubility in alcohols, ketones and hydrocarbon solvents Internally plasticized to resist cold cracking and crazing Excellent resistance to abrasion and moisture Exceptional UV light and chemical resistance High flexibility over a broad range of temperatures

Elvacite® 2614

A low odor version of Elvacite® 2013.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.15 @ 25°C Glass transition temp, onset: 76°C Molecular weight: 34,000 Particle size (D50): 160-200 microns Acid number: 5 Tensile strength: 1,600 psi Elongation at break (23°C, 50% R.H.): 0.5% Methacrylic acid: 0.55-0.75% Inherent viscosity: 0.156 - 0.174 % Moisture: 0.35 (max) Fast dissolving Low viscosity Fast solvent release Low odor

Elvacite® 2669

Elvacite® 2669 is a water soluble methacrylate copolymer that can be dissolved in slightly alkaline aqueous solutions. Due to it's characteristics, it's often used where solvent emissions need to be minimized.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.2 @ 25°C Glass transition temp, onset: 101°C Molecular weight: 22,000 Inherent viscosity: 0.285 - 0.350 Brookfield viscosity (cP) @ 30% in PGM: 500 - 900 % Moisture: 2.20 (max) % Methacrylic acid: 19.0 - 22.0 Dissolved in slightly alkaline aqueous systems Abrasion resistance Excellent viscosity control Soluble in higher pH systems

Elvacite® 2927

Thermoplastic acrylic resin with controlled molecular architecture. The technology has been developed with a VOC limit target of 3.5 lb./gal.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Specific gravity 1.13 Glass transition temperature (Tg) °C 46 Inherent viscosity b 0.110-0.130 Molecular weight 19,000 Acid number 3.5 Moisture content, (% Max.) 0.65 Low viscosity VOC compliant Lower odor solvents Higher flash solvents High solids

Elvacite® 4036

Methacrylate copolymer with improved adhesion to polyolefin substrates.

Elvacite® thermoplastic acrylic resin copolymers or polymers are used in wide range of applications of solvent based coatings, inks and adhesives. Elvacite® 4036 provides advanced adhesion to polyolefin substrates such as polypropylene, polyethylene and thermoplastics. Elvacite® acrylic resins can also be used to improve adhesion to variety of substrates including metals, concrete, glass and plastics and hot melt systems. Appearance: Solid beads Specific gravity: 1.18 @ 25°C Glass transition temp, onset: 59°C Molecular weight: 54,000 Acid number: 3.9 Tukon hardness, knoops no: 13 Brookfield viscosity (cP) @ 40% in toluene: 330 - 460 Inherent viscosity: 0.230 - 0.260 % Moisture: 0.5 (max) Wide range of solvent-based inks Excellent weatherability UV resistance High gloss Hardness Superior abrasion resistance

Elvacite® 4055

Methacrylate copolymer designed for pigment dispersion. Elvacite® 4055 can be used with typical acrylic, alkyd and epoxy resins.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Glass transition temp, onset: 76°C Molecular weight: 6,000 Acid number: 7 Inherent viscosity: 0.040 - 0.065 % Moisture: 0.5 (max) % Methacrylic acid: 0.450 - 1.20 Used in universal pigment pasts Wide range of compatibility Dissolves at room temperature

Elvacite® 4067

Solid acrylic bead resin that has been designed to give good solubility in white spirit for use in combinations with alkyd resins.

Elvacite® 4067 is a solid acrylic bead resin that has been designed for use in combinations with alkyd resins. Elvacite® 4067 has good compatibility with a wide range of short, medium and long oil alkyds and can be used to shorten drying time of alkyd-based coatings. Elvacite® 4067 may also improve color and color stability, and enhance weatherability. Appearance: Solid bead Glass transition temp, onset: 50°C Molecular weight (Mw): 57,000 Improved pigment dispersion Gravure inks as the sole binder or as a modifying resin Adhesives for viscosity modification Enhanced weatherability Shortens dry time Low odor, Higher flash solvents

Elvacite® 4072

Elvacite® 4072 has medium molecular weight and has a broad compatibility and solubility.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 46°C Molecular weight: 85,000 Acid number: 0.7 - 2.1 Better adhesion to metal substrates Solvent-free Excellent flexibility Usage as protective topcoat

Elvacite® 4115

Methacrylate copolymer designed to give good solubility in white spirit or use with alkyd resins. Elvacite® 4115 also complies with TSCA and EINECS.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Glass transition temp, onset: 50°C Molecular weight: 50,000 Inherent viscosity: 0.190 - 0.210 % Moisture: 0.5 (max) Acid number: 0 Good solubility Shortens drying time Enhances weatherability Improvement in color and color stability

Elvacite® 4188

Elvacite® 4188 is specifically engineered for for systems where improved adhesion is required for difficult metal substrates.

Elvacite® 4188 is a solid bead methacrylate copolymer designed for use in solvent based systems where improved adhesion to difficult metals is required. The product is suitable for variety of metal coatings applications such as automotive and marine coatings. It may also be used for a brass, aluminum and hot stamping applications. Elvacite® 4188 demonstrates excellent adhesion to plastic substrates such as PS, ABS, and PVC. Appearance: Solid beads Glass transition temp, onset: 61°C Molecular weight: 55,000 Particle size (D50): 100 - 350 microns Acid number: 10 Brookfield viscosity (cP) @ 40% in toluene: 350 - 550 Inherent viscosity: 0.230 - 0.255 % Moisture: 0.5 (max) % Acid: 0.80 - 1.6 Improved adhesion to a variety of difficult metal substrates such as aluminum , brass and galvanized steel Excellent outdoor durability Exceptional resistance to abrasion and moisture Excellent ultraviolet and chemical resistance Resistance to UV degradation

Elvacite® 4331

Solvent-free methacrylate copolymer resin, with excellent compatibility and water-white clarity. Suitable for preparation of universal pigment pastes, this resin yields a lower solution viscosity compared to similar products, allowing for heavier pigment loading.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Glass transition temp, onset: 61°C Molecular weight: 4,000 Acid number: 7 Inherent viscosity: 0.035 - 0.060 % Moisture: 0.5 (max) % Methacrylic acid: 0.450 - 0.75 Compatibility with wide range of pigments and resins Low viscosity solutions Solvent free Water-white clarity

Elvacite® 4343

This thermoplastic bead resin was designed for specialty coatings and inks.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Weight % non-volatile: >99.0 Glass transition temp, onset: 50-60°C Molecular weight: 50,000 Clarity: Clear (40% solids in toluene) Solid acid number: 6 - 8 mg KOH/g Brookfield viscosity (cP) @ 25°C: 200 - 300 Dissolves in room temperature

Elvacite® 4346

Specifically designed for environmentally friendly sound coatings and adhesives.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Glass transition temp, onset: 74°C Molecular weight: 22,000 Acid number: 0 Amine number: 18 Solvent free Excellent solubility in VOC except solvents Improves inorganic pigment dispersion

Elvacite® 4402

Hydroxyl-functional, methacrylate copolymer for use in thermoset coatings and adhesives. Specifically used in environmentally friendly formulations.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Glass transition temp, onset: 76°C Molecular weight: 40,000 Hydroxyl number: 9 Acid number: 5 Inherent viscosity: 0.16 Solvent free Superior chemical resistance Excellent outdoor durability and UV resistance Favourable balance of flexibility and hardness Low molecular weight

Elvacite® 75

Medium molecular weight methyl methacraylate copolymer. Elvacite® 75 is compatible with Elvacite® 2008, 2009, 2010, 2013, 2021, 2041, and 2051.

Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid bead Specific gravity: 1.19 @ 25° C Glass transition temp, onset: 113°C Molecular weight: 100,000 Solid surface seam sealer Improved chemical and abrasion resistance Primary binder Soluble in various solvent systems

Epolene® C-13P Polymer

Epolene® C-13P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and plastic and rubber compounding.

Epolene® C-13P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-10 has a molecular weight of 76,000 and is the powder form of Epolene® C-13 Polymer Type: LDPE Product Form: Powder Molecular Weight: 76,000 Ring and Ball Softening Point: 110°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: MI=190 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat stability Automotive refinish, wax modification,

Epolene® C-15 Polymer

Epolene® C-15 is a low density polyethylene polymer with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15 is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in pellet form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-15P Polymer

Epolene® C-15P is a low density polyethylene powder with medium molecular weight and low color for use in adhesives, coatings, wax modification and color concentrates.

Epolene® C-15P is a branched LDPE homopolymer that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-15 has a molecular weight of 17,000 and is provided in powder form. Polymer Type: LDPE Molecular Weight: 17,000 Ring and Ball Softening Point: 101°C (ASTM E 28) Penetration Hardness: 4 dmm (ASTM D5) Viscosity, Brookfield: 1,800 cP @ 190°C Low moisture vapor transmission Low color Grease resistance High gloss Good heat seal ability Packaging, automotive refinish, wax modification

Epolene® C-16P Polymer

Epolene® C-16P is a maleic anhydride modified, low density polyethylene powder for use in adhesives, coatings, and color concentrates.

Epolene® C-16P is a branched LDPE homopolymer with maleic anhydride that can be used as a base polymer for coatings, adhesives, and color concentrate dispersions. It is well suited for applications requiring compatibility with polyamide. The maleic anhydride modification allows for improved adhesion and improved aging properties in hot melt adhesive formulations. It can also be used as an additive to provide lubricity in rubber compounds. Epolene® C-16P has a molecular weight of 26,000 and is provided in powder form. Polymer Type: Ma-PE Molecular Weight: 26,000 Ring and Ball Softening Point: 102°C (ASTM E 28) Penetration Hardness: 3 dmm (ASTM D5) Viscosity, Brookfield: 2,850 cP @ 190°C Low moisture vapor transmission Grease resistance High gloss Good heat seal ability Improved adhesion High filler tolerance Superior aging properties Color concentrates, automotive, wax modification, building & construction coatings, solvent-based adhesives

ETHOCEL™ Standard 10 Industrial

ETHOCEL™ Standard 10 Industrial is a thickener for solvent based systems. It is an ethylcellulose with a high purity and provides consistent performance.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 10 Premium

ETHOCEL™ Standard 10 Premium is Pharma compliant and similar to ETHOCEL™ Standard 10 Industrial.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Pharma compliant Organosoluble Thermoplastic Highly compatible with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 100 Industrial

ETHOCEL™ Standard 100 Industrial is a solvent based cellulose ether thickener. It has a ethoxyl content of 49% and yields a viscosity of 100 cP at moderate addition level.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 90.0 - 110.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 20 Industrial

ETHOCEL™ Standard 20 Industrial is a solvent based cellulose thickener with a viscosity of 20 cP.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 20 an ethoxyl content of 49%. Viscosity: 18.0 - 22.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 200 Industrial

ETHOCEL™ Standard 200 Industrial is solvent based thickener. It is a cellulose ether yielding a viscosity of 200 cP at moderate addition level.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 180.0 - 220.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 300 Industrial

ETHOCEL™ Standard 300 Industrial is cellulose ether thickener for solvent based systems. It has the highest viscosity of the ETHOCEL™ range.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 270.0 - 330.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 4 Industrial

ETHOCEL™ Standard 4 Industrial is a cellulose ether thickener for solvent based systems. With 4 cP, it has the lowest viscosity of the ETHOCEL™ range.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 4 has a low viscosity of 4 cP and an ethoxyl content of 49%. Viscosity: 3.0 - 5.5 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 45 Industrial

ETHOCEL™ Standard 45 Industrial is a cellulose ether thickener for solvent based systems. It has a ethoxyl content of 49% and a viscosity of 45 cP.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 45 Premium

ETHOCEL™ Standard 45 Premium is Pharma compliant and has the same properties as ETHOCEL™ Standard 45 Industrial.

ETHOCEL™ Standard 45 Premium is a solvent soluble cellulose ether thickener. It has a ethoxyl content of 49% and a viscosity of 45 cP. ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% wt Max Residue on Ignition: 0.040% wt Max Pharma compliant with USP, NF, EP, JPE, FCC Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

ETHOCEL™ Standard 7 Industrial

ETHOCEL™ Standard 7 Industrial is an ethylcellulose polymer with a viscosity of 7 cP and yields an ethoxyl content of 49%.

ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 7 has a low viscosity of 7 cP and an ethoxyl content of 49%. Viscosity: 6.0 - 8.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

KATHON™ LX 1.5%

preservation of a finished adhesive or coating is desired, a thin film fungicide or mildewcide is needed.

Kathon LX 1.5% is a isothiazolinone-based preservative used to protect polymers, coatings, adhesives and pigments and is an effective and efficient in-can preservative for systems with pH 2-8.5, extending shelf life of a product in its wet state. If long-term...

DuPont Industrial microbicides are a collection of in-can and thin-film preservatives that are appropriate for a multitude of product applications. Physical state: liquid Color: Light blue to light green Odor: Mild, inoffensive odor pH: 2 - 4 Melting point/range: -3.00 °C ( 26.60 °F) Relative Vapor Density (air = 1): 0.6200 Relative Density (water = 1): 1.0200 Formaldehyde free Broad efficacy Low use levels Suited for formulations < pH 8.5 No VOC contribution Adhesives, paints & coatings, agriculture, latex, dispersed pigments, and building materials

Lucite® 47GS

Lucite® 47GS acrylic resin is often combined with adipic acid to reduce glass-to-glass abrasion and corrosion.

Lucite® high-quality acrylic resins are designed with exact chemical properties to meet customer's needs. The production process results in pure resin that is optically pleasing. Products are seen in thousands of applications globally. Form: spherical beads Density: 9.96 lbs/gal Moisture absorption (24h)%: 0.30 Rockwell Hardness: M95 Refractive Index: 1.491 Luminous transmittance (0.125 in/0.3 mm) %: 92 Tensile Strength (23°C, 50% R.H.) Mpa: 73 Psi: 10,400 Elongation at break (23°C, 50% R.H.) %: 4 Physical separator to ease glass handling Highly resilient Inert, non-hazardous Cost effective Easy to apply Easy to remove

LUDOX® AS-40

LUDOX® AS-40 is a 40% aqueous dispersion of small silica particles stabilized with ammonium.

LUDOX® AS-40 can be used in a variety of applications, including metal coatings and catalyst formulations and as a high temperature binder in investment casting and refractory. LUDOX® AS-40 is counter-stabilized with ammonium and is a preferable choice for applications where sodium is detrimental. Chemistry: Colloidal Silica Silica Content: 39-41% Specific Surface Area: 135 m2/g pH: 9.1 Specific Gravity: 1.30 (@25°C) Viscosity: 11 cP (@25°C) Particle Charge: Negative Stabilizing Counter Ion: Ammonium Excellent stability High binder performance Small particle size Ammonium stabilized Investment casting, catalysts, coatings, refractory fibers, anti-soil treatments

LUDOX® HS-40

LUDOX® HS-40 is a 40% aqueous dispersion of 12 nanometer particle size colloidal dispersion

LUDOX® HS-40 is an aqueous mono-dispersion containing 40% colloidal silica. It can be used in a variety of applications, including coatings and catalyst formulations and as a high temperature binder in investment casting and refractory. LUDOX® HS-40 is counter-stabilized with sodium. Density (g/cm³, lb/gal): 1.3, 10.8 Boiling Point (760 mm Hg) °C/°F: 100/212 Melting Point °C/°F: 0/32 Vapor Pressure (25°C) mm Hg: 24 Vapor Pressure (38°C) mm Hg: 48 Stabilizing Counter Ion: Sodium Particle Charge: Negative Biocide ppm: 240 Excellent stability High binder performance Small particle size Narrow particle size distribution

Lupasol® FT WF

Waterfree polyethylenimine with a molecular weight around 25,000.

Lupasol® FT WF is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 25,000 Viscosity @ 20°C: 200,000 Concentration: 99% Color: clear to slightly cloudy, colorless to yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Printing inks, Adhesion promoters in car tires, Adhesives, Complexing, Plastics modification, Coatings and paints, Pigment manufacture, Protein immobilization, Textile auxiliaries, Packaging, and Water treatment.

Lupasol® G 20

50% aqueous solution of polyethylenimine with a molecular weight around 1,300.

Lupasol® G 20, a 50% aqueous solution, is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Average molar mass: 1,300 Viscosity @ 25°C: 1,500 Concentration: 50% Color: clear to slightly cloudy, colorless to rarely yellowish liquid at room temp. Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.

Lupasol® SC-61B

37% aqueous solution of a hydroxyethylated polyethylenimine.

Lupasol® SC-61B is a hydroxyethlyated water soluble polyethylenimine formed by reaction of a high molecular weight polyethylenimine with ethylene oxide. Average molecular weight: 110,000 Viscosity @ 25°C: 2,500 cP max Solid matter content, %: 35-40 Appearance: Free flowing liquid Film forming amine in coatings and printing ink, brightener in electroplating baths, cationic modifier for clays and starches, cosmetic and personal care.

MAA (Methyl Acetoacetate)

Copromoter for unsaturated polyesters, typically used in pharmaceuticals, fragrances and pesticides.

Eastman™ MAA (Methyl Acetoacetate) is a colorless liquid used mostly as an intermediate for agricultural and pharmaceutical chemicals. MAA develops desirable hardness more rapidly than resins copromoted with DMA at equivalent treat rates. Appearance: Liquid Molecular weight: 116.1 Flash point: 74°C (165°F) Boiling point: 166°C (331°F) Melting point: -55°C Specific gravity @ 20°C/20°C: 1.078 CAS: 105-45-3 Low toxicity Low viscosity Extended gel time compared with DMA Does not impart brown color to polyesters compared to amine promoters Readily soluble in styrenated resins Used as a process solvent and intermediate manufacturing for herbicides, insecticides, and pharmaceutical chemicals.

MERPOL® HCS

Effective nonionic wetting agent and emulsifier with a cloud point >100°C so it is effective when many other surfactants are not. Excellent in galvanizing as an insulator for a flux tank.

Stepan is a world leader in providing surfactants in many consumer and industrial application. They offer a broad range of cationic, nonionic, amphoteric and anionic surfactants which meet specific customer needs. % Active: 60 Cloud Point: >100°C CMC: 0 mg/l Density: 1.03 g/ml Draves Wetting, sec @ 25°C: >1 Flash Point, PMCC,: >100°C Form @ 25°C: Liquid Freeze Point: -5°C HLB: 15.3 Pour Point: -2°C Specific Gravity @ 25°C: 1.03 Surface Tension: 41.0 mN/m Viscosity, cps @ 25°C: 35 Surface tension reduction Stable as wetting agent for bleaching liquors Stability improvement for softener and resin formulations

METHOCEL™ 240S

METHOCEL™ 240S has the same properties as METHOCEL™ 240, except 240S is surface-treated and can be added directly to an aqueous system to dissolve.

METHOCEL™ is a hydroxypropyl methylcellulose (HPMC) thickener. It is a water-soluble, high-purity, non-ionic cellulose ether. METHOCEL™ 240S yields high viscosity of 40000 cP at low addition levels. The 240S powder is surface-treated and can be added directly to an aqueous system to dissolve. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 30000 - 50000 cP Surface treated Results in a semi-firm gel texture Highly soluble in cold water Able to revert back to liquid form when cooling down

METHOCEL™ 311 Powder

METHOCEL™ 311 Powder is highly soluble in organic solvent systems. It yields a viscosity of 120,000 cP with properties similar to other HPMC grades.

METHOCEL™ is a hydroxypropyl methylcellulose (HPMC) thickener. It is a water-soluble, high-purity, non-ionic cellulose ether. METHOCEL™ 311 powder yields viscosity of 120,000 cP at low addition levels and has the highest substitution. It is designed for combined water/organic solvent systems. 311 is recommended for paint remover formulations to increase the contact time of the remover on the application surface. Methoxyl: 22.0 - 27.0% Hydroxypropoxyl: 25.0 - 32.0% Viscosity, Brookfield RVT, Spindle No. 4 @ 20rpm, 1% in Methylene Chloride, @20°C: 7,500 mPa.s Can be added directly to any solvent or solvent blend Reduced drip and solvent evaporation rate

METHOCEL™ A15C

Methocel™ A15C is a methylcellulose thickener. It performs many functions simultaneously including thickening, binding, water retention and film forming. The A15C grade has a viscosity range from 1,200 to 1,800 cP.

Methocel™ A15C is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier and functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Sodium Chloride: max 1.5% Viscosity, 2% in water, @20°C, calculated: 1200 - 1800 cP Forms a firm gel texture Reversible hot water gelation

METHOCEL™ A15LV

Methocel™ A15LV is a low viscosity methylcellulose. With a viscosity from 12 to 18 cP, it is one of the lowest in the Methocel product range. It functions as a rheology modifier in coatings and adhesives.

Methocel™ A15LV is a low viscosity water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, while various properties are simultaneously present and interact in combination. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A15LV Premium

METHOCEL™ A15LV Premium has the same performance properties as METHOCEL™ A15LV, except this premium product has less impurities. It can be used in pharmaceutical applications.

METHOCEL™ A15LV Premium is a water-soluble polymer derived from cellulose with a very low viscosity. Methocel is a high purity, non-ionic cellulose ether. Besides thickening, binding, Methocel functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, due to the fact that various properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5.0% Max Residue on ignition: 1.5% Max Ash sulphated: 1.5% Max Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Pharmaceutical grade USP/EP/JP compliant Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ A4C

METHOCEL™ A4C is a low viscosity methylcellulose thickener. It yields a viscosity of 400 cP at low addition levels.

Methocel™ A4C is a water-soluble, high purity, non-ionic cellulose ether, and performs as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.50% Sodium Chloride: max 2.0% Viscosity, 2% in water, @20°C, calculated: 350 - 550 cP Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible

METHOCEL™ A4C Premium

METHOCEL™ A4C Premium has the same performance as METHOCEL™ A4C, except this premium product is pharmaceutical compliant.

Methocel™ A4C Premium is a water-soluble, high purity, non-ionic cellulose ether. It has a low viscosity range of 320 to 480 cps. Methocel is used as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5% Max Residue on ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Viscosity, 2% in water, @20degC, calculated: 320 - 480 cP Pharmaceutical grade Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible USP/EP/JP compliant

METHOCEL™ A4M

METHOCEL™ A4M is a methylcellulose and yields a viscosity of 4,000 cP. It is used as thickener, binder, film former, and water-retention agent.

METHOCEL™ A4M is a water-soluble methylcellulose. Methocel products also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 3,500 - 5,600 cP Yields optimum performance at a lower concentration Water soluble No ionic charge pH stable Thermal gelation which is reversible

METHOCEL™ E15 Industrial LV

METHOCEL™ E15 Industrial LV is an HPMC with a low viscosity of 15 cP. Solutions of this grade can be made at 10% to 15% concentration.

METHOCEL™ E15LV is water-soluble and non-ionic cellulose ether. It is often used as a thickener or binder. Methocel has various other functions which are often simultaneously present in the formulation resulting in economical advantages. It can perform as suspending aid, stabilizers, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 28 - 30% Viscosity, 2% in Water, @ 20degC: 12 - 18 cP Hydroxypropoxyl: 7.0 - 12.0% Forms a semi firm gel texture Thermally gel in solution Reversible hot water gelation

METHOCEL™ E5 Premium LV

METHOCEL™ E5 Premium LV is a Hydroxypropyl Methylcellulose (HPMC) thickener which yields a very low viscosity of 5 cP. It is a pharmaceutical grade.

METHOCEL™ E5 Premium LV is a water-soluble polymer derived from cellulose. This pharmaceutical grade can be used in Industrial applications. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 4.0 - 6.0 cP Methoxyl: 28.0 - 30.0% Hydroxypropoxyl: 7.0 - 12.0% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras This grade can be used in Industrial applications.

METHOCEL™ F4M

METHOCEL™ F4M is a Hydroxypropyl Methylcellulose (HPMC) thickener. At addition levels of 2 to 3% it yields a viscosity of 4,000 cP. It is widely used in ceramics processing, coatings, adhesives and chemical processing.

METHOCEL™ F4M is a water-soluble polymer derived from cellulose. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation METHOCEL™ is an economical preferred choice versus other polymers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 3,500 - 5,600 cP Yielding optimum performance at a lower concentration Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ F4M Food Grade

METHOCEL™ F4M Food Grade has the same characteristics as METHOCEL™ F4M, except its compliance with Food standards.

METHOCEL™ F4M Food is a water-soluble polymer derived from cellulose. This grade complies with the most common Food standards. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 3,500 - 5,600 cP Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Yielding optimum performance at a low concentration Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ F4M Premium

METHOCEL™ F4M Premium is a pharmaceutical grade with the same properties as F4M.

METHOCEL™ F4M is a water-soluble polymer derived from cellulose. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 2,663 - 4970 Methoxyl: 27.0 - 30.0% Hydroxypropoxyl_ 4.0 - 7.5% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras Limited for use in Industrial applications

METHOCEL™ F50

METHOCEL™ F50 is a low viscosity Hydroxypropyl Methylcellulose (HPMC) thickener with a low substitution. It yields viscosity of 50 cPs and forms a semi-firm gel.

METHOCEL™ F50 is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier, further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 40 - 60 cPs Gelation Temp 62-68 °C Forms a semi-firm gel Reversible hot water gelation

METHOCEL™ F50 Food Grade

METHOCEL™ F50 Food Grade has the same characteristics as F50, this grade is compliant with the main Food standards.

METHOCEL™ F50 is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier, further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages compared with other polymers, because multiple properties are present simultaneously. Methoxyl: 27.0 - 30.0% Hydroxypropoxyl: 4.0 - 7.5% Viscosity, 2% in water @20°C: 40 - 60 cPs Moisture: 5.0% Max Residue on Ignition: 1.5% Max Sulfiting Agents, as Sulfur Dioxide: 10 ppm Max Lead: 2 ppm Max Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Gelation Temp 62-68 °C Forms a semi-firm gel Reversible hot water gelation Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Use in Industrial application where Food grade is required.

METHOCEL™ J12MS

METHOCEL™ J12MS is a surface treated HPMC resulting in delayed viscosity build up to 12,000 cPs. It has one of the highest substitution levels.

METHOCEL™ J12MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydropropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 10,000 - 16,500 cPs

METHOCEL™ J75MS

METHOCEL™ J75MS is a Hydroxypropyl Methylcellulose (HPMC) thickener with very high substitution. Is has a viscosity range from 60,000 to 75,000 cPs at low addition levels. This grade is surface treated with a slow viscosity build up.

METHOCEL™ J75MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydroxypropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 60,000 - 90,000 cP Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K100LV

METHOCEL™ K100LV is a hydroxypropyl methylcellulose (HPMC) thickener with low substitution. It has a low viscosity of 100 cP at low addition levels.

METHOCEL™ K100LV is a low viscosity methylcellulose polymer. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 80 - 120 cP Moisture, as packaged: 3.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K15M

METHOCEL™ K15M is a HPMC thickener with low substitution. It yields a viscosity of 15,000 cP and forms a soft gel texture. This Methocel has the highest gelation temperature of 70°C-90°C (158°F-194°F).

METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K15M Food Grade

METHOCEL™ K15M Food Grade is the same as K15M, but is compliant with international Food standards.

METHOCEL™ K15M Food grade is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 11,250 - 21,000 cPs Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Can be used in Industrial applications.

METHOCEL™ K15MS

METHOCEL™ K15MS is similar to K15M, except it is surface treated for a retarded dissolution.

METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Delayed dissolution Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

METHOCEL™ K4M

METHOCEL™ K4M ia a hydroxypropyl ethylcellulose (HPMC) thickener with a low substitution. It has a viscosity of 4,000 cP at low addition levels.

METHOCEL™ K4M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 12,000 - 21,000 cP Sodium Chloride: 2.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

Methyl Acrylate

Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

NPG 90

Consisting of 90% NPG, and 10% water, this glycol offers a balance of hardness &amp; flexibility characteristics, as well as excellent thermal stability.

Eastman NPG™ 90 glycol is a liquid at above 38°C to form high quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It is also used as an intermediate to formulate synthetic lubricants. In the U.S., NPG can legally be used for food contact coating applications under federal food additive regulations. Appearance @ 38°C (100°F): Liquid Appearance @ 150°C (77°F): Slurry Crystallization point: 31°C (88°F) Flash point: 132°C (270°F) Boiling point: 100-121°C (212-250°F) Specific gravity @ 60°C: 0.94 CAS: 126-30-7 (90%) CAS: 7732-18-5 (10%) Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.

NPG Platelets

Provides excellent weathering and fluidization characteristics.

Eastman NPG™ platelets is a glycol commonly used for high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It can be used as the sole glycol component or used in conjunction with other modifiers to achieve your desired properties. It can be used for food contact coatings in the United States under feral food additive regulations. Appearance: White platelets Molecular weight: 104.15 Crystallization point: 31°C (88°F) Melting point: 124-130°C (255-266°F) Boiling point: 210°C (410°F) Flash point: 132°C (270°F) Specific gravity @ 20°C/20°C: 1.06 CAS: 126-30-7 Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.

POLYOX™ WSR 1105

POLYOX™ WSR 1105 is a polyethylene oxide thickener. It is a water-soluble resin with a viscosity of 8,800 to 17,600 cP.

POLYOX™ WSR 1105 has a molecular weight of 900,000 and has the highest viscosity in the POLYOX range. It is widely used as binder, lubricant, thickener and water retention aid. It forms flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 8800- 17600 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity

POLYOX™ WSR 205

POLYOX™ WSR 205 is a water-soluble thickener with a molecular weight 600,000. The viscosity ranges from 4,500 to 8,800 cP.

POLYOX™ WSR 205 is a polyethylene oxide with a viscosity of 4500 - 8800 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 6800 - 8800 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301

POLYOX™ WSR 301 is a water-soluble resin with a high molecular weight of 4,000,000.

POLYOX™ WSR 301 is a polyethylene oxide (PEO) with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper, adhesives, building and construction. In Concrete, It works as a flow aid in pumped, lightweight, spray and underwater concrete. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% High binding efficiency Crosslinkable Viscoelastic Flow and pumpability aid Lubrication aid Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 301 Fine Powder NF

POLYOX™ WSR 301 Fine Powder NF has same characteristic as POLYOX™ WSR 301, except this grade is pharma compliant.

POLYOX™ WSR 301 is a polyethylene oxide with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% National Formulary Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 303

POLYOX™ WSR 303 has a molecular weight 7,000,000 and the viscosity ranges from 7,500 to 10,000 cP.

POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 7500 - 10000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR 308

POLYOX™ WSR 308 is a polyethylene oxide thickener. It has a high molecular weight of 8,000,000 and a viscosity range of 10,000 to 15,000.

POLYOX™ is a water-soluble resin and used as binder, lubricant, thickener and water retention aid in various applications. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. POLYOX™ WSR 308 has the highest molecular weight of the POLYOX range. Viscosity: 10000 - 15000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic Available in 140 lb and 960 lb drums

POLYOX™ WSR N10

POLYOX™ WSR N10 is a polyethylene oxide and water soluble thickener. It has a molecular weight of 100,000 and yields a viscosity of 12 to 50 at moderate addition levels.

POLYOX™ are water-soluble resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 has the lowest molecular weight of the POLYOX™ range and used where lower viscosity is required. It is a recommended grade for seed coatings. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N10 100 Mesh

POLYOX™ WSR N10 100 Mesh has the same properties than POLYOX™ WSR N10 100, except this has finer particles.

POLYOX are water-soluble polyethylene oxide resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 mesh has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. This mesh grade has a smaller particle size. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N12K

POLYOX™ WSR N12K is a water-soluble polymer and has a molecular weight of 1,000,000. It yields a viscosity of 400 to 800 cP at 2% addition level.

POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N12K has a relative low viscosity of 400-800 cP. Viscosity: 400 - 800 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000

POLYOX™ WSR N3000 is a water-soluble resin with a relative high molecular weight of 400,000. It yields a viscosity of 2,250 to 4,500 at moderate addition levels.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N3000 LS

POLYOX™ WSR N3000 LS has the same characteristics as POLYOX™ WSR N3000, except LS version has a low silicon dioxide level of less than 1.5WT%.

POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.0 - 1.5 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N60K

POLYOX™ WSR N60K is a PEO polymer with a molecular weight of 2,000,000.

POLYOX™ WSR 60K is a polyethylene oxide with a viscosity of 2000 - 4000 cP in a 2% aqueous solution. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2000 - 4000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N750

POLYOX™ WSR N750 is a water-soluble thickener with a molecular weight of 300,000. It has a viscosity range of 600 to 1,200 in a 5% solution.

POLYOX™ WSR N750 is widely used as seed coatings, wet-tack in paper adhesives, thickener in industrial cleaning products and coatings and paint removers for building and construction. In fluorescent lamp phosphors the N750 is used as binder. POLYOX™ is a polyethylene oxide thickener and water-soluble. Is functions as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Viscosity: 600 - 1,200 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

POLYOX™ WSR N80

POLYOX™ WSR N80 is a water-soluble PEO thickener with a molecular weight of 200,000. It has a low viscosity of 65 to 115 cP.

POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N80 is one of the lower molecular weight grades of the POLYOX™ range. Viscosity: 65 - 115 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

ROCIMA™ 586

A dual in-can bacteriacide / fungicide based on bronopol and CMIT / MIT chemistry. This product is approved for certain industrial uses (see federal label).

DuPont Industrial microbicides are a collection of in-can and thin-film preservatives that are appropriate for a multitude of product applications. Physical state: Clear liquid Color: light yellow pH: 4 - 4.5 Melting point/range: -2°C (28 °F) Flash point: >100 °C (212 °F) Broad spectrum activity Two different modes of biocidal activity Fast-acting Enhanced stabilization of CMIT VOC-free formulation Monovalent stabilization FDA and BfR clearances Paints & coatings, adhesives, paper & paperboard at lower pH ranges

ROCIMA™ BT 2S

A preservative based on 19% benzisothiazolinone (BIT) solubilized in dipropylene glycol (DPG) approved for various industrial uses

DuPont industrial microbicides are a collection of in-can and thin film preservatives that are appropriate for a multitude of product applications. Physical state: liquid clear Color: Yellow to brown Odor: Mild odor pH: 12 - 13 Melting point/range: -40 °C (-40°F) Boiling point (760 mmHg): 100 °C (212°F) Flash point: >93 °C ( 199°F) Vapor Pressure: 12.2 mmHg at 25 °C (77°F) Relative Density (water = 1): 1.13 at 25°C (77°F) Broad-spectrum activity Ease of handling Good compatability in aqueous compositions Low toxicity Excellent chemical stability in high pH systems Coating Preservatives, Adhesive Preservatives, Building and Construction Preservatives, Agriculture

Sodium PYRION™ 40%

Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

Solus™ 2100

Solus™ 2100 is a performance additive for alkyd systems. It improves dry time and hardness development while maintaining the chemical resistance in coatings.

Solus™ 2100 is a performance additive designed for high-solids solvent-borne systems. Solus™ enables formulators to develop VOC-compliant coatings while reaching high performance. It provides faster dry time and reduces contamination on the coating's surface resulting in more efficiency. It has benefits in 2K-PU, UV resins, and acrylic lacquers. Faster dry-to-touch time Excellent anti-sag behavior Wider window of polishability Improved gloss after polishing Ease of sanding

Solus™ 2300

Solus™ 2300 is similar to Solus™ 2100 except it has a higher glass transition temperature.

Solus™ 2300 is a performance additive designed for high-solids solvent-borne systems. Solus™ enables formulators to develop VOC-compliant coatings while reaching high performance. It provides faster dry time and reduces contamination on the coating's surface resulting in more efficiency. It has benefits in 2K-PU, UV resins, and acrylic lacquers. Faster dry-to-touch time Excellent anti-sag behavior Wider window of polishability Improved gloss after polishing Ease of sanding

TBAA (Dimethylethyl Oxobutanoate)

Reagent used in coatings utilizing polyesters, acrylics, cellulosics, and epoxies.

Eastman™ TBAA (T-Butyl-Acetoacetate) provides room temperature cure and isocyanate-free crosslinking in many coating applications. It can also be used as a reagent in pharmaceuitical, agrichemical, and pigment applications. Appearance: Liquid Molecular weight: 158.20 Flash point: 66°C (151°F) Boiling point: 190°C (374°F) Specific gravity @ 20°C/20°C: 0.954 CAS: 1694-31-1 Increased adhesion to metal substrates Low glass transition resulting in increased coating flexibility Reacts with conventional crosslinkers Reduces viscosity in resins to meet lower VOC emissions Used in adhesives, sealants, architectural coatings, paints, coatings, and intermediate manufacturing in pharmaceuiticals and agriculture.

TMPD Platelets

Solid, white irregularly shaped platelets at room temperature. Also available in molten form for easier handling when heated to 115°F.

Eastman TMPD™ platelets is a white, waxy solid used to formulate coatings and unsaturated polyester laminating resins. TMPD™ is ideal for formulating high solids and low VOC coatings. Appearance (molten): Clear, clean liquid Molecular weight: 146.22 Melting point: 46-55°C (114.8-131°F) Crystallization point: 31°C (88°F) Flash point: 113°C (235°F) Boiling point @ 760 mm Hg: 220-235°C (428-455°F) Specific gravity @ 55°C/15°C: 0.928 CAS: 144-19-4 Very stable in waterborne polyester formulations Excellent chemical, stain, and humidity resistance Low viscosity and density allowing excellent solubility in solvents Outstanding corrosion resistance in fiberglass-reinforced plastic applications Used to formulate liquid coatings for metal office furniture, automotive, industrial maintenance, and general metal applications. Other applications include detergent additive, hard surface cleaner, plasticizer intermediate, and synthetic lubricants.

Trilene® 65

Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.

Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Trilene® 67

Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 9.5% diene content for use in rubber, coatings and adhesives.

Trilene® 67 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 67 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 67 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 46/54 Degree of Unsaturation (% Diene): 9.5% Type of Diene: ENB Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 39,000 Brookfield Viscosity (cP, RVT #7 at 60°: 900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 128,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Trilene® 77

Low molecular weight Ethylene Propylene (EPDM) terpolymer with 10.5% diene content for use in rubber, coatings and adhesives.

Trilene® 77 is a crystalline waxy EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 77 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 77 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Trilene® 77 is easier to handle during mixing compared to Trilene® 65 and 67 since it is a solid at room temperature. Ethylene/Propylene: 74/26 Degree of Unsaturation (% Diene): 10.5% Type of Diene: ENB Color: Pale Yellow, Waxy solid Specific Gravity: 0.86 Molecular Weight by GPC (Da): 27,000 Brookfield Viscosity (cP, RVT #7 at 60°: 800,000 Brookfield Viscosity (cP, RVT #7 at 100°: 102,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process East to weigh before mixing Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

Tyzor® 212, zirconium chelate

A water stable zirconium chelate with ca. 52% active ingredient in 1-propanol solution.

Tyzor 212 is a clear, slightly viscous yellow liquid with 52% active ingredient which is stable in water for extended periods. It reacts with water by hydrolysis to form a reactive hydroxy zirconium chelate which can form bonds with organic -OH and -COOH groups of many polymeric carbohydrates such as cellulose, guar derivatives and starch. Strong gels can be formed by crosslinking. Tyzor 212 can also act as an adhesion promoter to -OH functional surfaces. Zr Content: 12% Active Content: 52% Color: Yellow Solvent: n-propanol Specific Gravity (25C): 1.06 Freezing Point: <-25C Boiling Point: 97C (Solvent) Flash Point: 22C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Miscible In oil well fracturing fluids, Tyzor 212 can be used in pH 8.5-11 fluids and acts as a delayed crosslinking agent that initiates above 49C (120F). It's an effective crosslinker for dispersions of guar and it's derivatives to form high viscosity aqueous gels. For coatings, inks and paints applications, see increased film strength, adhesion promotion and rheology control. Due to it's great water compatibility and low color generation, Tyzor 212 also functions well over a wide range of pH.

Tyzor® 217, zirconium lactate

A water based zirconium chelate with pH around 7 stable in water.

Suitable for crosslinking carbohydrates such as cellulose, starch, guar and other functionalized polymers like polyvinyl alcohol. Tyzor 217 also functions as a surface modifier and adhesion promoter on paper, glass, metal, pigments and other materials with oxidized surfaces. Zr Content: 5.4% Color: Pale Yellow Solvent: Water Specific Gravity (25C): 1.2 g/mL Freezing Point: 0C Boiling Point: 100C Flash Point: None Solubility in Water: Fully Miscible No Voc Content Low toxicity Cross-linking agent for dispersions of guar to form high viscosity aqueous gels used in oil well fracturing applications Cross links pigements and binders in waterborne paints and printing inks Adhesion promoter in metal, glass, fillers and pigments to increase compatibility and modify physical properties Modifies surface of paper and sysnthetic nonwovens to increase hardness and decrease hydrophilicity

Tyzor® 9000

Tyzor™ 9000 is a colorless to yellowish reactive organic alkoxy titanate liquid with a 100% active content.

Tyzor 9000 improved crosslinking of polymers, adhesion promotion and the formation of polymeric titanium dioxide layers as binders or coatings. It can also act as a Lewis acid catalyst in applications such as condensation, esterification, transesterification and addition reactions. TiO2 Content: 23.9% Active Content: 100% Molecular Weight: 340 g/mol Color: Yellow Specific Gravity (25C): 0.9 Viscosity (25C): 140 mPa*s Pour Point: -40C Boiling Point: >100C (Decomposes) Flash Point: 60C Refractive Index: 1.444 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Quickly In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, corrosion resistance and adhesion in coating applications In Crosslinking Crosslinks with polymers or binders containing -OH and -COOH functional groups. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity

Tyzor® AA, titanium acetylacetonates

A liquid titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water for short periods of time.

Tyzor AA is typically used for adhesion promotion, but also frequently used for crosslinking in non-aqueous systems, catalysis and surface modification. They are soluble and or miscible in organic solvents or products like ethanol, isopropanol, butanol, ethyl acetate, IPA, methyl ethyl ketone and acetone. TiO2 %: 16.5 Active Content %: 75 Form: Liquid Color: Yellow to Red Solvent: 25% IPA Specific Gravity: 0.99 Viscosity, mPa: 10 Pour Point C(F): 0(32) Boiling Point C(F) Solvent: 82(179.6) Flash Point C(F): 12(53.6) Solubility: Miscible in most organic solvents. Decomposes in water Improved drying, solvent resistance, heat resistance adhesion to substrates such as aluminum and polyolefin foils in printing applications. Elimination of by products, high yield and easy work up in esterification and transesterification under mild conditions. Improved surface hardness, dispersibility, coloring effects, corrosion protection and heat and light reflection in coating applications. When combined with metal alkoxides, produce metal oxide systems for use as binders or coatings

Tyzor® AA-105

A titanium chelate with acetylacetonate as the chelating agent with an 100% active content.

Tyzor AA-105 is similar to Tyzor AA, but has a TiO2 and active content of 23% and 100% respectively with no solvent content. TiO2 %: 23 Active Content %: 100 Form: Liquid Color: Yellow to Red Solvent: None Specific Gravity: 1.12 Viscosity, mPa: 90 Pour Point C(F): -25(-13) Boiling Point C(F) Solvent: n/a Flash Point C(F): 50(122) Solubility: Miscible in most organic solvents. Decomposes in water See benefits from Tyzor AA

Tyzor® AA-65, titanium acetylacetonates

A titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water and with a pour point of -70°C.

Tyzor AA-65 is similar to Tyzor AA, but has a TiO2 and active content of 15% and 65% respectively. It has a solvent content of 28% IPA and 7% EtOH TiO2 %: 15 Active Content %: 65 Form: Liquid Color: Yellow to Red Solvent: 28% IPA/7% EtOH Specific Gravity: 0.98 Viscosity, mPa: 8 Pour Point C(F): -70(-94) Boiling Point C(F) Solvent: 78(172.4)[Ethanol] Flash Point C(F): 14(57.2) Solubility: Miscible in most organic solvents. Decomposes in water See benefits from Tyzor AA

Tyzor® AA-75, titanium acetylacetonates

A titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water and with a pour point of -5°C.

Tyzor AA-75 is similar to Tyzor AA, but with specific gravity of 1.02 and viscosity 11 mPa. TiO2 %: 16.5 Active Content %: 75 Form: Liquid Color: Yellow to Red Solvent: 25% IPA Specific Gravity: 1.02 Viscosity, mPa: 11 Pour Point C(F): -5(23) Boiling Point C(F) Solvent: 82(179.6) Flash Point C(F): 12(53.6) Solubility: Miscible in most organic solvents. Decomposes in water Improved drying, solvent resistance, heat resistance adhesion to substrates such as aluminum and polyolefin foils in printing applications. Elimination of by products, high yield and easy work up in esterification and transesterification under mild conditions. Improved surface hardness, dispersibility, coloring effects, corrosion protection and heat and light reflection in coating applications. When combined with metal alkoxides, produce metal oxide systems for use as binders or coatings.

Tyzor® BTM

Tyzor™ BTM is similar to Tyzor 9000, but with a viscosity of 65 cp and a boiling point of 246°C.

See Tyzor 9000. Can also be used in polymerization reactions. TiO2 Content: 14% Active Content: 100% Molecular Weight: 340 g/mol Color: Yellow Specific Gravity (25C): 0.99 Viscosity (25C): 65 cp Pour Point: -70C Boiling Point: 246C Flash Point: 47C Refractive Index: 1.493 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Quickly See Tyzor 9000. Also a useful catalyst in Ziegler-Natta reactions in the synthesis of polyolefins.

Tyzor® CLA, titanium chelate

A titanate with chelating agents in isopropanol. It hydrolyzes to form a water stable chelate.

Tyzor CLA forms a reactive hydroxy titanium chelate by way of hydrolysis with water which is stable in water for extended periods. They can also form bonds with organic -OH and -COOH groups of many polymeric carbohydrates such as cellulose, guar derivatives and starch. CLA also acts as a Lewis acid catalyst in processes like transesterification, esterification, condensation and addition reactions. TiO2: 15% Active Content: 77% Color: Yellow to Amber Solvent: Isopropanol Specific Gravity (25C): 1.02 g/mL Boiling Point: 82C (Solvent) Flash Point: 13C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Miscible In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Oil well fracturing Forms high viscosity aqueous gels used in oil well fracturing by acting as an effective crosslinker for dispersion of guar and its derivatives Paints Crosslinks the binders in waterborne paints and carbohydrate coated latex particles for highly viscous thixotropic paints

Tyzor® EHTAA

Tyzor EHTAA is a titanium chelate with acetylacetonate as a chelating agent and 66% active content in 2-ethylhexanol.

EHTAA is a clear amber to orange slightly viscous liquid soluble in water for a short period of time. It can improve adhesion promotion, crosslinking of functional polymers or used to form polymeric titanium dioxide layers as a binder or coating. It can also act as a Lewis acid catalyst in Transesterification, esterification, condensation and addition reactions. They can also be used as additives in paint to crosslink functional polymers to binders, promote adhesion or bind to itself TiO2: 10.6% Ti Content: 6.3% Active Content: 66% Color: Yellow to Amber Solvent: 2-Ethylhexanol Specific Gravity (25C): 0.94 g/mL Boiling Point: 185C (Solvent) Flash Point: 54C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Partly Miscible In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, corrosion resistance and adhesion in coating applications In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Printing inks See improved drying rates, increased solvent resistance, heat resistance, adhesion and crosslinking to various substrates in solvent based printing inks

Tyzor® ET, ethyl titanate

A pale yellow tetra ethyl titanate liquid with 100 % active content sensitive to moisture.

Tyzor ET is a solvent free titanate with a small amount of isopropoxy groups to keep the product liquid. It has the highest titanium content of all the tyzor products. Tyzor ET can be used in esterification, transesterification, condensation and addition processes as a Lewis acid catalyst. It is also an effective adhesion promoter, crosslinking agent and can also form polymeric titanium dioxide layers used as a binder or coating. TiO2 Content: 34 % Active Content: 100 % Color: Light Yellow Density (20C): 1.09 g/mL Viscosity (20C): 70 mPa*s Pour Point: -40C Boiling Point: 153C Flash Point: 40C Refractive index: 1.51 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Solubility in Solvents: Miscible in most organic solvents Similar to features and benefits of Tyzor BTP

Tyzor® GBA, titanium acetylacetonates

A titanium chelate with acetylacetonate as the chelating agent with a 16.4% TiO2 content.

Tyzor GBA can be applied as a coating primer, additive or in sol-gel systems as a base material. It can also act as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 %: 16.4 Active Content %: 75 Color: Orange to Red Solvent: Isopropanol, Butanol, Methanol Specific Gravity: 1.02 Viscosity, cps: 60 Pour Point C: -42 Boiling Point C: 70 Flash Point C: 12 Solubility in solvents: Miscible in most organic solvents Solubility: Decompose Excellent crosslinker and adhesion promoter in solvent based inks. Additional benefits in inks include improved dry rates, adhesion, solvent and heat resistance. In coating applications, glass, metals, fillers and pigments can be treated with Tyzor GBA to give increased adhesion promotion, surface hardness, scratch resistance, heat and light reflection and corrosion resistance. Act as additives to aid in crosslinking -OH and -COOH functional polymers or binders. Tyzor GBA also eliminate by products, increase yield, easy work-up and low catalyst concentration in esterification and transesterification of various esters and polyesters. These benefits also extend to addition reactions for polyurethanes

Tyzor® GBO, titanium acetylacetonates

A titanium chelate with acetylacetonate as the chelating agent with a 12.7% TiO2 content.

Similar to Tyzor GBA TiO2 %: 12.7 Active Content %: 60 Color: Orange to Red Solvent: Isopropanol, Butanol, Methanol Specific Gravity: 0.95 Viscosity, cps: <10 Pour Point C: <-42 Boiling Point C: 70 Flash Point C: 12 Solubility in solvents: Miscible in most organic solvents Solubility: Decompose Similar to Tyzor GBA

Tyzor® LA, titanium chelate

A stable water based titanium chelate excellent for use in aqueous systems. Tyzor LA is stable at pH around 7-8.

Tyzor LA can be used as a catalyst in transesterification, esterification and condensation applications. It can also be used as a cross linking agent for OH functional polymers, adhesion promoter and aid in the formation of polymeric titanium dioxide as a binder or coating. TiO2 Content: ca. 13.6% Active Content: ca. 50% Color: Colorless to light Density (25C): ca. 1.21/ml Viscosity (25C): ca.9 mPa*s pH: ca. 8-9 Pour Point: ca. -10C Boiling Point: ca. 100 (water) C Flash Point: None Solubility in Water: Miscible

Tyzor® NBZ, zirconium tetra-n-butanolate

Tyzor NBZ is a yellowish, highly reactive organic alkoxy zirconate with 87% active content in n-butanol.

Tyzor NBZ is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity ZrO2 Content: 28 % Active Content: 87 % Color: Yellow Molecular Weight: 383 g/mol Density (20C): 1.07 g/mL Viscosity (20C): 100 mPa*s Pour Point: -70 C Boiling Point (@10 mmHg): 117 C (Solvent) Flash Point: 35 Refractive Index: 1.51 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions to result in products like acrylic esters, polyesters and plasticizers. Benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives NBZ can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder or promote adhesion. In Pigments and Films Can be used to Micro or nano scale ZrO2 pigments used to create polymeric ZrO2 films on surfaces via pyrolytic or hydrolytic processes

Tyzor® NPT, titanium tetrapropanolate

A highly reactive clear colorless liquid organic alkoxy titanate with 100% active content

Similar to Tyzor BTP TiO2 Content: 28.1 % Active Content: 100 % Color: Colorless to Yellow Molecular Weight: 284 g/mol Density (20C): 1.05 g/ml Viscosity (20C): 190 mPa*s Pour Point: -50C Boiling Point: 170C Refractive Index: 1.5 Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Similar to Tyzor BTP. It can also be used in Zieglar-Natta catalysts for olefin polymerization.

Tyzor® NPZ, ziconium tetra-n-propanolate

A yellowish to tan, highly reactive organic alkoxy zirconate with 74 % active content in n-propanol.

Tyzor NPZ is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity TiO2 Content: 28 % Active Content: 74 % Color: Yellow to tan Molecular Weight: 324 g/mol Density (20C): 1.07g/mL Viscosity (20C): 80 mPa*s Pour Point: -70 C Boiling Point (@10 mmHg): 97 C (Solvent) Flash Point: 23 Refractive Index: 1.445 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions to result in products like acrylic esters, polyesters and plasticizers. Benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity Oil & Gas fracturing Effective crosslinker for dispersion of guar and it's derivatives to form high viscosity aqueous gels used in fracturing applications. In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives NPZ can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder or promote adhesion. In Pigments and Films Can be used to Micro or nano scale ZrO2 pigments used to create polymeric ZrO2 films on surfaces via pyrolytic or hydrolytic processes

Tyzor® OGT, octyleneglycol titanate

A reactive organic alkoxy titanate with 100% active content less sensitive to moisture than Tyzor TPT and TnBT

Similar to Tyzor BTP TiO2 Content: 12.7% Active Content: 100 % Color: Colorless to Yellow Density (20C): 1.03 g/mL Viscosity (20C): 3500 mPa*s Pour Point: -55C Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Similar to Tyzor BTP It can also act as a binder itself, used as an additive in sealants to crosslink -OH or -COOH functional polymers, binders or promote adhesion.

Tyzor® PITA SM

Tyzor™ PITA SM is a mixture of titanium ethyl acetoacetate complex with 100% active content and methyl-trimethoxy silane.

Tyzor PITA-SM is designed as a curing agent for silicone based sealants and adhesives. Its high reactivity at low temperatures enables it to react with common functional groups such as R-OH, M-OH, SiOH, or R-COOH to effect cure rate, crosslinking and adhesion promotion. TiO2 Content: ca. 15.2% Active Content: ca. 80% Color: Yellow to Orange Density (20 C): ca. 1.08 g/ml Viscosity (20 C): ca. 8 mPa*s Pour Point: < -10 C Boiling Point: ca. 102 C (Solvent) Flash Point: ca. 32 C Solubility in Solvents: Miscible in most organic solvents Solubility in water: Decomposes Tyzor PITA-SM in silicone sealants and adhesives promotes adhesion, crosslinks silanes, increases cure rate and acts as a drying agent. It can also provide these benefits when used with silanol end-capped polymers such as polypropylene oxides, acrylates, or polyurethanes. They can also be used as additives in paints to cross-link functional polymers or binders, act as binders or promote adhesion.

Tyzor® TE, triethanolamine Titanate

A triethanolamine titanium complex with 80% active ingredient in alcohol solvent. It hydrolyzes to form a water stable chelate.

Tyzor TE forms a reactive hydroxy titanium chelate by hydrolysis with water. This chelate is stable in water for extended periods. When crosslinked with polymers such as carbohydrates, strong gels can be formed. Tyzor TE can act as adhesion promoters to oxidized surfaces. They can also be used as Lewis acid catalysts in processes such as esterification, transesterification, condensation and addition reactions. TiO2 Content: ~13.7% Active Content: 80% Color: Light Yellow Density (25 C): 1.06 g/ml Viscosity (25 C): 350 mPa*s Pour Point: -47 C Boiling Point: 85 C Flash Point: 16 C In esterification, transesterification, condensation and addition reactions, expect moderate reaction rates, high yield, easy work-up, low toxicity and low catalyst concentration. It's an effective crosslinking agent for pigments and binders in waterborne paints, carbohydrate coated latex particles for viscous thixotropic paints and dispersions of guar and its derivatives to form highly viscous aqueous gels used in oil well fracturing.

Tyzor® TEAZ, zirconium chelate

A yellow to brown ethanolamine zirconium complex with 100% active content.

Tyzor TEAZ forms a reactive hydroxy zirconium chelate via hydrolysis with water which is stable in water for extended periods of time. The hydrated chelate can from complexes with organic -OH and -COOH groups. Strong gels may be formed by crosslinking with multifunctional polymers such as cellulose, starch and guar derivatives. They can also act as adhesion promoters to oxidized surfaces. Tyzor Teaz is also useful as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 Content: 17.9 % Active Content: 100 % Color: Yellow to Brown Density (20C): 1.34g/mL Viscosity (20C): 50,000 mPa*s Flash Point: >100 C Refractive Index: 1.53 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Miscible In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions. Primarily suited for direct esterification processes due to it's great compatibility with water byproducts. Benefits include moderate reaction rates, increased yield, easy work up, low catalyst concentration and low toxicity Oil & Gas fracturing Effective crosslinker for dispersion of guar and it's derivatives to form high viscosity aqueous gels used in fracturing applications. In Thixotropic paints Crosslinking agent in carbohydrate coated latex particles for high viscous thixotropic paints Water borne Paints Crosslinks binders in water borne paints

Tyzor® TnBT, tetra-n-butyl titanate

A Lewis acid catalyst and highly reactive organic alkoxy titanate with 100% active content.

Excellent as cross-linking agent or effective adhesion promoter to polymers. Also forms polymeric titanium dioxide layers used as a binder or coating. Tyzor TnBT can be used as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 Content: 23.5 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 340 g/mol Density (20C): 0.99g/mL Freezing Point: -70C Boiling Point (@10 mmHg): 183C Flash Point: 47C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives TnBT can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder itself or promote adhesion. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes

Tyzor® TOT, tetra-2-ethylhexyl titanate

A clear to yellowish reactive organic alkoxy titanate with 100% active content, but less sensitive to moisture than TPT or TnBT

Similar to Tyzor TnBT TiO2 Content: 14.4 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 564 g/mol Density (20C): 0.92g/mL Viscosity (20C): 140 mPa Boiling Point (@10 mmHg): 249C Flash Point: 60C Refractive Index: 1.482 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Similar to Tyzor TnBT

Tyzor® TPT 20B, tetra-isopropyl titanate

A highly reactive organic alcoxy mixture of Tyzor TPT and TnBT. A clear to yellowish liquid that is very sensitive to moisture.

Similar to Tyzor TPT. Very low pour points (< 30C) compared to Tyzor TPT TiO2 Content: 27.1 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 564 g/mol Density (20C): 0.97g/mL Viscosity (20C): 20 Freezing Point: <-30 Boiling Point (@10 mmHg): 220C Flash Point: 42 Refractive Index: 1.482 Solubility in Solvents: Miscible Solubility in Water: Decomposes Similar to Tyzor TPT

Tyzor® TPT, tetra-isopropyl titanate

A 100% active colorless to yellowish liquid, highly reactive organic alkoxy titanate with a freezing point of 19C

Excellent as cross-linking agent or effective adhesion promoter to polymers. Also forms polymeric titanium dioxide layers used as a binder or coating. Tyzor TnBT can be used as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. If crystallization occurs, the product can be re-dissolved by warming and agitation. TiO2 Content: 28.1 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 284 g/mol Density (20C): 0.95g/mL Viscosity (20C): 3.5 mPa*s Freezing Point: 19C Boiling Point (@10 mmHg): 232C Flash Point: 56C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Tyzor TPT is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives TnBT can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder itself or promote adhesion. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes

Zinc PYRION™ 48% MPF

Aqueous solution of zinc pyrithione with low water solubility and highly effective for applications where low level of leaching and longevity of protection is required.

Zinc Pyrion MPF 48% is a Micronized Preservative Free suspension of Zn-Pyrithione in water. This wide range & highly active biocide inhibits the unwanted growth of fungi, yeast, mold, and other microbial organisms. Appearance: Off-white suspension Density at 21⁰C/70⁰F: 1.28 g/cm3 (10.68 lb/gal) Viscosity at 21⁰C/70⁰F: 157.5 mPa.s at 100s-1 Color: L*: min. 75, a*: -3 to +1, b*: max. 5 Particle size: D100 ≤ 5 μm; D90 ≤ 1 μm pH, 5% w/w in pH 7 water: 6.5 – 9.0 Zinc content: 9.3 – 11.3 % w/w Must store above 10⁰C (50⁰F) Degradation occurs at temperatures above 240⁰C EPA registered Exceptional microbial control in a wide range of applications Ease of application in aqueous solution Testing available to gauge efficacy of antimicrobial growth for final product Zinc pyrithione is commonly used to prevent degradation caused by microbial growth in a wide range of industrial applications. Formulations will differ by composition, application and susceptibility of microbial attack. It is recommended to test biocide levels at multiple treat rates (3000, 4000, 5000 ppm) to gauge efficacy in particular applications. Industry standard laboratory testing is available from Janssen to help with particular formulation questions.

Zinc PYRION™ Powder

Powdered dry-film preservative (zinc pyrithione) that provides antimicrobial protection in a wide variety of industrial applications.

Zinc Pyrion is a Zinc Pyrithione based preservative for protection against unwanted microbial growth and degradation. The powdered dry-film preservative can be used in a wide range of both indoor & outdoor applications that are susceptible to microbial attack. Typical Properties; Appearance: Light beige to beige powder Purity (Potentiometric Titration): Min. 97.0 wt.% Loss on Drying (105°C): Max. 2 wt.% Particle Size Distribution: D50: max. 10 μm; D99: max. 35 μm Relative Density: 1.8106 at 22.5°C Bulk Density: 0.41 g/ml pH: 6.5 - 8.5 (5% dispersion in water) Vapor Pressure: < 6.6 x 10-4 Pa at 25°C Solubility in Water: 4.93 mg/l at 20.0°C; 6.11 mg/l at 30.0°C Exceptional control against microbial growth Cost effective powder form Full control of formulated treat rate Free testing available to measure efficacy of anti-microbial protection Typical treat rate will vary by application, but it is recommended to test several levels (2000, 3000, 4000, 5000 ppm) to test efficacy of protection. Testing is available via Janssen's laboratory for several industry standard tests.