There are no products found that meet this criteria.

• 

  2-Ethylhexyl Acrylate

  2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.

  Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 399.92lb Drum

• 

  Butyl Acrylate

  Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

  Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 410.0593lb Drum

• 

  CA-394-60LF

  CA-394-60LF is a low odor cellulose acetate with a very high melting point.

  CA-394-60LF provides high strength and good resistance to UV light, hear, oils, and greases in various lacquers. It can be used in lacquers for glass, plastic, wire, and release coatings. ASTM-A viscosity, sec: 24 - 44 Acetyl by titration, wt%: 40.0 +/- 0.5 Moisture, wt%: 5.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters

• 

  CA-398-10

  CA-398-10 is a medium viscosity cellulose acetate. It gives high strength and excellent chemical resistance in coatings and adhesives.

  CA-398-10 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 8.0 - 13.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 44lb Bag

• 

  CA-398-3

  CA-398-3 is the lowest viscosity grade of the cellulose acetate range. It is used as additive in protective coatings for electronics, adhesives and plastic products.

  CA-398-3 provides performance benefits in solvent- and grease-resistant coatings for textile, wire and paper products, barrier and release coatings for adhesives, protective coatings for plastic items and membrane material. Cellulose acetates are only soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 2.0 - 4.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 110lb Drum, 44lb Bag

• 

  CA-398-30

  CA-398-30 is the highest viscosity grade in the cellulose acetate range. It provides valuable properties in protective coatings.

  CA-398-13 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 8.0 - 13.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CA-398-6

  CA-398-6 is a low viscosity cellulose acetate. It can be used as a performance additive in tapes and sealants.

  CA-398-6 offers excellent chemical resistant, a high glass transition temperatures and produce tough and hard films. Cellulose acetates are soluble in strong solvents like acetone, methyl ethyl ketone, and ethyl acetate. They are compatible with plasticizers such as dimethyl phthalate or triacetin. The melting point and harness are relatively high. In membranes cellulose acetates (CA) provide strong, clear, chlorine resistant films. ASTM-A viscosity, sec: 5.0 - 7.0 Acetyl by titration, wt%: 39.8 +/- 0.5 Moisture, wt%: 3.0 (max) Chemical resistant Provides high strength Good weather-ability Non-yellowing Good flow and leveling Pigment dispersion medium Provides metallic pigment control Redissolve resistance Intercoat adhesion Membrane material

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 50lb Pail

• 

  CAB-171-15

  CAB-171-15 has the lowest butyryl content grade in the CAB range, offering superior hardness and toughness.

  CAB-171-15 is a cellulose ester resin with a low butyryl content and high viscosity content. It is one of the toughest CABs. It is recommended for thermoplastic lacquers with a good resistance to chemicals, solvents or heat are required, such as wire coatings, textile coatings, and printable films. This grade has limitations in compatibility though. Viscosity ASTM-A, sec: 14 - 24 Acetyl by GC, wt%: 28 - 31 Butyryl by GC, wt%: 16.5 - 19 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.4 Film toughness Heat resistance Improves flow and leveling Reduces cratering Reduces dry time Provides polishability Improves sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-321-0.1

  CAB-321-0.1 is a cellulose ester resin with a low butyryl content. The low viscosity permits higher solids concentrations.

  CAB-321-0.1 is a cellulose ester resin with a low butyryl content low high viscosity content. Cellulose esters provide excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 14 - 24 Acetyl by GC, wt%: 28 - 31 Butyryl by GC, wt%: 16.5 - 19 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.4 Film toughness Heat resistance Improves flow and leveling Reduces cratering Reduces dry time Provides polishability Improves sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-0.1

  CAB-381-0.1 is a cellulose ester resin with a medium butyryl content and has the lowest molecular weight of the 381 range. This product is designed for use in curing coatings and inks.

  CAB-381-0.1 is with its medium butyryl content soluble and compatible with many resins and plastizers. It provides excellent color and color retention, film toughness, flexible films, flow control and anti-corrosion. Main applications are in curing inks and coatings for metal, wood, textiles, cloth, paper, plastic, and leather. Viscosity ASTM-A, sec: 0.07 - 0.16 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-0.5

  CAB-381-0.5 is a cellulose ester with low viscosity and medium butyryl content. It is designed for relatively high solid applications.

  CAB-381-0.5 is a general purpose cellulose ester and recommended for many types of coatings and inks. It provides excellent color, flexibility, flow control, pigment dispersion and weather resistance. 381 is compatible with many resins and is soluble in low-cost solvent systems. This low viscosity 381 provides wetting and adhesion improvement in inks. In coatings improved metal flake orientation, resistance to redissolve from the topcoat solvents and excellent sprayability are key benefits. CAB-381-0.5 is commonly used in nail coatings for its compatibility, it improves dry-time and flexibility of nail clearcoats. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag, 20kg Bag

• 

  CAB-381-2

  CAB-381-2 is a resin with a high viscosity. It is effective in increasing cold-crack resistance and results in greater film toughness.

  CAB-381-2 is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 1.2 - 2.8 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-2 BP

  CAB-381-2 BP is similar to CAB-381-2 designed to meet the needs of European formulators.

  CAB-381-2 BP is a cellulose ester resin with medium butyryl content and high viscosity level. It improves dimensional stability, better toughness, and mechanical characteristics. It can be used as a film former, as an additive to other film formers, and as a reactive polyol in curing coatings. Viscosity ASTM-A, sec: 0.33 - 0.55 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 36 - 40 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.0 - 2.0 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-20

  CAB-381-20 has the highest viscosity in its range and can be used as both binder and thickener in coatings and inks.

  CAB-381-20 is a cellulose ester resins with medium butyryl content and high viscosity. It provides excellent color, greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 17 - 28 Acetyl by GC, wt%: 12 - 15 Butyryl by GC, wt%: 35 - 39 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-381-20 BP

  CAB-381-20 BP is a slightly modified version of CAB-381-20 designed to meet the needs of European formulators.

  CAB-381-20 BP is a cellulose ester resins with medium butyryl content and high viscosity. It provides greater toughness, better mechanical properties and high cold crack resistance due to improved dimensional stability. CAB-381 products are compatible with many resins and soluble in low-cost solvent systems. Viscosity ASTM-A, sec: 12 -20 Acetyl by GC, wt%: 14 - 17 Butyryl by GC, wt%: 33.0 -38.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.5 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Compliant with European standards

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-500-5

  CAB-500-5 has a high butyryl and low hydroxyl content and medium viscosity. It results in flexible films requiring limited amount of plasticizers.

  CAB-500-5 is a cellulose acetate butyrate and used as binder or additive in coatings and inks. With a high butyryl level, CAB-500-5 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It has tolerance for nonpolar aliphatic and aromatic hydrocarbons. Viscosity ASTM-A, sec: 3 - 6 Acetyl by GC, wt%: 2.5 -5 Butyryl by GC, wt%: 49 - 53 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 0.8 - 1.2 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-531-1

  CAB-531-1 is a high butyryl cellulose ester resin. It provides tough films with good marring resistance.

  CAB-531-0.1 is used as binder or additive in coatings and inks. The high butyryl level provides high flexibility, high solubility, good adhesion and compatibility with cross-linking resins and plasticizers. It is used in finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. Viscosity ASTM-A, sec: 1.3 - 2.6 Acetyl by GC, wt%: 2 - 4 Butyryl by GC, wt%: 48 - 52 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.1 - 2.1 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-551-0.01

  CAB-551-0.01 is the lowest viscosity cellulose ester resin with the highest butyryl substitution.

  CAB-551-0.01 is used as binder or additive in coatings and inks. The high butyryl level contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. Due to its low molecular weight, 551-0.01 provides better flow and wetting. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. CAB-551-0.01 can be used by pultruders to enable higher pultrusion speed and prevent internal/external cracking. Viscosity ASTM-A, sec: 0.01 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 50-54 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.6 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Improve pultrusion speed Prevent pultrusion cracking

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-551-0.2

  CAB-551-0.2 is a high butyryl, and relatively low molecular weight resin. It is compatible with numerous cross-linking resins.

  CAB-551-0.2 is cellulose ester used as binder or additive in coatings and inks. With the high butyryl level, CAB-551 contributes to high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is widely used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. It is soluble in monomers, like styrene. CAB-551-0.2 can be used by pultruders to enable higher pultrusion speed and prevent internal/external cracking. Viscosity ASTM-A, sec: 0.16 - 0.25 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 49.0 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 1.4 - 2.4 Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion Improve pultrusion speed Prevent pultrusion cracking Soluble in alcohol

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  CAB-553-0.4

  CAB-553-0.4 is a high butyryl, high hydroxyl cellulose ester resin. It is soluble in alcohols.

  CAB-553-0.4 is used as binder or additive in various types of coatings and inks. The high butyryl level provides high flexibility, high solubility and compatibility with cross-linking resins and plasticizers. It is used in cross-linked finishes to improve dry-to-touch time, reduce cratering, provide better pigment dispersion and improve coating performance. CAB-553 is soluble in alcohol and organic solvents, it even tolerates a substantial portion of water. CAB-553-0.4 is also used in nail care products for its compatibility and solubility in alcohols. it provides improved clear film, flow and dry-time. Viscosity ASTM-A, sec: 0.16 - 0.40 Acetyl by GC, wt%: 4 Max Butyryl by GC, wt%: 44- 50 Free acidity, ppm: 300 Max Moisture, wt%: 3.0 Max Hydroxyl, wt%: 4.0 - 5.0 Soluble in alcohol Improve flow and leveling Reduce cratering Reduce dry time Provide polishability Improve sprayability Pigment dispersion medium Metallic pigment control Redissolve resistance Sag resistance Enhanced color uniformity Decreased sand scratch telegraphing Intercoat adhesion

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag, 20kg Bag

• 

  CELLOSIZE™ EP-09

  CELLOSIZE™ EP-09 is a water-soluble cellulose thickener. It has the lowest viscosity of the CELLOSIZE™ product range of 90-160 cP. EP stands for emulsion polymerization grade.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. EP-09 is surface treated to increase dispersion in water. Viscosity: 90 to 160 cP Volatiles: 6 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-100MH

  CELLOSIZE™ QP-100MH has the highest molecular weight of all CELLOSIZE products. This grade provides a high thickening efficiency.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-100MH is widely used as thickener and yields a viscosity of 4,400 tp 6,000 cP. This grade provides the most pseudoplastic rheology and very effective where high thickening is desired. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 1.50 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective thickener Film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 25kg Bag, 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-15000H

  CELLOSIZE™ QP-15000H is a cellulosic thickener with a medium molecular weight. As a general purpose thickener it is used in coatings, cleaners and adhesives.

  CELLOSIZE™ QP-15000H EUR yields a viscosity of 1,100 to 1,500 cP. CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 1,100 to 1,500 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-300

  CELLOSIZE™ QP-300 is a hydroxylethyl cellulose (HEC) polymer with a medium viscosity of 300-400 cP. It can be used as a thickener and film former.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 300 to 400 cP Volatiles: 5.0 wt% Max Water insolubles: 0.07 wt% Max Particle size (through #20 mesh): 98% minimum Water-soluble Nonionic Thickener Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-30000H

  CELLOSIZE™ QP-30000H is a general purpose thickener with a high molecular weight. It yields viscosity of 1,500-2,400 cP at low addition levels.

  CELLOSIZE™ QP-30000H is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. CELLOSIZE™ QP-30000H has a medium molecular weight. Viscosity: 1,500 to 2,400 cP Volatiles: 6 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-4400H EUR

  CELLOSIZE™ QP-4400H is a medium viscosity water-soluble cellulosic polymer. This HEC is a general purposed thickener for various applications. It yield a viscosity of 4,800-6,000 cP at low addition levels.

  CELLOSIZE is a hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 4800 to 6000 cP Volatiles: 5 wt% Max Water insolubles: 0.80 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CELLOSIZE™ QP-52000H

  CELLOSIZE™ QP-52000H has a high molecular weight water-soluble thickener. It is a efficient thickener and commonly used in adhesives and cleaning products.

  CELLOSIZE™ QP-52000H is due to its high molecular weight a very efficient thickener. CELLOSIZE™ hydroxylethyl cellulose polymer, nonionic and water-soluble. It is widely used as thickener, binder, emulsifier and film former. It holds moisture, suspends solids and has a good chemical compatibility. Key applications for CELLOSIZE™ include household cleaners, agriculture sprays, oil drilling or fracturing fluids, paper and inks, adhesives and textile back coatings. Viscosity: 2,400 - 3,000 cP Volatiles: 5 wt% Max Water insolubles: 1.00 wt% Max Particle size (through #20 mesh): 98% Min Water-soluble Nonionic Protective colloid Effective film former Good chemical compatibility

  Manufacturer: Dow | Product Line: Cellosize™ Hydroxyethyl Cellulose | Package Sizes: 25kg Bag, 55.115lb Bag

• 

  CP 310W

  A water dispersed chlorinated polyolefin adhesion promoter with 30% solids by weight

  A water dispersed chlorinated polyolefin with ammonia as a neutralizing amine and 24% CPO by weight content. Useful as a primer in adhesion promoters that are air dried prior to applying a topcoat. Solids: 30 wt % CPO: 24 wt % pH @25°C: 9-10 Amine: Ammonia Shelf, 1 yr: No change @50°C, 4wk: Slight settle Freeze thaw: Good Wt/Vol: 1012 g/L (8.4 lb/gal) Viscocity, Brookfield: 10 cP Chlorination: 18-23 % Water: 69 wt % color, Gardner: Beige Specific Gravity @25°C/25°C: 1.008 Used in primer for PP and TPO Compatible with most Polyurethane and acrylics dispersions resins Co-solvents can be added to improve wetting of the substrate Adhesion promoter in paints Coatings in automotive plastics Automotive OEM Coatings for plastic parts

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 15kg Pail, 210kg Drum

• 

  CP 347W

  A water dispersed chlorinated polyolefin with 25% solids by weight.

  A water dispersed chlorinated polyolefin containing 2-amino-2-methyl-1-propanol as a neutralizing amine and 20% CPO by weight content. Compatible with other waterborne resins making it more useful as an additive. also Compatible with many amine-neutralizable solution resins. Solids: 25 wt % CPO: 20 wt % pH @25°C: 9-10 Shelf, 1 yr: No change @50°C, 4wk: No change Freeze thaw: Good Wt/vol: 1010-1030 g/L (8.4-8.6 lb/gal) Viscosity, Brookfield: 10cP Chlorination: 18-23% Water: 74 wt % Color, Gardner: Tan Specific gravity @25°C: 1.020 Used in primer for PP and TPO Used as a stir-in additive in waterborne coatings to improve adhesion to PP and TPO Compatible with most Polyurethane and acrylics dispersions resins Co-solvents can be added to improve wetting of the substrate Adhesion promoter for paints Automotive OEM Coatings Coatings for automotive plastics Coatings for plastics parts Graphic arts General industrial coatings

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 15kg Pail, 210kg Drum

• 

  CP 349W

  A water dispersed chlorinated polyolefin with 26% solids by weight.

  A water disperion of a chlorinated polyolefin containing 2-amino-2-methyl-1-propanol as a neutralizing amine with 5% ethylene glycol. Compatible with other waterborne resins making it useful as an additive. Solids: 26 wt % CPO: 20 wt % pH @25°C: 9-10 Wt/vol: 1010-1040 g/L (8.4-8.7 lb/gal) Viscosity, Brookfield: 10cP Chlorination: 18-23% Water: 69 wt % Organic solvents: 5 wt % Color, Gardner: Tan Specific gravity @25°C: 1.020 Features and Benefits similar to CP 347W Adhesion promoter for paints Automotive OEM Coatings Coatings for automotive plastics Coatings for plastics parts Graphic arts General industrial coatings

  Manufacturer: Eastman | Product Line: Eastman Polyolefin Adhesion Promoters | Package Sizes: 15kg Pail, 210kg Drum

• 

  Larostat® 264 A

  Cationic antistat - >= 25.0 - < 50.0% alkyl dimethylethyl ammonium ethosulfate quat.

  One of the most widely used cationic antistats in the world is LAROSTAT® 264 A, an alkyl dimethylethyl ammonium ethosulfate quat. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. LAROSTAT® 264 A is usually the antistat of choice for general applications where temperature or FDA requirements are not an issue. It is used for both internal and topical applications. Appearance @ 25°C Clear Amber Liquid Color, Gardner:12 max. Solids, % @ 105°C, 1.5 Hrs: 34.0 – 36.0 pH, 30 % Aqueous: 5.0 – 6.5 Viscosity @ 50°C, cSt: 230 – 330 Compatible with complex chemical systems including many anionic systems. A non-halogen quat, it is more effective than other traditional antistats and does not present the problems typical of chloride quats. It is used for both internal and topical applications. Polyurethane, Polystyrene, Rigid PVC, Fiberglass, Textiles, Dust control, Floor finishes, General purpose

  Manufacturer: BASF | Product Line: Larostat® Quaternary Ammonium Antistats | Package Sizes: 1lb Bulk, 449.7384lb Drum

• 

  METHOCEL™ A15C

  Methocel™ A15C is a methylcellulose thickener. It performs many functions simultaneously including thickening, binding, water retention and film forming. The A15C grade has a viscosity range from 1,200 to 1,800 cP.

  Methocel™ A15C is a water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier and functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Sodium Chloride: max 1.5% Viscosity, 2% in water, @20°C, calculated: 1200 - 1800 cP Forms a firm gel texture Reversible hot water gelation

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ A15LV

  Methocel™ A15LV is a low viscosity methylcellulose. With a viscosity from 12 to 18 cP, it is one of the lowest in the Methocel product range. It functions as a rheology modifier in coatings and adhesives.

  Methocel™ A15LV is a low viscosity water-soluble polymer derived from cellulose. Methocel is a high purity, non-ionic cellulose ether, and performs as a rheology modifier. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, while various properties are simultaneously present and interact in combination. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 15kg Bag, 22.68kg Bag, 50lb Bag

• 

  METHOCEL™ A15LV Premium

  METHOCEL™ A15LV Premium has the same performance properties as METHOCEL™ A15LV, except this premium product has less impurities. It can be used in pharmaceutical applications.

  METHOCEL™ A15LV Premium is a water-soluble polymer derived from cellulose with a very low viscosity. Methocel is a high purity, non-ionic cellulose ether. Besides thickening, binding, Methocel functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. The use of Methocel contributes to economic advantages, due to the fact that various properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5.0% Max Residue on ignition: 1.5% Max Ash sulphated: 1.5% Max Sodium Chloride: Max 2.0% Viscosity, 2% in water, @20degC, calculated: 12 - 18 cP Pharmaceutical grade USP/EP/JP compliant Water soluble Non-ionic Forms a firm gel texture Thermally gel in solution Reversible hot water gelation

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 25kg Drum, 50lb Bag

• 

  METHOCEL™ A4C

  METHOCEL™ A4C is a low viscosity methylcellulose thickener. It yields a viscosity of 400 cP at low addition levels.

  Methocel™ A4C is a water-soluble, high purity, non-ionic cellulose ether, and performs as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.50% Sodium Chloride: max 2.0% Viscosity, 2% in water, @20°C, calculated: 350 - 550 cP Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ A4C Premium

  METHOCEL™ A4C Premium has the same performance as METHOCEL™ A4C, except this premium product is pharmaceutical compliant.

  Methocel™ A4C Premium is a water-soluble, high purity, non-ionic cellulose ether. It has a low viscosity range of 320 to 480 cps. Methocel is used as thickener, binder and film former. Further it functions as a suspending aid, stabilizer, surfactants, lubricants, protective colloids, and emulsifiers. Methocel contributes to economic advantages due to the fact that properties are simultaneously present. Methoxyl: 27.5 - 31.5% Loss on drying: 5% Max Residue on ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Viscosity, 2% in water, @20degC, calculated: 320 - 480 cP Pharmaceutical grade Yields optimum performance at a lower concentration Can be added directly to aqueous systems Non-ionic pH stable Thermal gelation which is reversible USP/EP/JP compliant

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ A4M

  METHOCEL™ A4M is a methylcellulose and yields a viscosity of 4,000 cP. It is used as thickener, binder, film former, and water-retention agent.

  METHOCEL™ A4M is a water-soluble methylcellulose. Methocel products also function as suspension aids, surfactants, lubricant, protective colloids, and emulsifiers. Many useful properties are simultaneously present resulting in a significant economic advantage. Methoxyl: 27.5 - 31.5% Sodium Chloride: Max 1.5% Viscosity, 2% in water, @20degC, calculated: 3,500 - 5,600 cP Yields optimum performance at a lower concentration Water soluble No ionic charge pH stable Thermal gelation which is reversible

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 20kg Bag, 50lb Bag

• 

  METHOCEL™ E15 Industrial LV

  METHOCEL™ E15 Industrial LV is an HPMC with a low viscosity of 15 cP. Solutions of this grade can be made at 10% to 15% concentration.

  METHOCEL™ E15LV is water-soluble and non-ionic cellulose ether. It is often used as a thickener or binder. Methocel has various other functions which are often simultaneously present in the formulation resulting in economical advantages. It can perform as suspending aid, stabilizers, surfactants, lubricants, protective colloids, and emulsifiers. Methoxyl: 28 - 30% Viscosity, 2% in Water, @ 20degC: 12 - 18 cP Hydroxypropoxyl: 7.0 - 12.0% Forms a semi firm gel texture Thermally gel in solution Reversible hot water gelation

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag, 50lb Bag

• 

  METHOCEL™ E5 Premium LV

  METHOCEL™ E5 Premium LV is a Hydroxypropyl Methylcellulose (HPMC) thickener which yields a very low viscosity of 5 cP. It is a pharmaceutical grade.

  METHOCEL™ E5 Premium LV is a water-soluble polymer derived from cellulose. This pharmaceutical grade can be used in Industrial applications. Methocel products are used as thickeners, binders, water retention aids, and also function as suspension aids, surfactants, lubricity aids, and emulsifiers. Since various properties are present in a formulation Methocel is an economical preferred choice versus other polymers. Viscosity, 2% in water @20°C: 4.0 - 6.0 cP Methoxyl: 28.0 - 30.0% Hydroxypropoxyl: 7.0 - 12.0% Loss on Drying: 5.0% Max Residue on Ignition: 1.5% Max pH, 2% in water: 5.0 - 8.0 Compliant with US, JP, EUR Pharmacopeia U.S. FDA Gras This grade can be used in Industrial applications.

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 110.23lb Drum, 25kg Drum

• 

  METHOCEL™ J12MS

  METHOCEL™ J12MS is a surface treated HPMC resulting in delayed viscosity build up to 12,000 cPs. It has one of the highest substitution levels.

  METHOCEL™ J12MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydropropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 10,000 - 16,500 cPs

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 55.1lb Bag

• 

  METHOCEL™ J75MS

  METHOCEL™ J75MS is a Hydroxypropyl Methylcellulose (HPMC) thickener with very high substitution. Is has a viscosity range from 60,000 to 75,000 cPs at low addition levels. This grade is surface treated with a slow viscosity build up.

  METHOCEL™ J75MS is a hydroxypropyl methylcellulose (HPMC). It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products function as thickener, binder and rheology modifier. The combination of properties present simultaneously brings economic advantages versus other polymers. Methoxyl: 16.5 - 20.0% Hydroxypropoxyl: 23.0 - 32.0% Viscosity, 2% in water @20°C: 60,000 - 90,000 cP Can be added directly to aqueous systems No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 55.1lb Bag

• 

  METHOCEL™ K100LV

  METHOCEL™ K100LV is a hydroxypropyl methylcellulose (HPMC) thickener with low substitution. It has a low viscosity of 100 cP at low addition levels.

  METHOCEL™ K100LV is a low viscosity methylcellulose polymer. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 80 - 120 cP Moisture, as packaged: 3.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ K15M

  METHOCEL™ K15M is a HPMC thickener with low substitution. It yields a viscosity of 15,000 cP and forms a soft gel texture. This Methocel has the highest gelation temperature of 70°C-90°C (158°F-194°F).

  METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  METHOCEL™ K15M Food Grade

  METHOCEL™ K15M Food Grade is the same as K15M, but is compliant with international Food standards.

  METHOCEL™ K15M Food grade is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 11,250 - 21,000 cPs Food compliancy; FCC, EC, FAO/WHO, GRAS, U.S. FDA Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling Can be used in Industrial applications.

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 20kg Bag, 50lb Bag

• 

  METHOCEL™ K15MS

  METHOCEL™ K15MS is similar to K15M, except it is surface treated for a retarded dissolution.

  METHOCEL™ K15M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 10,000 - 18,000 cP Delayed dissolution Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 44.092lb Bag

• 

  METHOCEL™ K4M

  METHOCEL™ K4M ia a hydroxypropyl ethylcellulose (HPMC) thickener with a low substitution. It has a viscosity of 4,000 cP at low addition levels.

  METHOCEL™ K4M is a hydroxypropyl methylcellulose. It is a water-soluble, high-purity, non-ionic cellulose ether. Methocel products are used as thickeners, binders, film formers, and water retention agents. The combination of properties in a formulation bring economic advantages versus other polymers. Methoxyl: 19.0 - 24.0% Hydroxypropoxyl: 7.0 - 12.0% Viscosity, 2% in water @20°C: 12,000 - 21,000 cP Sodium Chloride: 2.0 Max Water soluble No ionic charge pH stable Thermal gelation Gels goes back into solution upon cooling

  Manufacturer: DuPont | Product Line: Methocel™ Water-Soluble Cellulose Ethers | Package Sizes: 50lb Bag

• 

  Methyl Acrylate

  Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 429.9009lb Drum

• 

  POLYOX™ WSR 1105

  POLYOX™ WSR 1105 is a polyethylene oxide thickener. It is a water-soluble resin with a viscosity of 8,800 to 17,600 cP.

  POLYOX™ WSR 1105 has a molecular weight of 900,000 and has the highest viscosity in the POLYOX range. It is widely used as binder, lubricant, thickener and water retention aid. It forms flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 8800- 17600 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.5kg Drum

• 

  POLYOX™ WSR 205

  POLYOX™ WSR 205 is a water-soluble thickener with a molecular weight 600,000. The viscosity ranges from 4,500 to 8,800 cP.

  POLYOX™ WSR 205 is a polyethylene oxide with a viscosity of 4500 - 8800 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 6800 - 8800 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 301

  POLYOX™ WSR 301 is a water-soluble resin with a high molecular weight of 4,000,000.

  POLYOX™ WSR 301 is a polyethylene oxide (PEO) with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Further it provides wet tack in paper products. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper, adhesives, building and construction. In Concrete, It works as a flow aid in pumped, lightweight, spray and underwater concrete. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% High binding efficiency Crosslinkable Viscoelastic Flow and pumpability aid Lubrication aid Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 301 Fine Powder NF

  POLYOX™ WSR 301 Fine Powder NF has same characteristic as POLYOX™ WSR 301, except this grade is pharma compliant.

  POLYOX™ WSR 301 is a polyethylene oxide with a viscosity of 1650 - 5500 cP. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 1650 - 5500 cP pH at 25degC: 8.0 - 10.0 Loss on drying: 0.0 - 1.0 WT% Silicon dioxide: 0.8 - 3.0 WT% National Formulary Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box

• 

  POLYOX™ WSR 303

  POLYOX™ WSR 303 has a molecular weight 7,000,000 and the viscosity ranges from 7,500 to 10,000 cP.

  POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 7500 - 10000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum

• 

  POLYOX™ WSR 308

  POLYOX™ WSR 308 is a polyethylene oxide thickener. It has a high molecular weight of 8,000,000 and a viscosity range of 10,000 to 15,000.

  POLYOX™ is a water-soluble resin and used as binder, lubricant, thickener and water retention aid in various applications. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. POLYOX™ WSR 308 has the highest molecular weight of the POLYOX range. Viscosity: 10000 - 15000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic Available in 140 lb and 960 lb drums

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum, 63.503kg Drum, 960lb Bag

• 

  POLYOX™ WSR N10

  POLYOX™ WSR N10 is a polyethylene oxide and water soluble thickener. It has a molecular weight of 100,000 and yields a viscosity of 12 to 50 at moderate addition levels.

  POLYOX™ are water-soluble resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 has the lowest molecular weight of the POLYOX™ range and used where lower viscosity is required. It is a recommended grade for seed coatings. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N10 100 Mesh

  POLYOX™ WSR N10 100 Mesh has the same properties than POLYOX™ WSR N10 100, except this has finer particles.

  POLYOX are water-soluble polyethylene oxide resins with a high molecular weight. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N10 mesh has the lowest molecular weight of the POLYOX range and used where lower viscosity is required. This mesh grade has a smaller particle size. Viscosity: 30 - 50 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N12K

  POLYOX™ WSR N12K is a water-soluble polymer and has a molecular weight of 1,000,000. It yields a viscosity of 400 to 800 cP at 2% addition level.

  POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N12K has a relative low viscosity of 400-800 cP. Viscosity: 400 - 800 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N3000

  POLYOX™ WSR N3000 is a water-soluble resin with a relative high molecular weight of 400,000. It yields a viscosity of 2,250 to 4,500 at moderate addition levels.

  POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N3000 LS

  POLYOX™ WSR N3000 LS has the same characteristics as POLYOX™ WSR N3000, except LS version has a low silicon dioxide level of less than 1.5WT%.

  POLYOX™ WSR N3000 is typically used in fluorescent lamp phosphors or as phosphor binders in cathode ray tubes. POLYOX™ is a polyethylene oxide thickener and water-soluble. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2,250 - 4,500 cP Silicon dioxide: 0.0 - 1.5 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 63.503kg Drum

• 

  POLYOX™ WSR N60K

  POLYOX™ WSR N60K is a PEO polymer with a molecular weight of 2,000,000.

  POLYOX™ WSR 60K is a polyethylene oxide with a viscosity of 2000 - 4000 cP in a 2% aqueous solution. It is widely used as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Most common applications are ceramics, industrial cleaning products, electronics, mining, paper and adhesives. Viscosity: 2000 - 4000 cP Silicon dioxide: 0.8 - 3.0 WT% Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 140lb Drum

• 

  POLYOX™ WSR N750

  POLYOX™ WSR N750 is a water-soluble thickener with a molecular weight of 300,000. It has a viscosity range of 600 to 1,200 in a 5% solution.

  POLYOX™ WSR N750 is widely used as seed coatings, wet-tack in paper adhesives, thickener in industrial cleaning products and coatings and paint removers for building and construction. In fluorescent lamp phosphors the N750 is used as binder. POLYOX™ is a polyethylene oxide thickener and water-soluble. Is functions as binder, lubricant, thickener and water retention aid. They form flexible, and tough film which are resistant to oils and greases. The viscoelastic properties enable reduction of spattering and misting. Due to its thermoplasticity PEOs can be extruded, injection molded or casted. Viscosity: 600 - 1,200 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  POLYOX™ WSR N80

  POLYOX™ WSR N80 is a water-soluble PEO thickener with a molecular weight of 200,000. It has a low viscosity of 65 to 115 cP.

  POLYOX™ are water-soluble polyethylene oxide resins with a high molecular weights. They provide lubricity, binding, water retention, thickening and film forming properties. Main applications are in agriculture, adhesives, paper & pulp, industrial cleaners, ceramics and electronics. POLYOX™ WSR N80 is one of the lower molecular weight grades of the POLYOX™ range. Viscosity: 65 - 115 cP Silicon dioxide: 0.8 - 3.0 WT% Particle size thru 10 mesh: 100 Min Particle size thru 20 mesh: 96-100 Water-soluble High binding efficiency Crosslinkable Viscoelastic Thermoplastic Low toxicity Nonionic

  Manufacturer: DuPont | Product Line: Polyox Water-Soluble Resins | Package Sizes: 10lb Box, 140lb Drum

• 

  Solus™ 2100

  Solus™ 2100 is a performance additive for alkyd systems. It improves dry time and hardness development while maintaining the chemical resistance in coatings.

  Solus™ 2100 is a performance additive designed for high-solids solvent-borne systems. Solus™ enables formulators to develop VOC-compliant coatings while reaching high performance. It provides faster dry time and reduces contamination on the coating's surface resulting in more efficiency. It has benefits in 2K-PU, UV resins, and acrylic lacquers. Faster dry-to-touch time Excellent anti-sag behavior Wider window of polishability Improved gloss after polishing Ease of sanding

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  Solus™ 2300

  Solus™ 2300 is similar to Solus™ 2100 except it has a higher glass transition temperature.

  Solus™ 2300 is a performance additive designed for high-solids solvent-borne systems. Solus™ enables formulators to develop VOC-compliant coatings while reaching high performance. It provides faster dry time and reduces contamination on the coating's surface resulting in more efficiency. It has benefits in 2K-PU, UV resins, and acrylic lacquers. Faster dry-to-touch time Excellent anti-sag behavior Wider window of polishability Improved gloss after polishing Ease of sanding

  Manufacturer: Eastman | Product Line: Eastman Cellulose Esters | Package Sizes: 20kg Bag

• 

  Trilene® 65

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.

  Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case

• 

  Trilene® 67

  Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 9.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 67 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 67 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 67 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 46/54 Degree of Unsaturation (% Diene): 9.5% Type of Diene: ENB Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 39,000 Brookfield Viscosity (cP, RVT #7 at 60°: 900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 128,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 300lb Drum, 44lb Case, 50lb Carton

• 

  Trilene® 77

  Low molecular weight Ethylene Propylene (EPDM) terpolymer with 10.5% diene content for use in rubber, coatings and adhesives.

  Trilene® 77 is a crystalline waxy EPDM terpolymer that is used as an additive in rubber compounds and works well in sulfur-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 77 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 77 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Trilene® 77 is easier to handle during mixing compared to Trilene® 65 and 67 since it is a solid at room temperature. Ethylene/Propylene: 74/26 Degree of Unsaturation (% Diene): 10.5% Type of Diene: ENB Color: Pale Yellow, Waxy solid Specific Gravity: 0.86 Molecular Weight by GPC (Da): 27,000 Brookfield Viscosity (cP, RVT #7 at 60°: 800,000 Brookfield Viscosity (cP, RVT #7 at 100°: 102,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process East to weigh before mixing Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anti-corrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives

  Manufacturer: Lion Elastomer | Product Line: Trilene® Epdm Elastomers | Package Sizes: 50lb Carton

• 

  Tyzor® 212, zirconium chelate

  A water stable zirconium chelate with ca. 52% active ingredient in 1-propanol solution.

  Tyzor 212 is a clear, slightly viscous yellow liquid with 52% active ingredient which is stable in water for extended periods. It reacts with water by hydrolysis to form a reactive hydroxy zirconium chelate which can form bonds with organic -OH and -COOH groups of many polymeric carbohydrates such as cellulose, guar derivatives and starch. Strong gels can be formed by crosslinking. Tyzor 212 can also act as an adhesion promoter to -OH functional surfaces. Zr Content: 12% Active Content: 52% Color: Yellow Solvent: n-propanol Specific Gravity (25C): 1.06 Freezing Point: <-25C Boiling Point: 97C (Solvent) Flash Point: 22C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Miscible In oil well fracturing fluids, Tyzor 212 can be used in pH 8.5-11 fluids and acts as a delayed crosslinking agent that initiates above 49C (120F). It's an effective crosslinker for dispersions of guar and it's derivatives to form high viscosity aqueous gels. For coatings, inks and paints applications, see increased film strength, adhesion promotion and rheology control. Due to it's great water compatibility and low color generation, Tyzor 212 also functions well over a wide range of pH.

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 400lb Drum

• 

  Tyzor® 217, zirconium lactate

  A water based zirconium chelate with pH around 7 stable in water.

  Suitable for crosslinking carbohydrates such as cellulose, starch, guar and other functionalized polymers like polyvinyl alcohol. Tyzor 217 also functions as a surface modifier and adhesion promoter on paper, glass, metal, pigments and other materials with oxidized surfaces. Zr Content: 5.4% Color: Pale Yellow Solvent: Water Specific Gravity (25C): 1.2 g/mL Freezing Point: 0C Boiling Point: 100C Flash Point: None Solubility in Water: Fully Miscible No Voc Content Low toxicity Cross-linking agent for dispersions of guar to form high viscosity aqueous gels used in oil well fracturing applications Cross links pigements and binders in waterborne paints and printing inks Adhesion promoter in metal, glass, fillers and pigments to increase compatibility and modify physical properties Modifies surface of paper and sysnthetic nonwovens to increase hardness and decrease hydrophilicity

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 529.1lb Drum

• 

  Tyzor® 9000

  Tyzor™ 9000 is a colorless to yellowish reactive organic alkoxy titanate liquid with a 100% active content.

  Tyzor 9000 improved crosslinking of polymers, adhesion promotion and the formation of polymeric titanium dioxide layers as binders or coatings. It can also act as a Lewis acid catalyst in applications such as condensation, esterification, transesterification and addition reactions. TiO2 Content: 23.9% Active Content: 100% Molecular Weight: 340 g/mol Color: Yellow Specific Gravity (25C): 0.9 Viscosity (25C): 140 mPa*s Pour Point: -40C Boiling Point: >100C (Decomposes) Flash Point: 60C Refractive Index: 1.444 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Quickly In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, corrosion resistance and adhesion in coating applications In Crosslinking Crosslinks with polymers or binders containing -OH and -COOH functional groups. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 55.1lb Pail

• 

  Tyzor® AA, titanium acetylacetonates

  A liquid titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water for short periods of time.

  Tyzor AA is typically used for adhesion promotion, but also frequently used for crosslinking in non-aqueous systems, catalysis and surface modification. They are soluble and or miscible in organic solvents or products like ethanol, isopropanol, butanol, ethyl acetate, IPA, methyl ethyl ketone and acetone. TiO2 %: 16.5 Active Content %: 75 Form: Liquid Color: Yellow to Red Solvent: 25% IPA Specific Gravity: 0.99 Viscosity, mPa: 10 Pour Point C(F): 0(32) Boiling Point C(F) Solvent: 82(179.6) Flash Point C(F): 12(53.6) Solubility: Miscible in most organic solvents. Decomposes in water Improved drying, solvent resistance, heat resistance adhesion to substrates such as aluminum and polyolefin foils in printing applications. Elimination of by products, high yield and easy work up in esterification and transesterification under mild conditions. Improved surface hardness, dispersibility, coloring effects, corrosion protection and heat and light reflection in coating applications. When combined with metal alkoxides, produce metal oxide systems for use as binders or coatings

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 35lb Pail, 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® AA-105

  A titanium chelate with acetylacetonate as the chelating agent with an 100% active content.

  Tyzor AA-105 is similar to Tyzor AA, but has a TiO2 and active content of 23% and 100% respectively with no solvent content. TiO2 %: 23 Active Content %: 100 Form: Liquid Color: Yellow to Red Solvent: None Specific Gravity: 1.12 Viscosity, mPa: 90 Pour Point C(F): -25(-13) Boiling Point C(F) Solvent: n/a Flash Point C(F): 50(122) Solubility: Miscible in most organic solvents. Decomposes in water See benefits from Tyzor AA

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 418.5lb Drum, 55.1lb Pail

• 

  Tyzor® AA-65, titanium acetylacetonates

  A titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water and with a pour point of -70°C.

  Tyzor AA-65 is similar to Tyzor AA, but has a TiO2 and active content of 15% and 65% respectively. It has a solvent content of 28% IPA and 7% EtOH TiO2 %: 15 Active Content %: 65 Form: Liquid Color: Yellow to Red Solvent: 28% IPA/7% EtOH Specific Gravity: 0.98 Viscosity, mPa: 8 Pour Point C(F): -70(-94) Boiling Point C(F) Solvent: 78(172.4)[Ethanol] Flash Point C(F): 14(57.2) Solubility: Miscible in most organic solvents. Decomposes in water See benefits from Tyzor AA

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 418.9lb Drum

• 

  Tyzor® AA-75, titanium acetylacetonates

  A titanium chelate with acetylacetonate as the chelating agent. It is moderately stable in water and with a pour point of -5°C.

  Tyzor AA-75 is similar to Tyzor AA, but with specific gravity of 1.02 and viscosity 11 mPa. TiO2 %: 16.5 Active Content %: 75 Form: Liquid Color: Yellow to Red Solvent: 25% IPA Specific Gravity: 1.02 Viscosity, mPa: 11 Pour Point C(F): -5(23) Boiling Point C(F) Solvent: 82(179.6) Flash Point C(F): 12(53.6) Solubility: Miscible in most organic solvents. Decomposes in water Improved drying, solvent resistance, heat resistance adhesion to substrates such as aluminum and polyolefin foils in printing applications. Elimination of by products, high yield and easy work up in esterification and transesterification under mild conditions. Improved surface hardness, dispersibility, coloring effects, corrosion protection and heat and light reflection in coating applications. When combined with metal alkoxides, produce metal oxide systems for use as binders or coatings.

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® BTP, n-Butyl polytitanate

  A yellowish polymeric butyl titanate with a 100 % active content.

  Tyzor BTP is an organic liquid sensitive to moisture and has a very high TiO2 content with a low VOC amount in comparison to other titanates and zirconates TiO2 Content: 34.5 % Active Content: 100 % Color: Yellow Density (25C): 1.12g/cm3 Viscosity (25C): 2,000-6,000 mPa*s Pour Point: -39C Boiling Point: 246C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Solubility in Solvents: Miscible in most organic solvents In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives BTP can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder itself or promote adhesion. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes Binder Tyzor BTP can act as an inorganic binder by itself or combined with metal oxides in mineral filled systems to provide high temperature resistance.

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® EHTAA

  Tyzor EHTAA is a titanium chelate with acetylacetonate as a chelating agent and 66% active content in 2-ethylhexanol.

  EHTAA is a clear amber to orange slightly viscous liquid soluble in water for a short period of time. It can improve adhesion promotion, crosslinking of functional polymers or used to form polymeric titanium dioxide layers as a binder or coating. It can also act as a Lewis acid catalyst in Transesterification, esterification, condensation and addition reactions. They can also be used as additives in paint to crosslink functional polymers to binders, promote adhesion or bind to itself TiO2: 10.6% Ti Content: 6.3% Active Content: 66% Color: Yellow to Amber Solvent: 2-Ethylhexanol Specific Gravity (25C): 0.94 g/mL Boiling Point: 185C (Solvent) Flash Point: 54C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Partly Miscible In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, corrosion resistance and adhesion in coating applications In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Printing inks See improved drying rates, increased solvent resistance, heat resistance, adhesion and crosslinking to various substrates in solvent based printing inks

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 418.87lb Drum

• 

  Tyzor® ET, ethyl titanate

  A pale yellow tetra ethyl titanate liquid with 100 % active content sensitive to moisture.

  Tyzor ET is a solvent free titanate with a small amount of isopropoxy groups to keep the product liquid. It has the highest titanium content of all the tyzor products. Tyzor ET can be used in esterification, transesterification, condensation and addition processes as a Lewis acid catalyst. It is also an effective adhesion promoter, crosslinking agent and can also form polymeric titanium dioxide layers used as a binder or coating. TiO2 Content: 34 % Active Content: 100 % Color: Light Yellow Density (20C): 1.09 g/mL Viscosity (20C): 70 mPa*s Pour Point: -40C Boiling Point: 153C Flash Point: 40C Refractive index: 1.51 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Solubility in Solvents: Miscible in most organic solvents Similar to features and benefits of Tyzor BTP

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 441lb Drum, 55.1lb Pail

• 

  Tyzor® GBA, titanium acetylacetonates

  A titanium chelate with acetylacetonate as the chelating agent with a 16.4% TiO2 content.

  Tyzor GBA can be applied as a coating primer, additive or in sol-gel systems as a base material. It can also act as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 %: 16.4 Active Content %: 75 Color: Orange to Red Solvent: Isopropanol, Butanol, Methanol Specific Gravity: 1.02 Viscosity, cps: 60 Pour Point C: -42 Boiling Point C: 70 Flash Point C: 12 Solubility in solvents: Miscible in most organic solvents Solubility: Decompose Excellent crosslinker and adhesion promoter in solvent based inks. Additional benefits in inks include improved dry rates, adhesion, solvent and heat resistance. In coating applications, glass, metals, fillers and pigments can be treated with Tyzor GBA to give increased adhesion promotion, surface hardness, scratch resistance, heat and light reflection and corrosion resistance. Act as additives to aid in crosslinking -OH and -COOH functional polymers or binders. Tyzor GBA also eliminate by products, increase yield, easy work-up and low catalyst concentration in esterification and transesterification of various esters and polyesters. These benefits also extend to addition reactions for polyurethanes

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® GBO, titanium acetylacetonates

  A titanium chelate with acetylacetonate as the chelating agent with a 12.7% TiO2 content.

  Similar to Tyzor GBA TiO2 %: 12.7 Active Content %: 60 Color: Orange to Red Solvent: Isopropanol, Butanol, Methanol Specific Gravity: 0.95 Viscosity, cps: <10 Pour Point C: <-42 Boiling Point C: 70 Flash Point C: 12 Solubility in solvents: Miscible in most organic solvents Solubility: Decompose Similar to Tyzor GBA

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates

• 

  Tyzor® LA, titanium chelate

  A stable water based titanium chelate excellent for use in aqueous systems. Tyzor LA is stable at pH around 7-8.

  Tyzor LA can be used as a catalyst in transesterification, esterification and condensation applications. It can also be used as a cross linking agent for OH functional polymers, adhesion promoter and aid in the formation of polymeric titanium dioxide as a binder or coating. TiO2 Content: ca. 13.6% Active Content: ca. 50% Color: Colorless to light Density (25C): ca. 1.21/ml Viscosity (25C): ca.9 mPa*s pH: ca. 8-9 Pour Point: ca. -10C Boiling Point: ca. 100 (water) C Flash Point: None Solubility in Water: Miscible

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.529lb Drum, 55.1lb Pail

• 

  Tyzor® NBZ, zirconium tetra-n-butanolate

  Tyzor NBZ is a yellowish, highly reactive organic alkoxy zirconate with 87% active content in n-butanol.

  Tyzor NBZ is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity ZrO2 Content: 28 % Active Content: 87 % Color: Yellow Molecular Weight: 383 g/mol Density (20C): 1.07 g/mL Viscosity (20C): 100 mPa*s Pour Point: -70 C Boiling Point (@10 mmHg): 117 C (Solvent) Flash Point: 35 Refractive Index: 1.51 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions to result in products like acrylic esters, polyesters and plasticizers. Benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives NBZ can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder or promote adhesion. In Pigments and Films Can be used to Micro or nano scale ZrO2 pigments used to create polymeric ZrO2 films on surfaces via pyrolytic or hydrolytic processes

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 55.1lb Pail

• 

  Tyzor® NPT, titanium tetrapropanolate

  A highly reactive clear colorless liquid organic alkoxy titanate with 100% active content

  Similar to Tyzor BTP TiO2 Content: 28.1 % Active Content: 100 % Color: Colorless to Yellow Molecular Weight: 284 g/mol Density (20C): 1.05 g/ml Viscosity (20C): 190 mPa*s Pour Point: -50C Boiling Point: 170C Refractive Index: 1.5 Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Similar to Tyzor BTP. It can also be used in Zieglar-Natta catalysts for olefin polymerization.

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 441lb Drum, 55.1lb Pail

• 

  Tyzor® NPZ, ziconium tetra-n-propanolate

  A yellowish to tan, highly reactive organic alkoxy zirconate with 74 % active content in n-propanol.

  Tyzor NPZ is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity TiO2 Content: 28 % Active Content: 74 % Color: Yellow to tan Molecular Weight: 324 g/mol Density (20C): 1.07g/mL Viscosity (20C): 80 mPa*s Pour Point: -70 C Boiling Point (@10 mmHg): 97 C (Solvent) Flash Point: 23 Refractive Index: 1.445 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions to result in products like acrylic esters, polyesters and plasticizers. Benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity Oil & Gas fracturing Effective crosslinker for dispersion of guar and it's derivatives to form high viscosity aqueous gels used in fracturing applications. In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives NPZ can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder or promote adhesion. In Pigments and Films Can be used to Micro or nano scale ZrO2 pigments used to create polymeric ZrO2 films on surfaces via pyrolytic or hydrolytic processes

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 39.68lb Pail, 440.9lb Drum

• 

  Tyzor® OGT, octyleneglycol titanate

  A reactive organic alkoxy titanate with 100% active content less sensitive to moisture than Tyzor TPT and TnBT

  Similar to Tyzor BTP TiO2 Content: 12.7% Active Content: 100 % Color: Colorless to Yellow Density (20C): 1.03 g/mL Viscosity (20C): 3500 mPa*s Pour Point: -55C Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Similar to Tyzor BTP It can also act as a binder itself, used as an additive in sealants to crosslink -OH or -COOH functional polymers, binders or promote adhesion.

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® TEAZ, zirconium chelate

  A yellow to brown ethanolamine zirconium complex with 100% active content.

  Tyzor TEAZ forms a reactive hydroxy zirconium chelate via hydrolysis with water which is stable in water for extended periods of time. The hydrated chelate can from complexes with organic -OH and -COOH groups. Strong gels may be formed by crosslinking with multifunctional polymers such as cellulose, starch and guar derivatives. They can also act as adhesion promoters to oxidized surfaces. Tyzor Teaz is also useful as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 Content: 17.9 % Active Content: 100 % Color: Yellow to Brown Density (20C): 1.34g/mL Viscosity (20C): 50,000 mPa*s Flash Point: >100 C Refractive Index: 1.53 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Miscible In Reaction catalysts Effective in reactions such as esterification, transesterification, condensation and addition reactions. Primarily suited for direct esterification processes due to it's great compatibility with water byproducts. Benefits include moderate reaction rates, increased yield, easy work up, low catalyst concentration and low toxicity Oil & Gas fracturing Effective crosslinker for dispersion of guar and it's derivatives to form high viscosity aqueous gels used in fracturing applications. In Thixotropic paints Crosslinking agent in carbohydrate coated latex particles for high viscous thixotropic paints Water borne Paints Crosslinks binders in water borne paints

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum

• 

  Tyzor® TnBT, tetra-n-butyl titanate

  A Lewis acid catalyst and highly reactive organic alkoxy titanate with 100% active content.

  Excellent as cross-linking agent or effective adhesion promoter to polymers. Also forms polymeric titanium dioxide layers used as a binder or coating. Tyzor TnBT can be used as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. TiO2 Content: 23.5 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 340 g/mol Density (20C): 0.99g/mL Freezing Point: -70C Boiling Point (@10 mmHg): 183C Flash Point: 47C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives TnBT can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder itself or promote adhesion. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum, 55.1lb Pail

• 

  Tyzor® TOT, tetra-2-ethylhexyl titanate

  A clear to yellowish reactive organic alkoxy titanate with 100% active content, but less sensitive to moisture than TPT or TnBT

  Similar to Tyzor TnBT TiO2 Content: 14.4 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 564 g/mol Density (20C): 0.92g/mL Viscosity (20C): 140 mPa Boiling Point (@10 mmHg): 249C Flash Point: 60C Refractive Index: 1.482 Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly Similar to Tyzor TnBT

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 1lb Bulk, 418.9lb Drum, 55.1lb Pail

• 

  Tyzor® TPT 20B, tetra-isopropyl titanate

  A highly reactive organic alcoxy mixture of Tyzor TPT and TnBT. A clear to yellowish liquid that is very sensitive to moisture.

  Similar to Tyzor TPT. Very low pour points (< 30C) compared to Tyzor TPT TiO2 Content: 27.1 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 564 g/mol Density (20C): 0.97g/mL Viscosity (20C): 20 Freezing Point: <-30 Boiling Point (@10 mmHg): 220C Flash Point: 42 Refractive Index: 1.482 Solubility in Solvents: Miscible Solubility in Water: Decomposes Similar to Tyzor TPT

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 440.9lb Drum

• 

  Tyzor® TPT, tetra-isopropyl titanate

  A 100% active colorless to yellowish liquid, highly reactive organic alkoxy titanate with a freezing point of 19C

  Excellent as cross-linking agent or effective adhesion promoter to polymers. Also forms polymeric titanium dioxide layers used as a binder or coating. Tyzor TnBT can be used as a Lewis acid catalyst in esterification, transesterification, condensation and addition reactions. If crystallization occurs, the product can be re-dissolved by warming and agitation. TiO2 Content: 28.1 % Active Content: 100 % Color: Colorless to Pale Yellow Molecular Weight: 284 g/mol Density (20C): 0.95g/mL Viscosity (20C): 3.5 mPa*s Freezing Point: 19C Boiling Point (@10 mmHg): 232C Flash Point: 56C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes quickly In Reaction catalysts Tyzor TPT is used as a Lewis acid catalyst for esterification, addition and condensation reactions. They can also be used as Ziegler-Natta catalysts for polymerization. Some benefits include elimination of by products, increased yield, easy work up, low catalyst concentration and low toxicity In Coatings Improved surface hardness, coloring effects, corrosion protection and heat and light reflection, iridescence, corrosion resistance, scratch resistance and adhesion in coating applications In Paint Additives TnBT can be used as an additive to crosslink -OH and -COOH functional polymers, act as a binder itself or promote adhesion. In Pigments and Films Can be used to Micro or nano scale TiO2 pigments used to create polymeric TiO2 films on surfaces via pyrolytic or hydrolytic processes

  Manufacturer: Dorf Ketal | Product Line: Tyzor® Organic Titanates And Zirconates | Package Sizes: 418lb Drum, 55.1lb Pail