There are no products found that meet this criteria.

• 

  Capstone™ LPA

  Partially fluorinated polymer which provides a barrier against oil, water, dirt and stains.

  Capstone™ LPA is a solvent-based, partially fluorinated polymer used as an additive for the protection of leathers and textiles. It provides an invisible barrier to water, oil, dirt, and stains for leather products from footwear, handbags and clothing to furnishings and accessories. Appearance: Clear, slightly yellow liquid Active Solids, %: 35 Solvent, %: 65 Density, g/mL: 0.968 Flash Point (Closed Cup), °C (°F) 28 (82) Boiling Point, °C (°F) ~120 (248) Cold Storage Product gels below 10 °C (50 °F). Product is freeze/thaw stable. Shelf Life: 2 years Excellent water and oil repellency Excellent resistance to oil- and water-based stains Not film-forming Manufactured using Chemours patented LX technology that minimizes residual raw materials and impurities Targeted below level of detection (LOD)* for PFOA Extensively tested by Chemours to ensure it is safe for its intended use Tested by TNO (Netherlands) following augmented OECD Guidelines for the Testing of Chemicals 403 Capstone™ LPA is normally used for spray finishing of leathers and care products formulated in pressurized cans.

  Manufacturer: Chemours | Product Line: Capstone™ Fluorosurfactants | Package Sizes: 88.18lb Drum

• 

  Capstone™ ST-500

  Capstone™ ST-500 is the same chemistry as ST- 300, except has a higher pH of 9-11.

  Capstone™ ST-500 is a VOC-free, anionic aqueous fluorochemical solution that provides a durable, non-film forming, transparent protective barrier against oil and water on porous mineral surfaces. Appearance: Colorless to amber liquid Stability: Stable at normal temperatures. Perishable if frozen pH: 9–11 Active Solids, % 25 Density, g/mL 1.1 Flash Point (Closed Cup), °C (°F) Not flammable Boiling Point, °C (°F) ~100 (~212) Freezing Point, °C (°F) ~0 (~32) Shelf Life: 2 years Spray*: Can be used in consumer spray, including aerosol spray cans Durable protection from staining Superior oil and water repellency Retains the natural appearance of stone, tile, concrete or masonry Allows substrate to breathe (non-film forming) Easy to clean and maintain Preserves the beauty of natural stone and tile Is in compliance with REACH requirements Is listed on TSCA inventory Capstone™ ST-500 is a repellent used in water based penetrating sealers for stone, unglazed tile, grout, terra cotta, concrete, granite, and brick. Capstone™ ST-500 provides oil and water repellency, stain resistance, and easy stain cleanup.

  Manufacturer: Chemours | Product Line: Capstone™ Fluorosurfactants | Package Sizes: 2205lb Tote, 40lb Pail, 440lb Drum

• 

  Elvacite® 2028

  Elvacite® 2028 has a low molecular weight therefore making it broad in solubility and compatibility.

  Elvacite® thermoplastic acrylic resin copolymers or polymers are seen in solvent-applied high-quality coatings. Due to the wide range of attributes, Elvacite® is suitable for numerous applications. Appearance: Solid beads Specific gravity: 1.11 @ 25°C Glass transition temp, onset: 45°C Molecular weight: 59,000 Particle size (D50): 130-220 microns Acid number: 12 Tukon hardness, knoops no: 6 Tensile strength: 800 psi Elongation at break (23°C, 50% R.H.): 75% Inherent viscosity: 0.226-0.257 % Moisture: 0.8 (max) % Methacrylic acid 1.4 - 2.0 Improved pigment dispersion Can be used in brass coatings Soluble in some alcohols Use in no-reactive resins in reactive coatings

  Manufacturer: Dianal | Product Line: Elvacite® Specialty Acrylic Resins | Package Sizes: 275lb Drum, 55lb Bag

• 

  FN Powder

  A fused stearate derived from hydrogenated fatty acids. Used as a catalyst neutralizer in polypropylenes.

  Calcium stearate is a carboxylate which is formed from stearic acid and calcium oxide. Its primary uses are as a flow agent, stabilizer, thicker, and surface conditioner. Total Ash: 9.30 – 11.50 Fineness, % Thru 325 Mesh: 85.00 – 100.00 Free Fatty Acids: 0.00 – 1.00 Water %: 0.00 – 3.50 Appearance: White Powder Catalyst neutralizer Lubrication in polypropylene's Anti-static agent and acid scavenger in PVC Calcium Stearate FN Powder is a wide variety of applications ranging from waterproofing/ water repelling fabric, stops caking in dehydrated vegetables, as well as a stabilizer in PVC production.

  Manufacturer: PMC Biogenix | Product Line: Pmc Metallic Stearates | Package Sizes: 50lb Bag, 50lb Bag, 50lb Bag

• 

  Zelan™ CA-72

  Non-flourinated water repellent.

  Zelan™ CA-72 is a lasting water repellent treatment for leather and a variety of hard surfaces and substrates. It is made with non-fluorinated, plant based material that is renewably sourced and is that can be replenished naturally over time. Ionic Type: Non-ionic/slightly anionic Appearance: Off-white to white, cloudy liquid Chemical Structure Alkyl urethane Active Solids, wt%: 19–21, in water Density, g/mL: 1.002 pH: 8–10 Solubility: Readily dispersible in water between 10–35 ºC (50–95 °F) Shelf Life: 2 years Foam: Can foam with excessive shaking Flash Point (closed cup): Not flammable Boiling Point, °C (°F): ~100 (~212) Freezing Point, °C (°F): ~0 (~32) Non-flourinated Plant based Extreme water and oil repellancy Improves cleanability of stone Blends well with other Capstones™ Can be applied using a brush, mop, roller, or paint pad May be used in industrial, professional, and consumer applications A biocide should be added to formulations made using Zelan™ CA-72 to protect against microbial growth.

  Manufacturer: Chemours | Product Line: Capstone™ Fluorosurfactants | Package Sizes: 400lb Drum, 40lb Pail