Aqueous nonionic ethoxylated fluorinated surfactant that is VOC-free, APEO-free, nonflammable, and stable in acidic, basic, brine, and hard water environments.
Capstone™ FS-34 is all-purpose, water-soluble, ethoxylated, nonionic fluorosurfactant that changes surface energies at very low concentrations. FS-34 is VOC-free, APEO-free, nonflammable, and compatible with additives and resins of any ionic class. Appearance: Light yellow to dark amber liquid pH: 5.5-7.5 g/mL Specific Gravity: 1.10 Stability: Freeze-thaw stable Composition: 25% solids Shelf Life: 5 years VOC-free APEO-free Nonflammable Compatible with additives and resins of any ionic class Stable in acidic, basic, brine, and hard water environments Reduces drag-out from bath applications Provides wetting and leveling Lowers surface tension Reduces surface defects Water-Based Floor Care (Finishes, Waxes, and Polishes), Concentrated Cleaning Solutions, Aqueous-Based Paints and Inks, Stability and Surface Activity in Brine and Aggressive (Acidic and Basic) Media
Similar to FS-61, but contains isopropyl alcohol.
Capstone™ FS-63 is a water-soluble, anionic fluorosurfactant that provides low aqueous surface tensions with minimal foaming. Capstone™ FS-63 offers great wetting, leveling, anti-block, and dirt pick-up resistance. Appearance: Pale yellow to amber liquid pH: 7.5–9.0 Specific Gravity: 1.1 g/mL Stability: Freeze-thaw stable. Mix well before use. Composition: 35% solids, 20% isopropyl alcohol, 45% water Shelf Life: 5 years Flash Point: 26 °C (79 °F) Foam: Can foam with excessive shaking Anti-blocking Oil repellency Dirt pick-up resistance Wetting and enhanced leveling Re-wet characteristics in multi-coat applications Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency Reduced bath drag-out Very Low Foam REACH compliant Listed on TSCA inventory Architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning.
Aqueous anionic fluorinated surfactant that is VOC-free, APEO-free, nonflammable, and provides excellent anti-blocking, oil repellency, and dirt pick-up resistance (DPR) with a minimum of 20% renewably sourced ingredients by weight.
FS-64, a VOC-free, APEO-free, non-flammable anionic fluorosurfactant, combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sourced™ material, which contains a minimum of 20% renewably sourced ingredients by weight. FS-64 is an environmentally preferred fluorosurfactant that provides all the general performance attributes you would expect from a fluorosurfactant, including: superior surface tension reduction, anti-block, oil repellency, dirt pick-up resistance (DPR), excellent leveling characteristics and stability in highly acidic and alkaline media. Appearance: Light yellow to amber, clear liquid pH: 7–9 Specific Gravity: 1.1 g/mL Stability: Freeze-thaw stable. Mix well before use. Composition: 15% solids Shelf Life: 5 years Flash Point: Does not flash Anti-blocking Oil repellency Wetting and enhanced leveling Reduces cratering and provides faster spreading Lowers surface tension to improve cleaning efficiency Compatible with silicone additives REACH compliant Listed on TSCA inventory Architectural coatings, Industrial finishes, Water-Based Floor Care (Finishes, Waxes, and Polishes), Concentrated Cleaning Solutions, Additive to Water-Based Paints and Coatings
Aqueous nonionic fluoropolymer that can be combined with anionic fluorosurfactants to provide optimal performance for dirt pickup resistance (DPR).
APEO-free, non-flammable FS-81 is a self-dispersed, waterborne, partially fluorinated polymeric coating additive designed to improve cleanability of oily dirt and common household stains on flat architectural waterborne coatings and latex paints. Appearance: Off-white to yellow liquid Use Rate: (active ingredient) 0.1–0.2% 0.1–0.3% 0.07–0.1% Density: 1.08 g/mL Flash Point: >200 °F (93 °C) Composition: 33% active ingredient Foam: FS-81 has very low foam and does not cause additional foam in coating systems. Odor: Faint methyl isobutyl ketone odor Solubility: Dispersible directly in latex paint. The product can be diluted with water and has limited solubility in polar solvents. Shelf Life: Three years after production under normal storage conditions Low sheen Improves oil contact angles on interior, flat finish, Easy Clean latex coatings Improved cleanability of oily, dirt-based stains, such as dirty handprints, and other household stains Improved performance with dirt pickup resistance (DPR). Does not interfere with re-coat adhesion and does not affect water repellency Low Foaming Interior and exterior latex paints, oil-based stains, printing inks, architectural paints, waterborne coatings
Partially fluorinated polymer which provides a barrier against oil, water, dirt and stains.
Capstone™ LPA is a solvent-based, partially fluorinated polymer used as an additive for the protection of leathers and textiles. It provides an invisible barrier to water, oil, dirt, and stains for leather products from footwear, handbags and clothing to furnishings and accessories. Appearance: Clear, slightly yellow liquid Active Solids, %: 35 Solvent, %: 65 Density, g/mL: 0.968 Flash Point (Closed Cup), °C (°F) 28 (82) Boiling Point, °C (°F) ~120 (248) Cold Storage Product gels below 10 °C (50 °F). Product is freeze/thaw stable. Shelf Life: 2 years Excellent water and oil repellency Excellent resistance to oil- and water-based stains Not film-forming Manufactured using Chemours patented LX technology that minimizes residual raw materials and impurities Targeted below level of detection (LOD)* for PFOA Extensively tested by Chemours to ensure it is safe for its intended use Tested by TNO (Netherlands) following augmented OECD Guidelines for the Testing of Chemicals 403 Capstone™ LPA is normally used for spray finishing of leathers and care products formulated in pressurized cans.
Capstone™ ST-500 is the same chemistry as ST- 300, except has a higher pH of 9-11.
Capstone™ ST-500 is a VOC-free, anionic aqueous fluorochemical solution that provides a durable, non-film forming, transparent protective barrier against oil and water on porous mineral surfaces. Appearance: Colorless to amber liquid Stability: Stable at normal temperatures. Perishable if frozen pH: 9–11 Active Solids, % 25 Density, g/mL 1.1 Flash Point (Closed Cup), °C (°F) Not flammable Boiling Point, °C (°F) ~100 (~212) Freezing Point, °C (°F) ~0 (~32) Shelf Life: 2 years Spray*: Can be used in consumer spray, including aerosol spray cans Durable protection from staining Superior oil and water repellency Retains the natural appearance of stone, tile, concrete or masonry Allows substrate to breathe (non-film forming) Easy to clean and maintain Preserves the beauty of natural stone and tile Is in compliance with REACH requirements Is listed on TSCA inventory Capstone™ ST-500 is a repellent used in water based penetrating sealers for stone, unglazed tile, grout, terra cotta, concrete, granite, and brick. Capstone™ ST-500 provides oil and water repellency, stain resistance, and easy stain cleanup.
Low molecular weight liquid Ethylene Propylene (EPDM) terpolymer with 10% diene content for use in rubber, coatings and adhesives.
Trilene® 65 is a liquid EPDM terpolymer that is used as an additive in rubber compounds and works well in peroxide-cured systems to reduce viscosity. It acts as a reactive plasticizer in rubber compounds without any significant loss of hardness or other mechanical properties. In coatings & adhesives Trilene® 65 is used as a nonpolar, non crystalline elastomeric material that provides strong adhesion to a variety of substrates. Additionally, Trilene® 65 demonstrates low permeability to gases and water vapor, superior impact resistance and high flexibility at low temperatures. Ethylene/Propylene: 50/50 Degree of Unsaturation (% Diene): 10% Type of Diene: DCPD Color: Pale Yellow Specific Gravity: 0.86 Molecular Weight by GPC (Da): 47,000 Brookfield Viscosity (cP, RVT #7 at 60°: 1,900,000 Brookfield Viscosity (cP, RVT #7 at 100°: 177,000 Volatiles at 100ºC (212ºF): <0.5% Easy to process Non extractable Maintains mechanical properties Non-volatile Hydrophobic with low surface energy Compatible with other polymers, oils and solvents Flexible at low temperatures Excellent resistance to moisture, UV light, ozone and chemical degradation Adhesion to various substrates without the use of a primer Good impact resistance Rubber belts and hoses for Aerospace and Automotive Building & Construction Wire & Cable Weather stripping Conveyer belts Roof coatings Elastomeric coatings Marine coatings Anticorrosion coatings Barrier coatings that need permeability to air, water and chemicals Elastomeric sealants & adhesives