ANDEROL® 456

ISO Grade 32, synthetic diester lubricant for light duty industrial applications & equipment.
Product Overview

ANDEROL® 456 is a specialty lubricant oil formulated from a high quality synthetic diester. It provides excellent wear resistance & surface protection along with a unique composition designed to prevent gumming-up or sticky deposit formation.

ANDEROL® 456 is a suitable lubricating oil for light-to-medium duty industrial equipment with moderate loads. This diester based lube solution is incredibly stable at both low and high temperatures, without loss of performance from -50°F to 350°F.

Product Specifications

Viscosity ISO VG: 32
SAE Viscosity Grade: 20
Viscosity Index: 228
Flash Point: 232°C (450°F)
Pour Point: -59°C (-74°F)
Specific Gravity (@60°F): 0.94
Density (lb/gal): 7.83


Primary Chemistry: Diester
Features & Benefits
Excellent oxidative resistance
Reduced friction for lower wear rates
Good load carrying
Wide Operating temp range (-50°F to 350°F)
Excellent Corrosion Protection
Problems Solved
Poor Lubricant Oxidation Resistance
Excessive Metal-on-Metal Contact, Friction & Surface Wear
Metal Surface Corrosion Or Rust from Inferior Lubrication
Applications

Anderol® 456 can be used in a wide range of industrial lubricating applications, including but not limited to:
Impregnating fluid (sintered metal parts, wicks & bearings)
Measuring and automatic dispensing pumps
Low temperature lubricating oil
Light duty gear oil 
Mold and die release agent
Anti-friction bearing
General purpose light-to-medium viscosity lubricating oil

The following materials are recommended for use with Anderol® 456: Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, and PBT.

The following materials are not recommended for use with Anderol® 456: Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC or ABS.