Halocarbon® 1.8 Oil is a high-performance reactive gas lubricant with a low viscosity of 1.8 cSt at 37.8°C. It is formulated with a low-molecular-weight polychlorotrifluoroethylene (PCTFE) polymer.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥133
Density, g/mL: 1.82
Water solubility: Insoluble
Pour point, °C: -93
Cloud point, °C: <-93
Viscosity, cSt @ 37.8°C: 1.8
Viscosity, cSt @ 71.1°C: 1.1
Refractive index: 1.395
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 1.8 Oil is a high-performance reactive gas lubricant with a low viscosity of 1.8 cSt at 37.8°C.
Halocarbon® 1.8 Oil is a low-viscosity, synthetic polychlorotrifluoroethylene (PCTFE) fluid produced by controlled polymerization and engineered for applications requiring chemically inert, nonflammable lubrication performance in reactive or demanding operating environments. With a viscosity of 1.8 cSt at 37.8°C and a density of 1.82 g/mL, this water-white fluid provides excellent lubricity, extreme thermal stability, and low compressibility across a wide temperature range. Halocarbon® 1.8 Oil is safe for use with various reactive gases, such as chlorine, oxygen, and other aggressive gases. Its low pour point of -93°C facilitates reliable performance in aerospace, cryogenic, nuclear, and other low-temperature applications.
Halocarbon® 1.8 Oil is also available with anticorrosion additives upon request.
Appearance: Liquid
Color: Water white
pH: Neutral
Boiling point, °C: ≥133
Density, g/mL: 1.82
Water solubility: Insoluble
Pour point, °C: -93
Cloud point, °C: <-93
Viscosity, cSt @ 37.8°C: 1.8
Viscosity, cSt @ 71.1°C: 1.1
Refractive index: 1.395
CAS No. 9002-83-9
Primary Chemistry:
Halocarbon® 1.8 Oil is a high-performance reactive gas lubricant with a low viscosity of 1.8 cSt at 37.8°C.
Thermal stress and fluid degradation in high-temperature conditions
High volatility of traditional fluids such as hydrocarbons, silicones, etc.
Poor safety properties of other lubricants and fluids containing hazardous ingredients
Poor material compatibility of fluids with plastics, polymers, metals, or elastomers
Reduced operational efficiency from the chemical breakdown of fluids
Rust or corrosion of equipment parts
Breakdown of lubricants and fluids in reactive chemical systems
Hazardous reactions in oxygen, chlorine, or other reactive gases
Reactive gas service applications
Aerospace Lubricants
Wire drawing fluids
Suspension fluids
Biological staging oils
Hydraulic fluids
Instrument Fill Fluid
Low temperature baths
Metalworking fluids
Chemical manufacturing
Compressor applications
Vacuum pump fluids
Mechanical seal barrier fluids
Low temperature calibration applications
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Europe, Middle East, Africa
