There are no products found that meet this criteria.

• 

  2-Ethylhexyl Acrylate

  2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.

  Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 399.92lb Drum

• 

  AAA (Acetoacetanilide)

  White powder that is used in conjunction with styrenated resins to form pigments and agricultural chemicals.

  Eastman™ AAA is often used as an intermediate to manufacture pigments, dyes, and fungicides. When used as a copromoter can be blended with DMAA at a 70/30 (DMAA/AAA) ratio resulting in superior performance compared to DMA in equal concentrations in resins utilizing neopentyl glycol. Appearance: White to off-white powder Assay: 99.8% Specific gravity @ 20°C/20°C: 1.26 Flash point open cup: 167°C (332°F) Flash point closed cup: 150°C (302°F) Fire point: 178°C (352°F) CAS: 102-01-2 Low color and toxicity as a copromoter Accelerates reactions in polyester resins and pigment manufacturing Good performance in producing yellow pigments Used as an intermediate for pigments, dyes, paints, graphic arts and agricultural chemicals. AAA is also used as a co-promoter for unsaturated polyesters.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 200lb Drum

• 

  CHDM D

  Offered white waxy solid form. Requires a hot room or drum heater to melt the contents for removal.

  Eastman™ CHDM-D is a cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It is often used in conjunction with Eastman NPG™ as a glycol modifier for resins. Appearance: White waxy solid Viscosity @ 23°C: 877 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-8 Hardness and Flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as building materials, coil coatings, contruction chemicals, machinery coatings, paints, drink packaging, polymer modification, and protective coatings.

  Manufacturer: Eastman | Product Line: Eastman Resin Intermediates | Package Sizes: 419lb Drum

• 

  CHDM D90

  In solution of approximately 90% by weight CHDM-D and 10% water. Solution is liquid at room temperature for easier handling.

  Eastman™ CHDM-D90 is a cycloaliphatic glycol in liquid form at room temperature. Used mostly to make saturated and unsaturated polyester resins. The 10 weight percent water in CHDM-D90 is removed during heating of the resin reaction process. Can also be used as a glycol modifier with Eastman NPG™ for resins. Appearance: Slightly hazy liquid Viscosity @ 23°C: 915 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-9 (90%) CAS: 7732-18-5 (10%) Hardness and flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as automotive coatings, paints, industrial coatings, protective coatings, and process additives.

  Manufacturer: Eastman | Product Line: Eastman Resin Intermediates | Package Sizes: 452lb Drum

• 

  DMAA (Dimethylacetoacetamide)

  Liquid containing 20% water, used as a general-purpose copromoter for many unsaturated polyester formulations.

  Eastman™ DMAA (N-Dimethylacetoacetamide) is a low color generating copromotor in many resin based formulations. It has shown better performance compared with DMA as a copromoter at equivalent treat rates in PG, NPG, and other glycols. Appearance: Liquid Assay: 79-83 wt% Specific gravity @ 20°C/20°C: 1.06 Flash point open cup: 122°C (252°F) Water: 17-21 wt% Molecular weight: 129.2 CAS: 2044-64-6 Low color and toxicity Easy handling with liquid form Used as a copromoter for paints and coatings and intermediate manufacturing for agricultural chemicals.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 475lb Drum

• 

  EAA Kosher

  Tautomer at room temperature, its a colorless liquid with a fruity odor.

  Eastman™ EAA consists of 8% enol and 92% keto commonly used as a low color-generating copromoter to formulate unsaturated polyester resins. It is soluble in common organic solvents and water to fit many application needs. Appearance: Liquid Molecular weight: 130.14 cP Flash point: 68°C (157°F) Boiling point: 180.8°C (357.4°F) Melting point: -45°C Specific gravity @ 20°C/20°C: 1.03 CAS: 105-45-3 Kosher certified Fruity odor Low color Readily soluble in styrenated resins Used as a copromoter in paints and coatings and used as an intermediate for herbicides and insecticides.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 463lb Drum

• 

  Glacial Acrylic Acid

  Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 470lb Drum

• 

  Lithium Carbonate ACS Grade

  Lithium Carbonate ACS grade is an additive in specialty glasses and ceramics that meets ACS reagent grade specifciations and contains a minimum of 99% lithium carbonate by weight.

  Lithium carbonate ACS and Tech grades are free-flowing, odorless white powders with a relatively fine particle size and a minimum of 99% active by weight Molecular weight 73.89 Density @ 20°C 2.094 g/cm3 Melting point 720°C Specific heat @ 25°C 0.315 cal/g/°C Standard heat of formation -290.64 kcal/mole Heat of fusion 10.7 kcal/mole Water solubility @ 20°C 1.3 wt% Lowers melting point of glass and enamel formulations Lowers viscosity of glass and enamel formulations Decreases the coefficient of thermal expansion of glass and ceramics Additive in specialty glasses and low expansion ceramics

  Manufacturer: Livent Lithium | Product Line: Livent Lithium Carbonate | Package Sizes: 220.5lb Drum

• 

  Lithium Carbonate Technical Grade

  Lithium Carbonate Technical Grade is a micronized, high-purity product guaranteed with 99.3 wt% of lithium carbonate and a 5 µm D50 particle size.

  Lithium carbonate ACS and Tech grades are free-flowing, ordorless white powders with a relatively fine particle size Molecular weight 73.89 Melting point 720ºC Water solubility @ 20°C 1.3 wt% Lowers melting point of glass and enamel formulations Lowers viscosity of glass and enamel formulations Decreases the coefficient of thermal expansion of glass and ceramics Raw material for glass, ceramics, and enamel industries; catalyst for esterification; additive in aluminum electrolysis melts; additive for quick setting cements and grouts;

  Manufacturer: Livent Lithium | Product Line: Livent Lithium Carbonate | Package Sizes: 220.5lb Drum, 50lb Bag

• 

  MAA (Methyl Acetoacetate)

  Copromoter for unsaturated polyesters, typically used in pharmaceuticals, fragrances and pesticides.

  Eastman™ MAA (Methyl Acetoacetate) is a colorless liquid used mostly as an intermediate for agricultural and pharmaceutical chemicals. MAA develops desirable hardness more rapidly than resins copromoted with DMA at equivalent treat rates. Appearance: Liquid Molecular weight: 116.1 Flash point: 74°C (165°F) Boiling point: 166°C (331°F) Melting point: -55°C Specific gravity @ 20°C/20°C: 1.078 CAS: 105-45-3 Low toxicity Low viscosity Extended gel time compared with DMA Does not impart brown color to polyesters compared to amine promoters Readily soluble in styrenated resins Used as a process solvent and intermediate manufacturing for herbicides, insecticides, and pharmaceutical chemicals.

  Manufacturer: Eastman | Product Line: Eastman Diketene Derivatives | Package Sizes: 463lb Drum

• 

  Methyl Acrylate

  Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 429.9009lb Drum