Low solution viscosity with excellent solubility, adjust final pH to 6-7 to improve stability.
Eastman™ AAEM is a methacrylic monomer used in high-solid acrylic resins and acrylic emulsion formulations resulting in lower VOC emissions. This product is commonly used to react with amines and hydrazides to make monomers for self-crosslinkable, room temperature cure acrylic emulsions. Appearance: Clear, light yellow liquid Viscosity @ 25°C: 6.9 cP Flash point: 134°C (273°F) Specific gravity @ 25°C/25°C: 1.12 AAEM: 95.0 wt % min HEMA: 4.0 wt % max Methacrylic acid: 0.5 wt % max CAS: 21282-97-3 Excellent flexibility and corrosion resistance Reduces viscosity in resins for lower VOC emissions Improves adhesion to metal substrates Used in applications such as automotive oems, polymers and plastics.
Offered white waxy solid form. Requires a hot room or drum heater to melt the contents for removal.
Eastman™ CHDM-D is a cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It is often used in conjunction with Eastman NPG™ as a glycol modifier for resins. Appearance: White waxy solid Viscosity @ 23°C: 877 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-8 Hardness and Flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as building materials, coil coatings, contruction chemicals, machinery coatings, paints, drink packaging, polymer modification, and protective coatings.
In solution of approximately 90% by weight CHDM-D and 10% water. Solution is liquid at room temperature for easier handling.
Eastman™ CHDM-D90 is a cycloaliphatic glycol in liquid form at room temperature. Used mostly to make saturated and unsaturated polyester resins. The 10 weight percent water in CHDM-D90 is removed during heating of the resin reaction process. Can also be used as a glycol modifier with Eastman NPG™ for resins. Appearance: Slightly hazy liquid Viscosity @ 23°C: 915 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-9 (90%) CAS: 7732-18-5 (10%) Hardness and flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as automotive coatings, paints, industrial coatings, protective coatings, and process additives.
Waterfree polyethylenimine with a molecular weight around 2,000.
Lupasol® PR 8515, is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Avg molar mass: 2,000 Viscosity: 14,000 Concentration: 98% Color: clear, colorless to rarely slightly yellowish liquid Compatible with cationic and nonionic systems Absorbs strongly on negatively charged surfaces Crosslinking agent Anhydrous Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.
A 100% solids, solvent-free, two component polyurethane adhesive system with a viscosity of 2,500-3,500 cPs.
Mor-Free™ L 75-164 is a two-component polyurethane adhesive system that is solvent-free and 100% solids, that can be applied at room temperature. As the reactivity of Mor-Free™ L 75-164 is high, the laminates can generally be further processed in as little as six hours. The chemical curing is generally completed within 3 days using C-411 co-reactant or 5 days using C-132-2 at room temperature (72 °F). Application Method : Smooth roll transfer Coreactant : C132-2, C-411 Coating Weight : 0.8-1.3 lbs/ream Chemistry : Polyurethane Color: Clear Yellow Liquid Density: 9.5 lbs/gallon Mix Ratio: 100:63 with C-132-2, 100:40 with C-411 Shelf Life: 360 days Applied Solids: 100 % Supplied Solids: 100 % Cure Time: 5 days at 77 °F Mixed Viscosity: 1,300 cPs @ 110 °F Nip Temperature: 120-140 °F Nominal Application Temperature: 122-140 °F Post Process Time: 4-8 hrs time to slit Pot Life : 45 minutes at 110 °F Viscosity: 2,500-3,500 cPs Rapid bond development to decrease time needed for processing Adhesion to high slip films Moisture resistance Easy clean-up High heat resistance Low nip temperature Adhesion to foil and metallized films High chemical resistance Fast slitting time Used for a wide range of applications including hot fill and boil-in-bag. Polyolefin films, including LDPE to LDPE, OPP to OPP, and OPP to LDPE, as well as Nylon, Polyester, and other packaging substrates. The films may be unprinted, or reverse printed with the appropriate laminating grade inks.
Provides excellent weathering and fluidization characteristics.
Eastman NPG™ platelets is a glycol commonly used for high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It can be used as the sole glycol component or used in conjunction with other modifiers to achieve your desired properties. It can be used for food contact coatings in the United States under feral food additive regulations. Appearance: White platelets Molecular weight: 104.15 Crystallization point: 31°C (88°F) Melting point: 124-130°C (255-266°F) Boiling point: 210°C (410°F) Flash point: 132°C (270°F) Specific gravity @ 20°C/20°C: 1.06 CAS: 126-30-7 Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.
SS4191B methyl hydrogen crosslinker for SS4191 system.
Component system to produce a coating bath. Use proper components for optimal stability when formulating a bath. Reference processing recommendations for suggested formulations as well as blending/mixing instructions. Haze: 10 max. Appearance: OK Color apha: 15 max. Weight loss: 7-10% Base component of a solvent-borne coating Produces premium release coating for silicones Excellent release properties against toughest adhesives Defect-free low-coat-weight liners Easily applied using Mayer rod technique
SS4300C is compatible with most vinyl functional silicone based polymers. works well with SL6100 polymers.
SilForce™ is a great solution for advanced technologies in release coatings. Most often seen in labels, tapes or liners, these products have an extensive set of applications and can be used in many formulations. Viscosity: 15-30 cstks @25°C Specific Gravity: 1.01 Density: 8.34 lbs/gal Solvent less coatings Excellent anchoring Low-viscosity
Reagent used in coatings utilizing polyesters, acrylics, cellulosics, and epoxies.
Eastman™ TBAA (T-Butyl-Acetoacetate) provides room temperature cure and isocyanate-free crosslinking in many coating applications. It can also be used as a reagent in pharmaceuitical, agrichemical, and pigment applications. Appearance: Liquid Molecular weight: 158.20 Flash point: 66°C (151°F) Boiling point: 190°C (374°F) Specific gravity @ 20°C/20°C: 0.954 CAS: 1694-31-1 Increased adhesion to metal substrates Low glass transition resulting in increased coating flexibility Reacts with conventional crosslinkers Reduces viscosity in resins to meet lower VOC emissions Used in adhesives, sealants, architectural coatings, paints, coatings, and intermediate manufacturing in pharmaceuiticals and agriculture.
A reactive organic alkoxy titanate with 100% active content less sensitive to moisture than Tyzor TPT and TnBT
Similar to Tyzor BTP TiO2 Content: 12.7% Active Content: 100 % Color: Colorless to Yellow Density (20C): 1.03 g/mL Viscosity (20C): 3500 mPa*s Pour Point: -55C Flash Point: 40C Solubility in Solvents: Miscible in most organic solvents Solubility in Water: Decomposes Similar to Tyzor BTP It can also act as a binder itself, used as an additive in sealants to crosslink -OH or -COOH functional polymers, binders or promote adhesion.
Tyzor™ PITA SM is a mixture of titanium ethyl acetoacetate complex with 100% active content and methyl-trimethoxy silane.
Tyzor PITA-SM is designed as a curing agent for silicone based sealants and adhesives. Its high reactivity at low temperatures enables it to react with common functional groups such as R-OH, M-OH, SiOH, or R-COOH to effect cure rate, crosslinking and adhesion promotion. TiO2 Content: ca. 15.2% Active Content: ca. 80% Color: Yellow to Orange Density (20 C): ca. 1.08 g/ml Viscosity (20 C): ca. 8 mPa*s Pour Point: < -10 C Boiling Point: ca. 102 C (Solvent) Flash Point: ca. 32 C Solubility in Solvents: Miscible in most organic solvents Solubility in water: Decomposes Tyzor PITA-SM in silicone sealants and adhesives promotes adhesion, crosslinks silanes, increases cure rate and acts as a drying agent. It can also provide these benefits when used with silanol end-capped polymers such as polypropylene oxides, acrylates, or polyurethanes. They can also be used as additives in paints to cross-link functional polymers or binders, act as binders or promote adhesion.
UV9315 is a very reactive polymer, it is often blended with UV9380C or UV9390 in a photo catalyst solution prior to use. It also provides easy to medium release from rubber and acrylic based adhesives.
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Solids: >99% Viscosity: 250 cstk @ 25°C Epoxy equivalent weight: 1150 grams/mole oxirane Specific gravity: 0.99 Fast UV cure Low temperature cure Minimal silicone transfer Non-toxic
Intended to be used with UV9300, UV9315, UV9400, UV9430, UV9440E, and UV9500 as a photoinitiator.
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 100 cstks @ 25°C Specific gravity: 1.06 @ 25°C Lbs/gal: 9.1 @ 25°C Antimony: 6.5 - 7.0 wt % Wavelength: 255, 385 lambda max, (nm) Fast UV cure Efficient cure at low temperatures Low toxicity Low viscosity Easy to handle
UV9390C is a photo catalyst designed to be used with Silforce™ UV cure release system. Used in 1 to 4 parts of UV 9390C per 100 parts of coating for optimal performance.
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 100 cstks @ 25°C Specific gravity: 1.06 @ 25°C Lbs/galons: 9.14 @ 25°C UV absorption peaks: 255 nm (major peak); 385 nm (minor peak) Compatible with non-polar cationic curing systems Shelf-stability for a year Easy to handle Low viscosity Low toxicity
Same as UV9300 except viscosity is 225 mPa.S @ 25°C
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. % Solids: >99% Viscosity: 225 cstks @ 25°C Epoxy Equivalent Weight: 1700 grams/mole oxirane Fast UV cure Low temperature cure Low silicone transfer Flat release profile Non toxic Low viscosity
UV9340 is a controlled release polymer. Most efficient when used with UV9315 or UV9400.
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 500 cstk @ 25°C Specific gravity: 0.999 @ 25°C Lbs/gallon: 8.34 Epoxy equivalent weight: 1300 grams/mole oxirane Fast photo cure in ambient atmosphere Low temperature cure Solvent-free Tight release
UV9700 is a viscosity modifier designed to be used with SilForce™ UV9XXX formulations.
UV cured products offer a cost-effective process method in low-temperature settings. Due to the various of products, multiple custom formulations are available depending on end needs. Viscosity: 5000 cstks @ 25°C Specific gravity: 0.99 @ 20°C Epoxy equivalent weight: 3800 grams/mole oxirane Raises viscosity Reduces initiation spike Well suited for UV9XXX systems Release from very aggressive adhesives