There are no products found that meet this criteria.

• 

  2-Ethylhexyl Acrylate

  2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.

  Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 399.92lb Drum

• 

  Butyl Acrylate

  Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.

  Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 410.0593lb Drum

• 

  ETHOCEL™ Standard 10 Industrial

  ETHOCEL™ Standard 10 Industrial is a thickener for solvent based systems. It is an ethylcellulose with a high purity and provides consistent performance.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 10 Premium

  ETHOCEL™ Standard 10 Premium is Pharma compliant and similar to ETHOCEL™ Standard 10 Industrial.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 10 has a low viscosity of 10 cP and an ethoxyl content of 49%. Viscosity: 9.0 - 11.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Pharma compliant Organosoluble Thermoplastic Highly compatible with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 100 Industrial

  ETHOCEL™ Standard 100 Industrial is a solvent based cellulose ether thickener. It has a ethoxyl content of 49% and yields a viscosity of 100 cP at moderate addition level.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 90.0 - 110.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 20 Industrial

  ETHOCEL™ Standard 20 Industrial is a solvent based cellulose thickener with a viscosity of 20 cP.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 20 an ethoxyl content of 49%. Viscosity: 18.0 - 22.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 200 Industrial

  ETHOCEL™ Standard 200 Industrial is solvent based thickener. It is a cellulose ether yielding a viscosity of 200 cP at moderate addition level.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 180.0 - 220.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 18.14kg Bag, 40lb Bag

• 

  ETHOCEL™ Standard 300 Industrial

  ETHOCEL™ Standard 300 Industrial is cellulose ether thickener for solvent based systems. It has the highest viscosity of the ETHOCEL™ range.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, binder and film former. It is soluble in most common solvents and compatible with most plasticizers. Viscosity: 270.0 - 330.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 18.14kg Bag, 40lb Bag

• 

  ETHOCEL™ Standard 4 Industrial

  ETHOCEL™ Standard 4 Industrial is a cellulose ether thickener for solvent based systems. With 4 cP, it has the lowest viscosity of the ETHOCEL™ range.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is mainly used in coatings, adhesives, conductive inks and electronics. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 4 has a low viscosity of 4 cP and an ethoxyl content of 49%. Viscosity: 3.0 - 5.5 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 45 Industrial

  ETHOCEL™ Standard 45 Industrial is a cellulose ether thickener for solvent based systems. It has a ethoxyl content of 49% and a viscosity of 45 cP.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.15% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  ETHOCEL™ Standard 45 Premium

  ETHOCEL™ Standard 45 Premium is Pharma compliant and has the same properties as ETHOCEL™ Standard 45 Industrial.

  ETHOCEL™ Standard 45 Premium is a solvent soluble cellulose ether thickener. It has a ethoxyl content of 49% and a viscosity of 45 cP. ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. Viscosity: 41.0 - 49.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% wt Max Residue on Ignition: 0.040% wt Max Pharma compliant with USP, NF, EP, JPE, FCC Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 50lb Bag

• 

  ETHOCEL™ Standard 7 Industrial

  ETHOCEL™ Standard 7 Industrial is an ethylcellulose polymer with a viscosity of 7 cP and yields an ethoxyl content of 49%.

  ETHOCEL™ acts as binder, tough & flexible film former, water-barrier and rheology modifier. It is used in coatings, adhesives, conductive inks and electronics. ETHOCEL™ has a narrow specification enabling consistent performance. Ethylcellulose functions as a thermoplastic polymer, is soluble in most common solvents and compatible with most plasticizers. ETHOCEL™ Standard 7 has a low viscosity of 7 cP and an ethoxyl content of 49%. Viscosity: 6.0 - 8.0 mPa.s Ethoxyl content, assay: 48.0-49.5% wt Loss on drying, moisture: 2.0% wt Max Chloride (as NaCl): 0.05% Max Organosoluble Thermoplastic High compatibility with plasticizers and solvents Low sodium content Low ash content Colorless Clean burnout

  Manufacturer: DuPont | Product Line: Ethocel™ Solvent-Soluble Polymers | Package Sizes: 22.68kg Bag, 50lb Bag

• 

  Glacial Acrylic Acid

  Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 470lb Drum

• 

  Methyl Acrylate

  Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.

  Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations

  Manufacturer: BASF | Product Line: Basf Acrylic Monomers | Package Sizes: 429.9009lb Drum

• 

  Sodium PYRION™ 40%

  Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.

  Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.

  Manufacturer: Janssen PMP | Product Line: Janssen Pmp Microbial Control | Package Sizes: 1200kg Tote, 200kg Drum