2-Ethylhexyl Acrylate (2-EHA) is insoluble in water but also less dense than water. It has a sweet pleasant odor, is clear and color less.
Building blocks for polymer manufacturing and as a feedstock for chemical synthesis. Appearance: clear and colorless Physical Form: liquid Odor: sweet Molar Mass: 184.3 Assay (Gas chromatography) - min 99.6% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions
Butyl acrylate (BA) is an acrylic acid ester with a sharp pungent odor. It is somewhat less dense than water and forms a slick surface on water.
Building blocks for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: pungent Molar Mass: 128.2 Assay (Gas chromatography) - min 99.5% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.01% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Forms copolymers and homopolymers Useful for feedstock synthesis Very slightly soluble in water
Excellent thermal stability for lower resin color and good humidity resistance.
Eastman™ CHDA HP is a cycloaliphatic diacid that offers many benefits to polyester resins for coatings and fiberglass-reinforced plastics. CHDA is approved in US and Europe for use in polyester resins to be used in food contact coatings. Appearance: White to off-white powder Viscosity @ 25°C: 6.9 cP Flash point: 235°C (455°F) Melting point: 164-167°C (327-333°F) Specific gravity @ 20°C/20°C: 1.38 Solubility in water @ 20°C: 1 wt% CAS: 1076-97-7 Rapid esterification Low resin color Harness and flexibility blaance Improved corrosion and stain resistance Better hydrolytic stability Great gloss retention and prevents yellowing Used in polyester resins for coatings and fiberglass-reinforced plastics. Can also be used in improving performance in waterborne, high solids, powder coatings, and coil coating applications.
Offered white waxy solid form. Requires a hot room or drum heater to melt the contents for removal.
Eastman™ CHDM-D is a cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It is often used in conjunction with Eastman NPG™ as a glycol modifier for resins. Appearance: White waxy solid Viscosity @ 23°C: 877 cP Flash point: 167°C (333°F) Boiling point: 284-288°C (543-550°F) Melting point: 41-61°C (106-142°F) Specific gravity @ 20°C/20°C: 1.02 CAS: 105-08-8 Hardness and Flexibility balance High crystallinity Excellent humidity and corrosion resistance Good heat resistance Highly reactive hydroxyl groups Rapid esterification and cure Used in many applications such as building materials, coil coatings, contruction chemicals, machinery coatings, paints, drink packaging, polymer modification, and protective coatings.
Liquid containing 20% water, used as a general-purpose copromoter for many unsaturated polyester formulations.
Eastman™ DMAA (N-Dimethylacetoacetamide) is a low color generating copromotor in many resin based formulations. It has shown better performance compared with DMA as a copromoter at equivalent treat rates in PG, NPG, and other glycols. Appearance: Liquid Assay: 79-83 wt% Specific gravity @ 20°C/20°C: 1.06 Flash point open cup: 122°C (252°F) Water: 17-21 wt% Molecular weight: 129.2 CAS: 2044-64-6 Low color and toxicity Easy handling with liquid form Used as a copromoter for paints and coatings and intermediate manufacturing for agricultural chemicals.
A 20% propylene glycol solution that is intended for geothermal heat pump systems.
A ready to use solution that contains specially designed corrosion inhibitors that meet ASTM D1384 corrosion protection requirements. The low glycol content provides lower viscosity and higher heat transfer efficiency. This fluid has a freezing point of 18.5°F. Recommended Use Temperature Range: -5ºC (23ºF) to 100ºC (212ºF) Typical Properties of DOWFROST GEO 20 Fluid: Composition (% by volume) Propylene Glycol – 20 Performance Additive + Water – 80 Color – Yellow to Green Specific Gravity – 1.017 - 1.027 25 / 25ºC (77 / 77 º F) pH of Solution – 9.5 - 10.5 Reserve Alkalinity (min.) – 3.5 ml Formulated for geothermal systems Intended for use in Geothermal heating and cooling systems
or beverage application.
A formulation of propylene glycol and a specially designed package of industrial corrosion inhibitors. The fluid is dyed fluorescent yellow to aid in leak detection. Not approved by the USDA or FDA for food use, and is not suitable for food...
DOWFROST™ HD inhibited propylene glycol (PG) is comprised of about 94% PG and 6% corrosion inhibitors. The lower PG content in DOWROST™ HD allows for additional corrosion inhibitors including some which are not approved by FDA as direct food additives. These additional components do not compromise toxicity fluid and provide an enhanced level of corrosion protection which is unsurpassed in the industry. DOWFROST™ HD has a fluorescent yellow color and is capable of operating at higher temperatures than regular DOWFROST™: from 0 F to 325 F. DOWFROST™ HD is intended for low toxicity, non-food processing applications and provides freeze protection down to -60 F. Dowfrost™ HD is offered is various concentrations and package sizes. Color: Green / Yellow Propylene glycol-based fluid Propylene glycol-based fluid (94%) Fluorescent yellow Increased concentration of inhibitors Not USDA/FDA approved industrial / commercial version of DOWFROST Operating range: 0 to 325° F for heat transfer -60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)
A formulation of ethylene glycol that features one of the highest maximum use temperature of any glycol, operating temperature ranges -60°F to 350°F. The fluid is dyed fluorescent orange to aid in leak detection.
DOWTHERM™ 4000 inhibited ethylene glycol (EG) is comprised of about 92% EG and 8% corrosion inhibitors and has a bright fluorescent orange color. The lower EG content allows for a higher concentration of corrosion inhibitors which in turn means DOWTHERM™ 4000 is capable of operating at higher temperatures than DOWTHERM™ SR1 i.e. from -20°F to 350°F. This makes DOWTHERM™ 4000 a higher end, niche type product which is also capable of providing freeze protection down to -60°F. Ethylene glycol-based fluid (92%) Fluorescent orange Increased concentration of inhibitors Efficient heat transfer Operating range: -20°F to 350°F for heat transfer 60°F for burst protection Wide-temperature range operability Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)
A formulation of ethylene glycol and a specially designed package of industrial corrosion inhibitors with operating temperature ranges of -60°F to 250°F. The fluid is dyed fluorescent pink for leak detection purposes.
DOWTHERM™ SR1 inhibited ethylene glycol (EG) is comprised of about 95% EG and 5% corrosion inhibitors. DOWTHERM™ SR1 is the most popular EG based product within the Dow portfolio. In fact, DOWTHERM™ SR1 is the most widely recognized brand name in the industry. It offers effective heat transfer over a wide temperature range: from -20°F to 250°F and provides freeze protection down to -60°F. Color: Pink Ethylene glycol-based fluid Ethylene glycol-based fluid (95%) Fluorescent pink Efficient heat transfer Operating range: -20°F to 250°F for heat transfer 60°F for burst protection Offered in various package sizes and blends. DOWTHERM™ SR-1 25% DOWTHERM™ SR-1 30% DOWTHERM™ SR-1 35% DOWTHERM™ SR-1 40% DOWTHERM™ SR-1 45% DOWTHERM™ SR-1 50% DOWTHERM™ SR-1 60% Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)
Tautomer at room temperature, its a colorless liquid with a fruity odor.
Eastman™ EAA consists of 8% enol and 92% keto commonly used as a low color-generating copromoter to formulate unsaturated polyester resins. It is soluble in common organic solvents and water to fit many application needs. Appearance: Liquid Molecular weight: 130.14 cP Flash point: 68°C (157°F) Boiling point: 180.8°C (357.4°F) Melting point: -45°C Specific gravity @ 20°C/20°C: 1.03 CAS: 105-45-3 Kosher certified Fruity odor Low color Readily soluble in styrenated resins Used as a copromoter in paints and coatings and used as an intermediate for herbicides and insecticides.
Storage stability inhibitor - extends shelf life with minimum effects on gel time (unsaturated polyesters).
Eastman™ DTBHQ (2,5-ditert-butylhydroquinone) is a crystalline solid that has low vapor pressure and short induction periods in peroxide-catalyzed polymerizations. Insoluble in water and caustic solutions, used as an antioxidant or co-inhibitor to prevent oxidation and extend shelf life in many industrial applications. Appearance: White to tan crystals Flash point: 216°C (420°F) Melting point: 215°C (419°F) Boiling point: 321°C (610°F) Specific gravity: 1.07 CAS: 88-58-4 Scavenges radicals slowly Storage stability inhibitor with minimum effect in gel time Stabilizes against odor and color development Used as a stopping agent in rubber emulsions and anti-skinning agent in paints.
Highly effective process inhibitor used in the production of highly reactive unsaturated polyesters.
Eastman™ THQ (Toluhydroquinone) is a tan to white crystalline solid that goes through similar chemical reactions as Hydroquinone. However, due to the presence of a methyl group in the ortho position, THQ becomes a highly active inhibitor in the free radical polymerization of vinyl monomers and unsaturated polyesters. Appearance: Off-white solid Flash point: 172°C (342°F) Boiling point: 279°C (534°F) Melting point: 127°C (261°F) Specific gravity: 1.3 Molecular weight: 124.13 CAS: 95-71-6 Better solubility in styrene than Hydroquinone Highly effective cook stabilizer in unsaturated polyesters Good performing antioxidant for oleates, linseed oil, and other nonfood fats and oils Used as an inhibitor, antioxidant, and intermediate manufacturing.
Glacial acrylic acid (GAA) is a unsaturated monocarboxylic acid. It exhibits a pungent odor, and is clear and color less.
Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical form: liquid at >13degC Odor: pungent Molar Mass: 72.1 Assay (Gas chromatography) - min 99.5 Water Content (ASTM E 203) - max. 0.1% Color on despatch (ASTM D 1209) - max. 20 Standard Stabilization (ASTM D 3125) 200+/- 20 ppm MEHQ Easily reacts with vinyl compounds Unsaturated carboxylic acid Stabilized with 200 ppm of MEHQ Supplied in stable form
Waterfree polyethylenimine with a molecular weight around 2,000.
Lupasol® PR 8515, is a waterfree multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials. Avg molar mass: 2,000 Viscosity: 14,000 Concentration: 98% Color: clear, colorless to rarely slightly yellowish liquid Compatible with cationic and nonionic systems Absorbs strongly on negatively charged surfaces Crosslinking agent Anhydrous Miscible with water in all proportions Flowable liquids Ames negative No detectable ethylenimine importunity Three types of bonding: ionic, hydrogen and van der Waals Forces Adhesives, Complexing, Coatings and paints, Pigment manufacture, and Protein immobilization.
Copromoter for unsaturated polyesters, typically used in pharmaceuticals, fragrances and pesticides.
Eastman™ MAA (Methyl Acetoacetate) is a colorless liquid used mostly as an intermediate for agricultural and pharmaceutical chemicals. MAA develops desirable hardness more rapidly than resins copromoted with DMA at equivalent treat rates. Appearance: Liquid Molecular weight: 116.1 Flash point: 74°C (165°F) Boiling point: 166°C (331°F) Melting point: -55°C Specific gravity @ 20°C/20°C: 1.078 CAS: 105-45-3 Low toxicity Low viscosity Extended gel time compared with DMA Does not impart brown color to polyesters compared to amine promoters Readily soluble in styrenated resins Used as a process solvent and intermediate manufacturing for herbicides, insecticides, and pharmaceutical chemicals.
Methyl acrylate (MA) is an enoate ester. It's a volatile colorless liquid with a flash point of 27°F.
Building block for polymer manufacturing and chemical manufacturing. Appearance: clear and colorless Physical Form: liquid Odor: penetrating Molar Mass: 86 Assay (Gas chromatography) - min 99.8% Water Content (ASTM E 203) - max. 0.05% Acid Content (ASTM D 1613) - max. 0.009% Color on despatch (ASTM D 1209) - max. 10 Standard Stabilization (ASTM D 3125) 15+/- 5ppm MEHQ Readily undergoes addition reactions with a wide variety of organic and inorganic compounds Can be used as moisture barrier for latex formulations
Provides excellent weathering and fluidization characteristics.
Eastman NPG™ platelets is a glycol commonly used for high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics. It can be used as the sole glycol component or used in conjunction with other modifiers to achieve your desired properties. It can be used for food contact coatings in the United States under feral food additive regulations. Appearance: White platelets Molecular weight: 104.15 Crystallization point: 31°C (88°F) Melting point: 124-130°C (255-266°F) Boiling point: 210°C (410°F) Flash point: 132°C (270°F) Specific gravity @ 20°C/20°C: 1.06 CAS: 126-30-7 Excellent thermal stability for low resin color Excellent weathering Good chemical, stain, and humidity resistance Good hardness and flexibility balance Rapid reaction during esterification and cure Used as a raw material in intermediate manufacturing and many coating applications.
Antimicrobial preservative (sodium pyrithione) used in a variety of water-based functional fluids and coatings to protect against micro-organisms.
Sodium Pyrion is highly effective against micro-organisms. Often used in water based fluids such as metal working, hydraulic, industrial lubricants, and water based latex paint applications. The pyrithione chemistry is often used when stability and low leachability is critical. Able to be used in low doses, reduces treatment costs and can be used in post treatment or metalworking fluid concentrates. Appearance: Clear, yellow-brown liquid Specific Density: 1.10 - 1.24 g/ml pH-value : 1.19 - 1.24 g/ml Molecular weight: 149.15 Thermal stability: 250°C CAS number: 3811-73-2 EPA registered Low treat rates Non-leaching results with long term protection Ease of application in aqueous form Due to the effectiveness at low treat rates, Sodium Pyrion saves formulators time and money by gaining more antimicrobial effectiveness, while using less.
Reagent used in coatings utilizing polyesters, acrylics, cellulosics, and epoxies.
Eastman™ TBAA (T-Butyl-Acetoacetate) provides room temperature cure and isocyanate-free crosslinking in many coating applications. It can also be used as a reagent in pharmaceuitical, agrichemical, and pigment applications. Appearance: Liquid Molecular weight: 158.20 Flash point: 66°C (151°F) Boiling point: 190°C (374°F) Specific gravity @ 20°C/20°C: 0.954 CAS: 1694-31-1 Increased adhesion to metal substrates Low glass transition resulting in increased coating flexibility Reacts with conventional crosslinkers Reduces viscosity in resins to meet lower VOC emissions Used in adhesives, sealants, architectural coatings, paints, coatings, and intermediate manufacturing in pharmaceuiticals and agriculture.
A formulation of ethylene glycol and specifically designed inhibitor packages with operating temperature ranges of -60°F to 250°F.
Manufactured with 100% virgin ethylene glycol and specifically formulated with heavy-duty industrial inhibitor packages that prevent corrosion, these fluids are widely used for closed-loop, process heating and process cooling. The inhibitors are easily maintained, long lasting and replenishable, which means intervals between fluid change-outs are extended and fluid expense is minimized. Ethylene glycol-based fluid Wide temperature range operability HVAC; Oil & Gas; Immersion freezing; Process cooling; Process heating; Solar heating; Radiant Heating; Thermal Energy Storage; Geothermal; Snow Melt Systems; Fermentation Cooling
Formulated for high-temperature, liquid-phase heat transfer in systems requiring bulk temperatures up to 500°F.
UCON™ HTF 500 is compatible with most common metals, including all steels, iron, aluminum, copper and copper alloys and is noncorrosive. UCON™ HTF 500 has been used in many high temperature applications and is often recommended by heating equipment manufactures. Viscosity at 100°F: 62 Specific gravity: 1.038 Pour Point: -55 Boiling Point: None- nonvolatile liquid Flashpoint (ASTM D92): 575 Fire Point (ASTM D92): 600 Viscosity Index: 200 High heat transfer efficiency Water soluble Fantastic materials compatibility Long lasting Lower maintenance costs High flash point High fire point Easy to use with conventional equipment Chemical processing Laminating and calendaring rolls Dies and molds in the rubber and plastics industry Drying rolls and ovens Die-cast zinc and aluminum alloys Intended for use in closed circulating systems.
Aqueous solution of zinc pyrithione with low water solubility and highly effective for applications where low level of leaching and longevity of protection is required.
Zinc Pyrion MPF 48% is a Micronized Preservative Free suspension of Zn-Pyrithione in water. This wide range & highly active biocide inhibits the unwanted growth of fungi, yeast, mold, and other microbial organisms. Appearance: Off-white suspension Density at 21⁰C/70⁰F: 1.28 g/cm3 (10.68 lb/gal) Viscosity at 21⁰C/70⁰F: 157.5 mPa.s at 100s-1 Color: L*: min. 75, a*: -3 to +1, b*: max. 5 Particle size: D100 ≤ 5 μm; D90 ≤ 1 μm pH, 5% w/w in pH 7 water: 6.5 – 9.0 Zinc content: 9.3 – 11.3 % w/w Must store above 10⁰C (50⁰F) Degradation occurs at temperatures above 240⁰C EPA registered Exceptional microbial control in a wide range of applications Ease of application in aqueous solution Testing available to gauge efficacy of antimicrobial growth for final product Zinc pyrithione is commonly used to prevent degradation caused by microbial growth in a wide range of industrial applications. Formulations will differ by composition, application and susceptibility of microbial attack. It is recommended to test biocide levels at multiple treat rates (3000, 4000, 5000 ppm) to gauge efficacy in particular applications. Industry standard laboratory testing is available from Janssen to help with particular formulation questions.
Powdered dry-film preservative (zinc pyrithione) that provides antimicrobial protection in a wide variety of industrial applications.
Zinc Pyrion is a Zinc Pyrithione based preservative for protection against unwanted microbial growth and degradation. The powdered dry-film preservative can be used in a wide range of both indoor & outdoor applications that are susceptible to microbial attack. Typical Properties; Appearance: Light beige to beige powder Purity (Potentiometric Titration): Min. 97.0 wt.% Loss on Drying (105°C): Max. 2 wt.% Particle Size Distribution: D50: max. 10 μm; D99: max. 35 μm Relative Density: 1.8106 at 22.5°C Bulk Density: 0.41 g/ml pH: 6.5 - 8.5 (5% dispersion in water) Vapor Pressure: < 6.6 x 10-4 Pa at 25°C Solubility in Water: 4.93 mg/l at 20.0°C; 6.11 mg/l at 30.0°C Exceptional control against microbial growth Cost effective powder form Full control of formulated treat rate Free testing available to measure efficacy of anti-microbial protection Typical treat rate will vary by application, but it is recommended to test several levels (2000, 3000, 4000, 5000 ppm) to test efficacy of protection. Testing is available via Janssen's laboratory for several industry standard tests.